@@ -12,10 +12,8 @@
#define V2_CLOCK_RATE_SHIFT 3
#define V2_CLOCK_SRC_MASK 0x00000007
#define V2_CLOCK_SRC_SHIFT 0
-#define V2_CLOCK_TRAVELER_FETCH_DISABLE 0x04000000
-#define V2_CLOCK_TRAVELER_FETCH_ENABLE 0x03000000
-#define V2_CLOCK_8PRE_FETCH_DISABLE 0x02000000
-#define V2_CLOCK_8PRE_FETCH_ENABLE 0x00000000
+#define V2_CLOCK_FETCH_ENABLE 0x02000000
+#define V2_CLOCK_MODEL_SPECIFIC 0x04000000
#define V2_IN_OUT_CONF_OFFSET 0x0c04
#define V2_OPT_OUT_IFACE_MASK 0x00000c00
@@ -73,11 +71,6 @@ static int v2_set_clock_rate(struct snd_motu *motu, unsigned int rate)
data &= ~V2_CLOCK_RATE_MASK;
data |= i << V2_CLOCK_RATE_SHIFT;
- if (motu->spec == &snd_motu_spec_traveler) {
- data &= ~V2_CLOCK_TRAVELER_FETCH_ENABLE;
- data |= V2_CLOCK_TRAVELER_FETCH_DISABLE;
- }
-
reg = cpu_to_be32(data);
return snd_motu_transaction_write(motu, V2_CLOCK_STATUS_OFFSET, ®,
sizeof(reg));
@@ -145,42 +138,49 @@ static int v2_get_clock_source(struct snd_motu *motu,
static int v2_switch_fetching_mode(struct snd_motu *motu, bool enable)
{
+ enum snd_motu_clock_source src;
__be32 reg;
u32 data;
int err = 0;
- if (motu->spec == &snd_motu_spec_traveler ||
- motu->spec == &snd_motu_spec_8pre) {
- err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET,
- ®, sizeof(reg));
+ // 828mkII implements Altera ACEX 1K EP1K30. Nothing to do.
+ if (motu->spec == &snd_motu_spec_828mk2)
+ return 0;
+
+ err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET, ®,
+ sizeof(reg));
+ if (err < 0)
+ return err;
+ data = be32_to_cpu(reg);
+
+ err = get_clock_source(motu, data, &src);
+ if (err < 0)
+ return err;
+
+ data &= ~(V2_CLOCK_FETCH_ENABLE | V2_CLOCK_MODEL_SPECIFIC);
+ if (enable)
+ data |= V2_CLOCK_FETCH_ENABLE;
+
+ if (motu->spec->flags & SND_MOTU_SPEC_SUPPORT_CLOCK_X4) {
+ // Expected for Traveler and 896HD, which implements Altera
+ // Cyclone EP1C3.
+ data |= V2_CLOCK_MODEL_SPECIFIC;
+ } else {
+ // For UltraLite and 8pre, which implements Xilinx Spartan
+ // XC3S200.
