[v5,2/7] drm/bridge: split some definitions of ANX78xx to dedicated headers
diff mbox series

Message ID 20191104110605.F012268BFE@verein.lst.de
State New
Headers show
Series
  • Add anx6345 DP/eDP bridge for Olimex Teres-I
Related show

Commit Message

Torsten Duwe Oct. 29, 2019, 12:16 p.m. UTC
From: Icenowy Zheng <icenowy@aosc.io>

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h | 465 +--------------------
 .../gpu/drm/bridge/analogix/analogix-i2c-dptx.h    | 247 +++++++++++
 .../drm/bridge/analogix/analogix-i2c-txcommon.h    | 233 +++++++++++
 3 files changed, 485 insertions(+), 460 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
 create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h

Comments

Maxime Ripard Nov. 5, 2019, 10:41 a.m. UTC | #1
Hi,

On Tue, Oct 29, 2019 at 01:16:57PM +0100, Torsten Duwe wrote:
> From: Icenowy Zheng <icenowy@aosc.io>
>
> Some definitions currently in analogix-anx78xx.h are not restricted to
> the ANX78xx series, but also applicable to other DisplayPort
> transmitters by Analogix.
>
> Split out them to dedicated headers, and make analogix-anx78xx.h include
> them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Signed-off-by: Torsten Duwe <duwe@suse.de>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

This one doesn't apply on drm-misc-next. The fix doesn't look really
obvious to me, can you rebase and resend it?

I'll apply the DT bindings and the DT tree so that it's part of the
next PR I'm going to send.

Maxime
Torsten Duwe Nov. 5, 2019, 5:33 p.m. UTC | #2
From: Icenowy Zheng <icenowy@aosc.io>

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

---

On Tue, Nov 05, 2019 at 11:41:26AM +0100, Maxime Ripard wrote:
> 
> This one doesn't apply on drm-misc-next. The fix doesn't look really
> obvious to me, can you rebase and resend it?

Sure.
The set was based on 5.4-rc5, which lacks 025910db8057f from drm-misc-next
You'll also have to 
diff -r anx6345-v5/v5-0005-drm-bridge-Add-Analogix-anx6345-support.patch anx6345-v5a/v5-0005-drm-bridge-Add-Analogix-anx6345-support.patch
116,117c116,117
< +     [I2C_IDX_DPTX]  = ANALOGIX_I2C_DPTX,
< +     [I2C_IDX_TXCOM] = ANALOGIX_I2C_TXCOMMON,
---
> +     [I2C_IDX_DPTX]  = 0x70,
> +     [I2C_IDX_TXCOM] = 0x72,

To make it compile, with the changed coding style of 025910db8057f.
Can you change that on the fly in 5/7 or shall I resend that, too?

	Torsten

---
 drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h | 461 +--------------------
 .../gpu/drm/bridge/analogix/analogix-i2c-dptx.h    | 247 +++++++++++
 .../drm/bridge/analogix/analogix-i2c-txcommon.h    | 233 +++++++++++
 3 files changed, 483 insertions(+), 458 deletions(-)

--- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
@@ -6,6 +6,9 @@
 #ifndef __ANX78xx_H
 #define __ANX78xx_H
 
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
 /***************************************************************/
 /* Register definitions for RX_PO                              */
 /***************************************************************/
@@ -210,463 +213,6 @@
 #define SP_SET_AVMUTE			BIT(0)
 
