diff mbox series

[v2,4/5] clk: meson: meson8b: don't register the XTAL clock when provided via OF

Message ID 20191027161805.1176321-5-martin.blumenstingl@googlemail.com (mailing list archive)
State Superseded
Delegated to: Neil Armstrong
Headers show
Series provide the XTAL clock via OF on Meson8/8b/8m2 | expand

Commit Message

Martin Blumenstingl Oct. 27, 2019, 4:18 p.m. UTC 
The XTAL clock is an actual crystal on the PCB. Thus the meson8b clock
driver should not register the XTAL clock - instead it should be
provided via .dts and then passed to the clock controller.

Skip the registration of the XTAL clock if a parent clock is provided
via OF. Fall back to registering the XTAL clock if this is not the case
to keep support for old .dtbs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index b785b67baf2b..70ac6755607e 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -3682,10 +3682,16 @@  static void __init meson8b_clkc_init_common(struct device_node *np,
 		meson8b_clk_regmaps[i]->map = map;
 
 	/*
-	 * register all clks
-	 * CLKID_UNUSED = 0, so skip it and start with CLKID_XTAL = 1
+	 * always skip CLKID_UNUSED and also skip XTAL if the .dtb provides the
+	 * XTAL clock as input.
 	 */
-	for (i = CLKID_XTAL; i < CLK_NR_CLKS; i++) {
+	if (!IS_ERR(of_clk_get_by_name(np, "xtal")))
+		i = CLKID_PLL_FIXED;
+	else
+		i = CLKID_XTAL;
+
+	/* register all clks */
+	for (; i < CLK_NR_CLKS; i++) {
 		/* array might be sparse */
 		if (!clk_hw_onecell_data->hws[i])
 			continue;