diff mbox series

[v4,6/7] dt-bindings: Add ANX6345 DP/eDP transmitter binding

Message ID 20191029153953.8EE9B68D04@verein.lst.de (mailing list archive)
State New, archived
Headers show
Series Add anx6345 DP/eDP bridge for Olimex Teres-I | expand

Commit Message

Torsten Duwe Oct. 29, 2019, 12:16 p.m. UTC
The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed
for portable devices.

Add a binding document for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 .../bindings/display/bridge/anx6345.yaml           | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.yaml

Comments

Maxime Ripard Oct. 31, 2019, 12:51 p.m. UTC | #1
On Tue, Oct 29, 2019 at 01:16:57PM +0100, Torsten Duwe wrote:
> The anx6345 is an ultra-low power DisplayPort/eDP transmitter designed
> for portable devices.
>
> Add a binding document for it.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Torsten Duwe <duwe@suse.de>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  .../bindings/display/bridge/anx6345.yaml           | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
> new file mode 100644
> index 000000000000..094e8e8a5faa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
> +
> +maintainers:
> +  - Torsten Duwe <duwe@lst.de>
> +
> +description: |
> +  The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
> +  portable devices.
> +
> +properties:
> +  compatible:
> +    const: analogix,anx6345
> +
> +  reg:
> +    maxItems: 1
> +    description: base I2C address of the device
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description: GPIO connected to active low reset
> +
> +  dvdd12-supply:
> +    maxItems: 1
> +    description: Regulator for 1.2V digital core power.
> +
> +  dvdd25-supply:
> +    maxItems: 1
> +    description: Regulator for 2.5V digital core power.
> +
> +  ports:
> +    anyOf:
> +      - port@0:
> +        description: Video port for LVTTL input
> +      - port@1:
> +        description: Video port for eDP output (panel or connector).
> +                     May be omitted if EDID works reliably.
> +    required:
> +      - port@0

Have you tried to validate those two ports in a DT?

I'm not quite sure what you wanted to express with that anyOf, but if
it was something like port@0 is mandatory, and port@1 is optional, it
should be something like this:

properties:

  ...

  ports:
    type: object

    properties:
      port@0:
        type: object
        description: |
	  Video port for LVTTL input

      port@1:
        type: object
        description: |
	  Video port for eDP output (..)

    required:
      - port@0

This way, you express that both port@0 and port@1 must by nodes, under
a node called ports, and port@0 is mandatory.

You should even push this a bit further by adding
additionalProperties: false to prevent a DT from having undocumented
properties and children for the main node and ports node.

Maxime
Torsten Duwe Oct. 31, 2019, 2:52 p.m. UTC | #2
On Thu, Oct 31, 2019 at 01:51:00PM +0100, Maxime Ripard wrote:
> On Tue, Oct 29, 2019 at 01:16:57PM +0100, Torsten Duwe wrote:
> > +
> > +  ports:
> > +    anyOf:
> > +      - port@0:
> > +        description: Video port for LVTTL input
> > +      - port@1:
> > +        description: Video port for eDP output (panel or connector).
> > +                     May be omitted if EDID works reliably.
> > +    required:
> > +      - port@0
> 
> Have you tried to validate those two ports in a DT?

Yes, it validates as expected, like I wrote. Various sources told me that
json-schema is not always straightforward so I assumed anyOf was OK.

> I'm not quite sure what you wanted to express with that anyOf, but if
> it was something like port@0 is mandatory, and port@1 is optional, it
> should be something like this:
> 
> properties:
> 
>   ...
> 
>   ports:
>     type: object
> 
>     properties:
>       port@0:
>         type: object
>         description: |
> 	  Video port for LVTTL input
> 
>       port@1:
>         type: object
>         description: |
> 	  Video port for eDP output (..)
> 
>     required:
>       - port@0
> 
> This way, you express that both port@0 and port@1 must by nodes, under
> a node called ports, and port@0 is mandatory.

That validates, too. Looks better, admittedly. I don't have a strong
opinion here. It's just that Rob wrote in
<CAL_JsqKAU3WG3L=KP8A8u4vW=q_BQWPN-m_c+ADOwTioJ2-cmg@mail.gmail.com>:

| For this case specifically, we do need to define a common graph
| schema, but haven't yet. You can assume we do and only really need to    
| capture what Maxime said above.
(your points back then were port@N descriptions and neccessity for port@0)

Are you sure that "object" is specific enough?

> You should even push this a bit further by adding
> additionalProperties: false to prevent a DT from having undocumented
> properties and children for the main node and ports node.

You mean like

| jsonschema.exceptions.SchemaError: Additional properties are not allowed ('unevaluatedProperties' was unexpected)
[...]
| On schema:
|    {'$id': 'http://devicetree.org/schemas/watchdog/allwinner,sun4i-a10-wdt.yaml#',
[...]
|      'unevaluatedProperties': False}

? ;-)

But yes, this patch series passes even with additionalProperties: false.

In which form would you like to receive the update?

	Torsten
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
new file mode 100644
index 000000000000..094e8e8a5faa
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -0,0 +1,92 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+
+maintainers:
+  - Torsten Duwe <duwe@lst.de>
+
+description: |
+  The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
+  portable devices.
+
+properties:
+  compatible:
+    const: analogix,anx6345
+
+  reg:
+    maxItems: 1
+    description: base I2C address of the device
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+  dvdd12-supply:
+    maxItems: 1
+    description: Regulator for 1.2V digital core power.
+
+  dvdd25-supply:
+    maxItems: 1
+    description: Regulator for 2.5V digital core power.
+
+  ports:
+    anyOf:
+      - port@0:
+        description: Video port for LVTTL input
+      - port@1:
+        description: Video port for eDP output (panel or connector).
+                     May be omitted if EDID works reliably.
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - dvdd12-supply
+  - dvdd25-supply
+  - ports
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      anx6345: anx6345@38 {
+        compatible = "analogix,anx6345";
+        reg = <0x38>;
+        reset-gpios = <&pio42 1 /* GPIO_ACTIVE_LOW */>;
+        dvdd25-supply = <&reg_dldo2>;
+        dvdd12-supply = <&reg_fldo1>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          anx6345_in: port@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            anx6345_in_tcon0: endpoint@0 {
+              reg = <0>;
+              remote-endpoint = <&tcon0_out_anx6345>;
+            };
+          };
+
+          anx6345_out: port@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            anx6345_out_panel: endpoint@0 {
+              reg = <0>;
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+      };
+    };