 /***************************************************************/
-/* Register definitions for TX_P0                              */
-/***************************************************************/
-
-/* HDCP Status Register */
-#define SP_TX_HDCP_STATUS_REG		0x00
-#define SP_AUTH_FAIL			BIT(5)
-#define SP_AUTHEN_PASS			BIT(1)
-
-/* HDCP Control Register 0 */
-#define SP_HDCP_CTRL0_REG		0x01
-#define SP_RX_REPEATER			BIT(6)
-#define SP_RE_AUTH			BIT(5)
-#define SP_SW_AUTH_OK			BIT(4)
-#define SP_HARD_AUTH_EN			BIT(3)
-#define SP_HDCP_ENC_EN			BIT(2)
-#define SP_BKSV_SRM_PASS		BIT(1)
-#define SP_KSVLIST_VLD			BIT(0)
-/* HDCP Function Enabled */
-#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-/* HDCP Receiver BSTATUS Register 0 */
-#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
-/* HDCP Receiver BSTATUS Register 1 */
-#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
-
-/* HDCP Embedded "Blue Screen" Content Registers */
-#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
-#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
-#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
-
-/* HDCP Wait R0 Timing Register */
-#define SP_HDCP_WAIT_R0_TIME_REG	0x40
-
-/* HDCP Link Integrity Check Timer Register */
-#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
-
-/* HDCP Repeater Ready Wait Timer Register */
-#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
-
-/* HDCP Auto Timer Register */
-#define SP_HDCP_AUTO_TIMER_REG		0x51
-
-/* HDCP Key Status Register */
-#define SP_HDCP_KEY_STATUS_REG		0x5e
-
-/* HDCP Key Command Register */
-#define SP_HDCP_KEY_COMMAND_REG		0x5f
-#define SP_DISABLE_SYNC_HDCP		BIT(2)
-
-/* OTP Memory Key Protection Registers */
-#define SP_OTP_KEY_PROTECT1_REG		0x60
-#define SP_OTP_KEY_PROTECT2_REG		0x61
-#define SP_OTP_KEY_PROTECT3_REG		0x62
-#define SP_OTP_PSW1			0xa2
-#define SP_OTP_PSW2			0x7e
-#define SP_OTP_PSW3			0xc6
-
-/* DP System Control Registers */
-#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
-/* Bits for DP System Control Register 2 */
-#define SP_CHA_STA			BIT(2)
-/* Bits for DP System Control Register 3 */
-#define SP_HPD_STATUS			BIT(6)
-#define SP_STRM_VALID			BIT(2)
-/* Bits for DP System Control Register 4 */
-#define SP_ENHANCED_MODE		BIT(3)
-
-/* DP Video Control Register */
-#define SP_DP_VIDEO_CTRL_REG		0x84
-#define SP_COLOR_F_MASK			0x06
-#define SP_COLOR_F_SHIFT		1
-#define SP_BPC_MASK			0xe0
-#define SP_BPC_SHIFT			5
-#  define SP_BPC_6BITS			0x00
-#  define SP_BPC_8BITS			0x01
-#  define SP_BPC_10BITS			0x02
-#  define SP_BPC_12BITS			0x03
-
-/* DP Audio Control Register */
-#define SP_DP_AUDIO_CTRL_REG		0x87
-#define SP_AUD_EN			BIT(0)
-
-/* 10us Pulse Generate Timer Registers */
-#define SP_I2C_GEN_10US_TIMER0_REG	0x88
-#define SP_I2C_GEN_10US_TIMER1_REG	0x89
-
-/* Packet Send Control Register */
-#define SP_PACKET_SEND_CTRL_REG		0x90
-#define SP_AUD_IF_UP			BIT(7)
-#define SP_AVI_IF_UD			BIT(6)
-#define SP_MPEG_IF_UD			BIT(5)
-#define SP_SPD_IF_UD			BIT(4)
-#define SP_AUD_IF_EN			BIT(3)
-#define SP_AVI_IF_EN			BIT(2)
-#define SP_MPEG_IF_EN			BIT(1)
-#define SP_SPD_IF_EN			BIT(0)
-
-/* DP HDCP Control Register */
-#define SP_DP_HDCP_CTRL_REG		0x92
-#define SP_AUTO_EN			BIT(7)
-#define SP_AUTO_START			BIT(5)
-#define SP_LINK_POLLING			BIT(1)
-
-/* DP Main Link Bandwidth Setting Register */
-#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
-#define SP_LINK_BW_SET_MASK		0x1f
-#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
-
-/* DP Training Pattern Set Register */
-#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
-
-/* DP Lane 0 Link Training Control Register */
-#define SP_DP_LANE0_LT_CTRL_REG		0xa3
-#define SP_TX_SW_SET_MASK		0x1b
-#define SP_MAX_PRE_REACH		BIT(5)
-#define SP_MAX_DRIVE_REACH		BIT(4)
-#define SP_PRE_EMP_LEVEL1		BIT(3)
-#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
-
-/* DP Link Training Control Register */
-#define SP_DP_LT_CTRL_REG		0xa8
-#define SP_LT_ERROR_TYPE_MASK		0x70
-#  define SP_LT_NO_ERROR		0x00
-#  define SP_LT_AUX_WRITE_ERROR		0x01
-#  define SP_LT_MAX_DRIVE_REACHED	0x02
-#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
-#  define SP_LT_LOOP_SAME_5_TIME	0x04
-#  define SP_LT_CR_FAIL_IN_EQ		0x05
-#  define SP_LT_EQ_LOOP_5_TIME		0x06
-#define SP_LT_EN			BIT(0)
-
-/* DP CEP Training Control Registers */
-#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
-#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
-
-/* DP Debug Register 1 */
-#define SP_DP_DEBUG1_REG		0xb0
-#define SP_DEBUG_PLL_LOCK		BIT(4)
-#define SP_POLLING_EN			BIT(1)
-
-/* DP Polling Control Register */
-#define SP_DP_POLLING_CTRL_REG		0xb4
