diff mbox series

[next,V2] drivers: thermal: tsens: fix potential integer overflow on multiply

Message ID 20191101100035.25502-1-colin.king@canonical.com (mailing list archive)
State New, archived
Delegated to: Eduardo Valentin
Headers show
Series [next,V2] drivers: thermal: tsens: fix potential integer overflow on multiply | expand

Commit Message

Colin King Nov. 1, 2019, 10 a.m. UTC
From: Colin Ian King <colin.king@canonical.com>

Currently a multiply operation is being performed on two int values
and the result is being assigned to a u64, presumably because the
end result is expected to be probably larger than an int. However,
because the multiply is an int multiply one can get overflow. Avoid
the overflow by casting degc to a u64 to force a u64 multiply.

Also use div_u64 for the divide as suggested by Daniel Lezcano.

Addresses-Coverity: ("Unintentional integer overflow")
Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---

V2: use div_u64 for the divide as suggested by Daniel Lezcano.

---
 drivers/thermal/qcom/tsens-common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Amit Kucheria Nov. 4, 2019, 6:15 a.m. UTC | #1
On Fri, Nov 1, 2019 at 3:30 PM Colin King <colin.king@canonical.com> wrote:
>
> From: Colin Ian King <colin.king@canonical.com>
>
> Currently a multiply operation is being performed on two int values
> and the result is being assigned to a u64, presumably because the
> end result is expected to be probably larger than an int. However,
> because the multiply is an int multiply one can get overflow. Avoid
> the overflow by casting degc to a u64 to force a u64 multiply.
>
> Also use div_u64 for the divide as suggested by Daniel Lezcano.
>
> Addresses-Coverity: ("Unintentional integer overflow")
> Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>

> ---
>
> V2: use div_u64 for the divide as suggested by Daniel Lezcano.
>
> ---
>  drivers/thermal/qcom/tsens-common.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index 03bf1b8133ea..c6b551ec7323 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -92,7 +92,7 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
>
>  static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
>  {
> -       u64 code = (degc * s->slope + s->offset) / SLOPE_FACTOR;
> +       u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
>
>         pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
>         return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);
> --
> 2.20.1
>
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 03bf1b8133ea..c6b551ec7323 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -92,7 +92,7 @@  void compute_intercept_slope(struct tsens_priv *priv, u32 *p1,
 
 static inline u32 degc_to_code(int degc, const struct tsens_sensor *s)
 {
-	u64 code = (degc * s->slope + s->offset) / SLOPE_FACTOR;
+	u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR);
 
 	pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc);
 	return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE);