@@ -127,7 +127,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
static struct platform_driver cros_ec_lid_angle_platform_driver = {
.driver = {
.name = DRV_NAME,
- .pm = &cros_ec_sensors_pm_ops,
},
.probe = cros_ec_lid_angle_probe,
.id_table = cros_ec_lid_angle_ids,
@@ -314,7 +314,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
static struct platform_driver cros_ec_sensors_platform_driver = {
.driver = {
.name = "cros-ec-sensors",
- .pm = &cros_ec_sensors_pm_ops,
},
.probe = cros_ec_sensors_probe,
.id_table = cros_ec_sensors_ids,
@@ -722,52 +722,5 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
}
EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write);
-static int __maybe_unused cros_ec_sensors_prepare(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
-
- if (st->curr_sampl_freq == 0)
- return 0;
-
- /*
- * If the sensors are sampled at high frequency, we will not be able to
- * sleep. Set sampling to a long period if necessary.
- */
- if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
- mutex_lock(&st->cmd_lock);
- st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
- st->param.ec_rate.data = CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY;
- cros_ec_motion_send_host_cmd(st, 0);
- mutex_unlock(&st->cmd_lock);
- }
- return 0;
-}
-
-static void __maybe_unused cros_ec_sensors_complete(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
-
- if (st->curr_sampl_freq == 0)
- return;
-
- if (st->curr_sampl_freq < CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY) {
- mutex_lock(&st->cmd_lock);
- st->param.cmd = MOTIONSENSE_CMD_EC_RATE;
- st->param.ec_rate.data = st->curr_sampl_freq;
- cros_ec_motion_send_host_cmd(st, 0);
- mutex_unlock(&st->cmd_lock);
- }
-}
-
-const struct dev_pm_ops cros_ec_sensors_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
- .prepare = cros_ec_sensors_prepare,
- .complete = cros_ec_sensors_complete
-#endif
-};
-EXPORT_SYMBOL_GPL(cros_ec_sensors_pm_ops);
-
MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions");
MODULE_LICENSE("GPL v2");
@@ -255,7 +255,6 @@ MODULE_DEVICE_TABLE(platform, cros_ec_light_prox_ids);
static struct platform_driver cros_ec_light_prox_platform_driver = {
.driver = {
.name = "cros-ec-light-prox",
- .pm = &cros_ec_sensors_pm_ops,
},
.probe = cros_ec_light_prox_probe,
.id_table = cros_ec_light_prox_ids,
@@ -30,9 +30,6 @@ enum {
*/
#define CROS_EC_SAMPLE_SIZE (sizeof(s64) * 2)
-/* Minimum sampling period to use when device is suspending */
-#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000 /* 1 second */
-
typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
/**
@@ -118,8 +115,6 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
struct iio_chan_spec const *chan,
int val, int val2, long mask);
-extern const struct dev_pm_ops cros_ec_sensors_pm_ops;
-
/* List of extended channel specification for all sensors */
extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[];
Since cros_ec_sensorhub is shutting down the FIFO when the device suspends, no need to slow down the EC sampling period rate. It was necesseary to do that before command CMD_FIFO_INT_ENABLE was introduced, but now all supported chromebooks have it. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> --- No changes in v3. New in v2. .../cros_ec_sensors/cros_ec_lid_angle.c | 1 - .../common/cros_ec_sensors/cros_ec_sensors.c | 1 - .../cros_ec_sensors/cros_ec_sensors_core.c | 47 ------------------- drivers/iio/light/cros_ec_light_prox.c | 1 - .../linux/iio/common/cros_ec_sensors_core.h | 5 -- 5 files changed, 55 deletions(-)