-#define SP_AUTO_POLLING_DISABLE		BIT(0)
-
-/* DP Link Debug Control Register */
-#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
-#define SP_M_VID_DEBUG			BIT(5)
-#define SP_NEW_PRBS7			BIT(4)
-#define SP_INSERT_ER			BIT(1)
-#define SP_PRBS31_EN			BIT(0)
-
-/* AUX Misc control Register */
-#define SP_AUX_MISC_CTRL_REG		0xbf
-
-/* DP PLL control Register */
-#define SP_DP_PLL_CTRL_REG		0xc7
-#define SP_PLL_RST			BIT(6)
-
-/* DP Analog Power Down Register */
-#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
-#define SP_CH0_PD			BIT(0)
-
-/* DP Misc Control Register */
-#define SP_DP_MISC_CTRL_REG		0xcd
-#define SP_EQ_TRAINING_LOOP		BIT(6)
-
-/* DP Extra I2C Device Address Register */
-#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
-#define SP_I2C_STRETCH_DISABLE		BIT(7)
-
-#define SP_I2C_EXTRA_ADDR		0x50
-
-/* DP Downspread Control Register 1 */
-#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
-
-/* DP M Value Calculation Control Register */
-#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
-#define SP_M_GEN_CLK_SEL		BIT(0)
-
-/* AUX Channel Access Status Register */
-#define SP_AUX_CH_STATUS_REG		0xe0
-#define SP_AUX_STATUS			0x0f
-
-/* AUX Channel DEFER Control Register */
-#define SP_AUX_DEFER_CTRL_REG		0xe2
-#define SP_DEFER_CTRL_EN		BIT(7)
-
-/* DP Buffer Data Count Register */
-#define SP_BUF_DATA_COUNT_REG		0xe4
-#define SP_BUF_DATA_COUNT_MASK		0x1f
-#define SP_BUF_CLR			BIT(7)
-
-/* DP AUX Channel Control Register 1 */
-#define SP_DP_AUX_CH_CTRL1_REG		0xe5
-#define SP_AUX_TX_COMM_MASK		0x0f
-#define SP_AUX_LENGTH_MASK		0xf0
-#define SP_AUX_LENGTH_SHIFT		4
-
-/* DP AUX CH Address Register 0 */
-#define SP_AUX_ADDR_7_0_REG		0xe6
-
-/* DP AUX CH Address Register 1 */
-#define SP_AUX_ADDR_15_8_REG		0xe7
-
-/* DP AUX CH Address Register 2 */
-#define SP_AUX_ADDR_19_16_REG		0xe8
-#define SP_AUX_ADDR_19_16_MASK		0x0f
-
-/* DP AUX Channel Control Register 2 */
-#define SP_DP_AUX_CH_CTRL2_REG		0xe9
-#define SP_AUX_SEL_RXCM			BIT(6)
-#define SP_AUX_CHSEL			BIT(3)
-#define SP_AUX_PN_INV			BIT(2)
-#define SP_ADDR_ONLY			BIT(1)
-#define SP_AUX_EN			BIT(0)
-
-/* DP Video Stream Control InfoFrame Register */
-#define SP_DP_3D_VSC_CTRL_REG		0xea
-#define SP_INFO_FRAME_VSC_EN		BIT(0)
-
-/* DP Video Stream Data Byte 1 Register */
-#define SP_DP_VSC_DB1_REG		0xeb
-
-/* DP AUX Channel Control Register 3 */
-#define SP_DP_AUX_CH_CTRL3_REG		0xec
-#define SP_WAIT_COUNTER_7_0_MASK	0xff
-
-/* DP AUX Channel Control Register 4 */
-#define SP_DP_AUX_CH_CTRL4_REG		0xed
-
-/* DP AUX Buffer Data Registers */
-#define SP_DP_BUF_DATA0_REG		0xf0
-
-/***************************************************************/
-/* Register definitions for TX_P2                              */
-/***************************************************************/
-
-/*
- * Core Register Definitions
- */
-
-/* Device ID Low Byte Register */
-#define SP_DEVICE_IDL_REG		0x02
-
-/* Device ID High Byte Register */
-#define SP_DEVICE_IDH_REG		0x03
-
-/* Device version register */
-#define SP_DEVICE_VERSION_REG		0x04
-
-/* Power Down Control Register */
-#define SP_POWERDOWN_CTRL_REG		0x05
-#define SP_REGISTER_PD			BIT(7)
-#define SP_HDCP_PD			BIT(5)
-#define SP_AUDIO_PD			BIT(4)
-#define SP_VIDEO_PD			BIT(3)
-#define SP_LINK_PD			BIT(2)
-#define SP_TOTAL_PD			BIT(1)
-
-/* Reset Control Register 1 */
-#define SP_RESET_CTRL1_REG		0x06
-#define SP_MISC_RST			BIT(7)
-#define SP_VIDCAP_RST			BIT(6)
-#define SP_VIDFIF_RST			BIT(5)
-#define SP_AUDFIF_RST			BIT(4)
-#define SP_AUDCAP_RST			BIT(3)
-#define SP_HDCP_RST			BIT(2)
-#define SP_SW_RST			BIT(1)
-#define SP_HW_RST			BIT(0)
-
-/* Reset Control Register 2 */
-#define SP_RESET_CTRL2_REG		0x07
-#define SP_AUX_RST			BIT(2)
-#define SP_SERDES_FIFO_RST		BIT(1)
-#define SP_I2C_REG_RST			BIT(0)
-
-/* Video Control Register 1 */
-#define SP_VID_CTRL1_REG		0x08
-#define SP_VIDEO_EN			BIT(7)
-#define SP_VIDEO_MUTE			BIT(2)
-#define SP_DE_GEN			BIT(1)
-#define SP_DEMUX			BIT(0)
-
-/* Video Control Register 2 */
-#define SP_VID_CTRL2_REG		0x09
-#define SP_IN_COLOR_F_MASK		0x03
-#define SP_IN_YC_BIT_SEL		BIT(2)
-#define SP_IN_BPC_MASK			0x70
-#define SP_IN_BPC_SHIFT			4
-#  define SP_IN_BPC_12BIT		0x03
-#  define SP_IN_BPC_10BIT		0x02
-#  define SP_IN_BPC_8BIT		0x01
-#  define SP_IN_BPC_6BIT		0x00
-#define SP_IN_D_RANGE			BIT(7)
-
-/* Video Control Register 3 */
-#define SP_VID_CTRL3_REG		0x0a
-#define SP_HPD_OUT			BIT(6)
-
-/* Video Control Register 5 */
-#define SP_VID_CTRL5_REG		0x0c
-#define SP_CSC_STD_SEL			BIT(7)
-#define SP_XVYCC_RNG_LMT		BIT(6)
-#define SP_RANGE_Y2R			BIT(5)
-#define SP_CSPACE_Y2R			BIT(4)
-#define SP_RGB_RNG_LMT			BIT(3)