+ unsigned int rate;
+
+ err = get_clock_rate(data, &rate);
if (err < 0)
return err;
- data = be32_to_cpu(reg);
-
- if (motu->spec == &snd_motu_spec_traveler) {
- data &= ~(V2_CLOCK_TRAVELER_FETCH_DISABLE |
- V2_CLOCK_TRAVELER_FETCH_ENABLE);
-
- if (enable)
- data |= V2_CLOCK_TRAVELER_FETCH_ENABLE;
- else
- data |= V2_CLOCK_TRAVELER_FETCH_DISABLE;
- } else if (motu->spec == &snd_motu_spec_8pre) {
- data &= ~(V2_CLOCK_8PRE_FETCH_DISABLE |
- V2_CLOCK_8PRE_FETCH_ENABLE);
-
- if (enable)
- data |= V2_CLOCK_8PRE_FETCH_DISABLE;
- else
- data |= V2_CLOCK_8PRE_FETCH_ENABLE;
- }
- reg = cpu_to_be32(data);
- err = snd_motu_transaction_write(motu, V2_CLOCK_STATUS_OFFSET,
- ®, sizeof(reg));
+ if (src == SND_MOTU_CLOCK_SOURCE_SPH && rate > 48000)
+ data |= V2_CLOCK_MODEL_SPECIFIC;
}
- return err;
+ reg = cpu_to_be32(data);
+ return snd_motu_transaction_write(motu, V2_CLOCK_STATUS_OFFSET, ®,
+ sizeof(reg));
}
static void calculate_fixed_part(struct snd_motu_packet_format *formats,
@@ -172,7 +172,7 @@ static void motu_bus_update(struct fw_unit *unit)
snd_motu_transaction_reregister(motu);
}
-static const struct snd_motu_spec motu_828mk2 = {
+const struct snd_motu_spec snd_motu_spec_828mk2 = {
.name = "828mk2",
.protocol = &snd_motu_protocol_v2,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
@@ -187,7 +187,7 @@ static const struct snd_motu_spec motu_828mk2 = {
.analog_out_ports = 8,
};
-const struct snd_motu_spec snd_motu_spec_traveler = {
+static const struct snd_motu_spec motu_traveler = {
.name = "Traveler",
.protocol = &snd_motu_protocol_v2,
.flags = SND_MOTU_SPEC_SUPPORT_CLOCK_X2 |
@@ -202,7 +202,7 @@ const struct snd_motu_spec snd_motu_spec_traveler = {
.analog_out_ports = 8,
};
-const struct snd_motu_spec snd_motu_spec_8pre = {
+static const struct snd_motu_spec motu_8pre = {
.name = "8pre",
.protocol = &snd_motu_protocol_v2,
// In tx, use coax chunks for mix-return 1/2. In rx, use coax chunks for
@@ -270,9 +270,9 @@ static const struct snd_motu_spec motu_4pre = {
}
static const struct ieee1394_device_id motu_id_table[] = {
- SND_MOTU_DEV_ENTRY(0x000003, &motu_828mk2),
- SND_MOTU_DEV_ENTRY(0x000009, &snd_motu_spec_traveler),
- SND_MOTU_DEV_ENTRY(0x00000f, &snd_motu_spec_8pre),
+ SND_MOTU_DEV_ENTRY(0x000003, &snd_motu_spec_828mk2),
+ SND_MOTU_DEV_ENTRY(0x000009, &motu_traveler),
+ SND_MOTU_DEV_ENTRY(0x00000f, &motu_8pre),
SND_MOTU_DEV_ENTRY(0x000015, &motu_828mk3), /* FireWire only. */
SND_MOTU_DEV_ENTRY(0x000035, &motu_828mk3), /* Hybrid. */
SND_MOTU_DEV_ENTRY(0x000033, &motu_audio_express),
@@ -130,8 +130,7 @@ struct snd_motu_spec {
extern const struct snd_motu_protocol snd_motu_protocol_v2;
extern const struct snd_motu_protocol snd_motu_protocol_v3;
-extern const struct snd_motu_spec snd_motu_spec_traveler;
-extern const struct snd_motu_spec snd_motu_spec_8pre;
+extern const struct snd_motu_spec snd_motu_spec_828mk2;
int amdtp_motu_init(struct amdtp_stream *s, struct fw_unit *unit,
enum amdtp_stream_direction dir,
In MOTU FireWire series, devices which support protocol version 2 have several types of hardware design to process audio data frames for isoc packet. Roughly devices are categorized into three groups: - 828mkII - Traveler/896HD - UltraLite/8pre FireWire Some bit flags in register addressed by 0x'ffff'f000'0b14 includes device-specific effects. This commit cleanups implementation of protocol v2 in this point. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> --- sound/firewire/motu/motu-protocol-v2.c | 72 +++++++++++++------------- sound/firewire/motu/motu.c | 12 ++--- sound/firewire/motu/motu.h | 3 +- 3 files changed, 43 insertions(+), 44 deletions(-)