-#define SP_Y_RNG_LMT			BIT(2)
-#define SP_RANGE_R2Y			BIT(1)
-#define SP_CSPACE_R2Y			BIT(0)
-
-/* Video Control Register 6 */
-#define SP_VID_CTRL6_REG		0x0d
-#define SP_TEST_PATTERN_EN		BIT(7)
-#define SP_VIDEO_PROCESS_EN		BIT(6)
-#define SP_VID_US_MODE			BIT(3)
-#define SP_VID_DS_MODE			BIT(2)
-#define SP_UP_SAMPLE			BIT(1)
-#define SP_DOWN_SAMPLE			BIT(0)
-
-/* Video Control Register 8 */
-#define SP_VID_CTRL8_REG		0x0f
-#define SP_VID_VRES_TH			BIT(0)
-
-/* Total Line Status Low Byte Register */
-#define SP_TOTAL_LINE_STAL_REG		0x24
-
-/* Total Line Status High Byte Register */
-#define SP_TOTAL_LINE_STAH_REG		0x25
-
-/* Active Line Status Low Byte Register */
-#define SP_ACT_LINE_STAL_REG		0x26
-
-/* Active Line Status High Byte Register */
-#define SP_ACT_LINE_STAH_REG		0x27
-
-/* Vertical Front Porch Status Register */
-#define SP_V_F_PORCH_STA_REG		0x28
-
-/* Vertical SYNC Width Status Register */
-#define SP_V_SYNC_STA_REG		0x29
-
-/* Vertical Back Porch Status Register */
-#define SP_V_B_PORCH_STA_REG		0x2a
-
-/* Total Pixel Status Low Byte Register */
-#define SP_TOTAL_PIXEL_STAL_REG		0x2b
-
-/* Total Pixel Status High Byte Register */
-#define SP_TOTAL_PIXEL_STAH_REG		0x2c
-
-/* Active Pixel Status Low Byte Register */
-#define SP_ACT_PIXEL_STAL_REG		0x2d
-
-/* Active Pixel Status High Byte Register */
-#define SP_ACT_PIXEL_STAH_REG		0x2e
-
-/* Horizontal Front Porch Status Low Byte Register */
-#define SP_H_F_PORCH_STAL_REG		0x2f
-
-/* Horizontal Front Porch Statys High Byte Register */
-#define SP_H_F_PORCH_STAH_REG		0x30
-
-/* Horizontal SYNC Width Status Low Byte Register */
-#define SP_H_SYNC_STAL_REG		0x31
-
-/* Horizontal SYNC Width Status High Byte Register */
-#define SP_H_SYNC_STAH_REG		0x32
-
-/* Horizontal Back Porch Status Low Byte Register */
-#define SP_H_B_PORCH_STAL_REG		0x33
-
-/* Horizontal Back Porch Status High Byte Register */
-#define SP_H_B_PORCH_STAH_REG		0x34
-
-/* InfoFrame AVI Packet DB1 Register */
-#define SP_INFOFRAME_AVI_DB1_REG	0x70
-
-/* Bit Control Specific Register */
-#define SP_BIT_CTRL_SPECIFIC_REG	0x80
-#define SP_BIT_CTRL_SELECT_SHIFT	1
-#define SP_ENABLE_BIT_CTRL		BIT(0)
-
-/* InfoFrame Audio Packet DB1 Register */
-#define SP_INFOFRAME_AUD_DB1_REG	0x83
-
-/* InfoFrame MPEG Packet DB1 Register */
-#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
-
-/* Audio Channel Status Registers */
-#define SP_AUD_CH_STATUS_BASE		0xd0
-
-/* Audio Channel Num Register 5 */
-#define SP_I2S_CHANNEL_NUM_MASK		0xe0
-#  define SP_I2S_CH_NUM_1		(0x00 << 5)
-#  define SP_I2S_CH_NUM_2		(0x01 << 5)
-#  define SP_I2S_CH_NUM_3		(0x02 << 5)
-#  define SP_I2S_CH_NUM_4		(0x03 << 5)
-#  define SP_I2S_CH_NUM_5		(0x04 << 5)
-#  define SP_I2S_CH_NUM_6		(0x05 << 5)
-#  define SP_I2S_CH_NUM_7		(0x06 << 5)
-#  define SP_I2S_CH_NUM_8		(0x07 << 5)
-#define SP_EXT_VUCP			BIT(2)
-#define SP_VBIT				BIT(1)
-#define SP_AUDIO_LAYOUT			BIT(0)
-
-/* Analog Debug Register 2 */
-#define SP_ANALOG_DEBUG2_REG		0xdd
-#define SP_FORCE_SW_OFF_BYPASS		0x20
-#define SP_XTAL_FRQ			0x1c
-#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
-#  define SP_XTAL_FRQ_24M		(0x01 << 2)
-#  define SP_XTAL_FRQ_25M		(0x02 << 2)
-#  define SP_XTAL_FRQ_26M		(0x03 << 2)
-#  define SP_XTAL_FRQ_27M		(0x04 << 2)
-#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
-#  define SP_XTAL_FRQ_52M		(0x06 << 2)
-#define SP_POWERON_TIME_1P5MS		0x03
-
-/* Analog Control 0 Register */
-#define SP_ANALOG_CTRL0_REG		0xe1
-
-/* Common Interrupt Status Register 1 */
-#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
-#define SP_PLL_LOCK_CHG			0x40
-
-/* Common Interrupt Status Register 2 */
-#define SP_COMMON_INT_STATUS2		0xf2
-#define SP_HDCP_AUTH_CHG		BIT(1)
-#define SP_HDCP_AUTH_DONE		BIT(0)
-
-#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
-
-/* Common Interrupt Status Register 4 */
-#define SP_COMMON_INT_STATUS4_REG	0xf4
-#define SP_HPD_IRQ			BIT(6)
-#define SP_HPD_ESYNC_ERR		BIT(4)
-#define SP_HPD_CHG			BIT(2)
-#define SP_HPD_LOST			BIT(1)
-#define SP_HPD_PLUG			BIT(0)
-
-/* DP Interrupt Status Register */
-#define SP_DP_INT_STATUS1_REG		0xf7
-#define SP_TRAINING_FINISH		BIT(5)
-#define SP_POLLING_ERR			BIT(4)
-
-/* Common Interrupt Mask Register */
-#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
-
-#define SP_COMMON_INT_MASK4_REG		0xfb
-
-/* DP Interrupts Mask Register */
-#define SP_DP_INT_MASK1_REG		0xfe
-
-/* Interrupt Control Register */
-#define SP_INT_CTRL_REG			0xff
-
-/***************************************************************/
 /* Register definitions for TX_P1                              */
 /***************************************************************/
 
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -0,0 +1,245 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#ifndef _ANALOGIX_I2C_DPTX_H_
+#define _ANALOGIX_I2C_DPTX_H_
+
+/***************************************************************/
+/* Register definitions for TX_P0                              */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_STRM_VALID			BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+#endif
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -0,0 +1,231 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+#ifndef _ANALOGIX_I2C_TXCOMMON_H_
+#define _ANALOGIX_I2C_TXCOMMON_H_
+
+/***************************************************************/
+/* Register definitions for TX_P2                              */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */
Maxime Ripard Nov. 6, 2019, 3:21 p.m. UTC | #3
Hi

On Tue, Nov 05, 2019 at 06:33:32PM +0100, Torsten Duwe wrote:
> From: Icenowy Zheng <icenowy@aosc.io>
>
> Some definitions currently in analogix-anx78xx.h are not restricted to
> the ANX78xx series, but also applicable to other DisplayPort
> transmitters by Analogix.
>
> Split out them to dedicated headers, and make analogix-anx78xx.h include
> them.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
> Signed-off-by: Torsten Duwe <duwe@suse.de>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
>
> ---
>
> On Tue, Nov 05, 2019 at 11:41:26AM +0100, Maxime Ripard wrote:
> >
> > This one doesn't apply on drm-misc-next. The fix doesn't look really
> > obvious to me, can you rebase and resend it?
>
> Sure.
> The set was based on 5.4-rc5, which lacks 025910db8057f from drm-misc-next
> You'll also have to
> diff -r anx6345-v5/v5-0005-drm-bridge-Add-Analogix-anx6345-support.patch anx6345-v5a/v5-0005-drm-bridge-Add-Analogix-anx6345-support.patch
> 116,117c116,117
> < +     [I2C_IDX_DPTX]  = ANALOGIX_I2C_DPTX,
> < +     [I2C_IDX_TXCOM] = ANALOGIX_I2C_TXCOMMON,
> ---
> > +     [I2C_IDX_DPTX]  = 0x70,
> > +     [I2C_IDX_TXCOM] = 0x72,
>
> To make it compile, with the changed coding style of 025910db8057f.
> Can you change that on the fly in 5/7 or shall I resend that, too?

Please resend the whole series rebased on top of either linux-next or
drm-misc-next.

Maxime

Patch
diff mbox series

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
index 25e063bcecbc..be68afc955c9 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
@@ -2,13 +2,15 @@ 
 /*
  * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
  */
-
 #ifndef __ANX78xx_H
 #define __ANX78xx_H
 
-#define TX_P0				0x70
+#include "analogix-i2c-dptx.h"
+#include "analogix-i2c-txcommon.h"
+
+#define TX_P0				ANALOGIX_I2C_DPTX
 #define TX_P1				0x7a
-#define TX_P2				0x72
+#define TX_P2				ANALOGIX_I2C_TXCOMMON
 
 #define RX_P0				0x7e
 #define RX_P1				0x80
@@ -216,463 +218,6 @@ 
 #define SP_CLEAR_AVMUTE			BIT(4)
 #define SP_SET_AVMUTE			BIT(0)
 
-/***************************************************************/
-/* Register definition of device address 0x70                  */
-/***************************************************************/
-
-/* HDCP Status Register */
-#define SP_TX_HDCP_STATUS_REG		0x00
-#define SP_AUTH_FAIL			BIT(5)
-#define SP_AUTHEN_PASS			BIT(1)
-
-/* HDCP Control Register 0 */
-#define SP_HDCP_CTRL0_REG		0x01
-#define SP_RX_REPEATER			BIT(6)
-#define SP_RE_AUTH			BIT(5)
-#define SP_SW_AUTH_OK			BIT(4)
-#define SP_HARD_AUTH_EN			BIT(3)
-#define SP_HDCP_ENC_EN			BIT(2)
-#define SP_BKSV_SRM_PASS		BIT(1)
-#define SP_KSVLIST_VLD			BIT(0)
-/* HDCP Function Enabled */
-#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-/* HDCP Receiver BSTATUS Register 0 */
-#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
-/* HDCP Receiver BSTATUS Register 1 */
-#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
-
-/* HDCP Embedded "Blue Screen" Content Registers */
-#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
-#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
-#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
-
-/* HDCP Wait R0 Timing Register */
-#define SP_HDCP_WAIT_R0_TIME_REG	0x40
-
-/* HDCP Link Integrity Check Timer Register */
-#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
-
-/* HDCP Repeater Ready Wait Timer Register */
-#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
-
-/* HDCP Auto Timer Register */
-#define SP_HDCP_AUTO_TIMER_REG		0x51
-
-/* HDCP Key Status Register */
-#define SP_HDCP_KEY_STATUS_REG		0x5e
-
-/* HDCP Key Command Register */
-#define SP_HDCP_KEY_COMMAND_REG		0x5f
-#define SP_DISABLE_SYNC_HDCP		BIT(2)
-
-/* OTP Memory Key Protection Registers */
-#define SP_OTP_KEY_PROTECT1_REG		0x60
-#define SP_OTP_KEY_PROTECT2_REG		0x61
-#define SP_OTP_KEY_PROTECT3_REG		0x62
-#define SP_OTP_PSW1			0xa2
-#define SP_OTP_PSW2			0x7e
-#define SP_OTP_PSW3			0xc6
-
-/* DP System Control Registers */
-#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
-/* Bits for DP System Control Register 2 */
-#define SP_CHA_STA			BIT(2)
-/* Bits for DP System Control Register 3 */
-#define SP_HPD_STATUS			BIT(6)
-#define SP_STRM_VALID			BIT(2)
-/* Bits for DP System Control Register 4 */
-#define SP_ENHANCED_MODE		BIT(3)
-
-/* DP Video Control Register */
-#define SP_DP_VIDEO_CTRL_REG		0x84
-#define SP_COLOR_F_MASK			0x06
-#define SP_COLOR_F_SHIFT		1
-#define SP_BPC_MASK			0xe0
-#define SP_BPC_SHIFT			5
-#  define SP_BPC_6BITS			0x00
-#  define SP_BPC_8BITS			0x01
-#  define SP_BPC_10BITS			0x02
-#  define SP_BPC_12BITS			0x03
-
-/* DP Audio Control Register */
-#define SP_DP_AUDIO_CTRL_REG		0x87
-#define SP_AUD_EN			BIT(0)
-
-/* 10us Pulse Generate Timer Registers */
-#define SP_I2C_GEN_10US_TIMER0_REG	0x88
-#define SP_I2C_GEN_10US_TIMER1_REG	0x89
-
-/* Packet Send Control Register */
-#define SP_PACKET_SEND_CTRL_REG		0x90
-#define SP_AUD_IF_UP			BIT(7)
-#define SP_AVI_IF_UD			BIT(6)
-#define SP_MPEG_IF_UD			BIT(5)
-#define SP_SPD_IF_UD			BIT(4)
-#define SP_AUD_IF_EN			BIT(3)
-#define SP_AVI_IF_EN			BIT(2)
-#define SP_MPEG_IF_EN			BIT(1)
-#define SP_SPD_IF_EN			BIT(0)
-
-/* DP HDCP Control Register */
-#define SP_DP_HDCP_CTRL_REG		0x92
-#define SP_AUTO_EN			BIT(7)
-#define SP_AUTO_START			BIT(5)
-#define SP_LINK_POLLING			BIT(1)
-
-/* DP Main Link Bandwidth Setting Register */
-#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
-#define SP_LINK_BW_SET_MASK		0x1f
-#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
-
-/* DP Training Pattern Set Register */
-#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
-
-/* DP Lane 0 Link Training Control Register */
-#define SP_DP_LANE0_LT_CTRL_REG		0xa3
-#define SP_TX_SW_SET_MASK		0x1b
-#define SP_MAX_PRE_REACH		BIT(5)
-#define SP_MAX_DRIVE_REACH		BIT(4)
-#define SP_PRE_EMP_LEVEL1		BIT(3)
-#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
-
-/* DP Link Training Control Register */
-#define SP_DP_LT_CTRL_REG		0xa8
-#define SP_LT_ERROR_TYPE_MASK		0x70
-#  define SP_LT_NO_ERROR		0x00
-#  define SP_LT_AUX_WRITE_ERROR		0x01
-#  define SP_LT_MAX_DRIVE_REACHED	0x02
-#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
-#  define SP_LT_LOOP_SAME_5_TIME	0x04
-#  define SP_LT_CR_FAIL_IN_EQ		0x05
-#  define SP_LT_EQ_LOOP_5_TIME		0x06
-#define SP_LT_EN			BIT(0)
-
-/* DP CEP Training Control Registers */
-#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
-#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
-
-/* DP Debug Register 1 */
-#define SP_DP_DEBUG1_REG		0xb0
-#define SP_DEBUG_PLL_LOCK		BIT(4)
-#define SP_POLLING_EN			BIT(1)
-
-/* DP Polling Control Register */
-#define SP_DP_POLLING_CTRL_REG		0xb4
-#define SP_AUTO_POLLING_DISABLE		BIT(0)
-
-/* DP Link Debug Control Register */
-#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
-#define SP_M_VID_DEBUG			BIT(5)
-#define SP_NEW_PRBS7			BIT(4)
-#define SP_INSERT_ER			BIT(1)
-#define SP_PRBS31_EN			BIT(0)
-
-/* AUX Misc control Register */
-#define SP_AUX_MISC_CTRL_REG		0xbf
-
-/* DP PLL control Register */
-#define SP_DP_PLL_CTRL_REG		0xc7
-#define SP_PLL_RST			BIT(6)
-
-/* DP Analog Power Down Register */
-#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
-#define SP_CH0_PD			BIT(0)
-
-/* DP Misc Control Register */
-#define SP_DP_MISC_CTRL_REG		0xcd
-#define SP_EQ_TRAINING_LOOP		BIT(6)
-
-/* DP Extra I2C Device Address Register */
-#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
-#define SP_I2C_STRETCH_DISABLE		BIT(7)
-
-#define SP_I2C_EXTRA_ADDR		0x50
-
-/* DP Downspread Control Register 1 */
-#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
-
-/* DP M Value Calculation Control Register */
-#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
-#define SP_M_GEN_CLK_SEL		BIT(0)
-
-/* AUX Channel Access Status Register */
-#define SP_AUX_CH_STATUS_REG		0xe0
-#define SP_AUX_STATUS			0x0f
-
-/* AUX Channel DEFER Control Register */
-#define SP_AUX_DEFER_CTRL_REG		0xe2
-#define SP_DEFER_CTRL_EN		BIT(7)
-
-/* DP Buffer Data Count Register */
-#define SP_BUF_DATA_COUNT_REG		0xe4
-#define SP_BUF_DATA_COUNT_MASK		0x1f
-#define SP_BUF_CLR			BIT(7)
-
-/* DP AUX Channel Control Register 1 */
-#define SP_DP_AUX_CH_CTRL1_REG		0xe5
-#define SP_AUX_TX_COMM_MASK		0x0f
-#define SP_AUX_LENGTH_MASK		0xf0
-#define SP_AUX_LENGTH_SHIFT		4
-
-/* DP AUX CH Address Register 0 */
-#define SP_AUX_ADDR_7_0_REG		0xe6
-
-/* DP AUX CH Address Register 1 */
-#define SP_AUX_ADDR_15_8_REG		0xe7
-
-/* DP AUX CH Address Register 2 */
-#define SP_AUX_ADDR_19_16_REG		0xe8
-#define SP_AUX_ADDR_19_16_MASK		0x0f
-
-/* DP AUX Channel Control Register 2 */
-#define SP_DP_AUX_CH_CTRL2_REG		0xe9
-#define SP_AUX_SEL_RXCM			BIT(6)
-#define SP_AUX_CHSEL			BIT(3)
-#define SP_AUX_PN_INV			BIT(2)
-#define SP_ADDR_ONLY			BIT(1)
-#define SP_AUX_EN			BIT(0)
-
-/* DP Video Stream Control InfoFrame Register */
-#define SP_DP_3D_VSC_CTRL_REG		0xea
-#define SP_INFO_FRAME_VSC_EN		BIT(0)
-
-/* DP Video Stream Data Byte 1 Register */
-#define SP_DP_VSC_DB1_REG		0xeb
-
-/* DP AUX Channel Control Register 3 */
-#define SP_DP_AUX_CH_CTRL3_REG		0xec
-#define SP_WAIT_COUNTER_7_0_MASK	0xff
-
-/* DP AUX Channel Control Register 4 */
-#define SP_DP_AUX_CH_CTRL4_REG		0xed
-
-/* DP AUX Buffer Data Registers */
-#define SP_DP_BUF_DATA0_REG		0xf0
-
-/***************************************************************/
-/* Register definition of device address 0x72                  */
-/***************************************************************/
-
-/*
- * Core Register Definitions
- */
-
-/* Device ID Low Byte Register */
-#define SP_DEVICE_IDL_REG		0x02
-
-/* Device ID High Byte Register */
-#define SP_DEVICE_IDH_REG		0x03
-
-/* Device version register */
-#define SP_DEVICE_VERSION_REG		0x04
-
-/* Power Down Control Register */
-#define SP_POWERDOWN_CTRL_REG		0x05
-#define SP_REGISTER_PD			BIT(7)
-#define SP_HDCP_PD			BIT(5)
-#define SP_AUDIO_PD			BIT(4)
-#define SP_VIDEO_PD			BIT(3)
-#define SP_LINK_PD			BIT(2)
-#define SP_TOTAL_PD			BIT(1)
-
-/* Reset Control Register 1 */
-#define SP_RESET_CTRL1_REG		0x06
-#define SP_MISC_RST			BIT(7)
-#define SP_VIDCAP_RST			BIT(6)
-#define SP_VIDFIF_RST			BIT(5)
-#define SP_AUDFIF_RST			BIT(4)
-#define SP_AUDCAP_RST			BIT(3)
-#define SP_HDCP_RST			BIT(2)
-#define SP_SW_RST			BIT(1)
-#define SP_HW_RST			BIT(0)
-
-/* Reset Control Register 2 */
-#define SP_RESET_CTRL2_REG		0x07
-#define SP_AUX_RST			BIT(2)
-#define SP_SERDES_FIFO_RST		BIT(1)
-#define SP_I2C_REG_RST			BIT(0)
-
-/* Video Control Register 1 */
-#define SP_VID_CTRL1_REG		0x08
-#define SP_VIDEO_EN			BIT(7)
-#define SP_VIDEO_MUTE			BIT(2)
-#define SP_DE_GEN			BIT(1)
-#define SP_DEMUX			BIT(0)
-
-/* Video Control Register 2 */
-#define SP_VID_CTRL2_REG		0x09
-#define SP_IN_COLOR_F_MASK		0x03
-#define SP_IN_YC_BIT_SEL		BIT(2)
-#define SP_IN_BPC_MASK			0x70
-#define SP_IN_BPC_SHIFT			4
-#  define SP_IN_BPC_12BIT		0x03
-#  define SP_IN_BPC_10BIT		0x02
-#  define SP_IN_BPC_8BIT		0x01
-#  define SP_IN_BPC_6BIT		0x00
-#define SP_IN_D_RANGE			BIT(7)
-
-/* Video Control Register 3 */
-#define SP_VID_CTRL3_REG		0x0a
-#define SP_HPD_OUT			BIT(6)
-
-/* Video Control Register 5 */
-#define SP_VID_CTRL5_REG		0x0c
-#define SP_CSC_STD_SEL			BIT(7)
-#define SP_XVYCC_RNG_LMT		BIT(6)
-#define SP_RANGE_Y2R			BIT(5)
-#define SP_CSPACE_Y2R			BIT(4)
-#define SP_RGB_RNG_LMT			BIT(3)
-#define SP_Y_RNG_LMT			BIT(2)
-#define SP_RANGE_R2Y			BIT(1)
-#define SP_CSPACE_R2Y			BIT(0)
-
-/* Video Control Register 6 */
-#define SP_VID_CTRL6_REG		0x0d
-#define SP_TEST_PATTERN_EN		BIT(7)
-#define SP_VIDEO_PROCESS_EN		BIT(6)
-#define SP_VID_US_MODE			BIT(3)
-#define SP_VID_DS_MODE			BIT(2)
-#define SP_UP_SAMPLE			BIT(1)
-#define SP_DOWN_SAMPLE			BIT(0)
-
-/* Video Control Register 8 */
-#define SP_VID_CTRL8_REG		0x0f
-#define SP_VID_VRES_TH			BIT(0)
-
-/* Total Line Status Low Byte Register */
-#define SP_TOTAL_LINE_STAL_REG		0x24
-
-/* Total Line Status High Byte Register */
-#define SP_TOTAL_LINE_STAH_REG		0x25
-
-/* Active Line Status Low Byte Register */
-#define SP_ACT_LINE_STAL_REG		0x26
-
-/* Active Line Status High Byte Register */
-#define SP_ACT_LINE_STAH_REG		0x27
-
-/* Vertical Front Porch Status Register */
-#define SP_V_F_PORCH_STA_REG		0x28
-
-/* Vertical SYNC Width Status Register */
-#define SP_V_SYNC_STA_REG		0x29
-
-/* Vertical Back Porch Status Register */
-#define SP_V_B_PORCH_STA_REG		0x2a
-
-/* Total Pixel Status Low Byte Register */
-#define SP_TOTAL_PIXEL_STAL_REG		0x2b
-
-/* Total Pixel Status High Byte Register */
-#define SP_TOTAL_PIXEL_STAH_REG		0x2c
-
-/* Active Pixel Status Low Byte Register */
-#define SP_ACT_PIXEL_STAL_REG		0x2d
-
-/* Active Pixel Status High Byte Register */
-#define SP_ACT_PIXEL_STAH_REG		0x2e
-
-/* Horizontal Front Porch Status Low Byte Register */
-#define SP_H_F_PORCH_STAL_REG		0x2f
-
-/* Horizontal Front Porch Statys High Byte Register */
-#define SP_H_F_PORCH_STAH_REG		0x30
-
-/* Horizontal SYNC Width Status Low Byte Register */
-#define SP_H_SYNC_STAL_REG		0x31
-
-/* Horizontal SYNC Width Status High Byte Register */
-#define SP_H_SYNC_STAH_REG		0x32
-
-/* Horizontal Back Porch Status Low Byte Register */
-#define SP_H_B_PORCH_STAL_REG		0x33
-
-/* Horizontal Back Porch Status High Byte Register */
-#define SP_H_B_PORCH_STAH_REG		0x34
-
-/* InfoFrame AVI Packet DB1 Register */
-#define SP_INFOFRAME_AVI_DB1_REG	0x70
-
-/* Bit Control Specific Register */
-#define SP_BIT_CTRL_SPECIFIC_REG	0x80
-#define SP_BIT_CTRL_SELECT_SHIFT	1
-#define SP_ENABLE_BIT_CTRL		BIT(0)
-
-/* InfoFrame Audio Packet DB1 Register */
-#define SP_INFOFRAME_AUD_DB1_REG	0x83
-
-/* InfoFrame MPEG Packet DB1 Register */
-#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
-
-/* Audio Channel Status Registers */
-#define SP_AUD_CH_STATUS_BASE		0xd0
-
-/* Audio Channel Num Register 5 */
-#define SP_I2S_CHANNEL_NUM_MASK		0xe0
-#  define SP_I2S_CH_NUM_1		(0x00 << 5)
-#  define SP_I2S_CH_NUM_2		(0x01 << 5)
-#  define SP_I2S_CH_NUM_3		(0x02 << 5)
-#  define SP_I2S_CH_NUM_4		(0x03 << 5)
-#  define SP_I2S_CH_NUM_5		(0x04 << 5)
-#  define SP_I2S_CH_NUM_6		(0x05 << 5)
-#  define SP_I2S_CH_NUM_7		(0x06 << 5)
-#  define SP_I2S_CH_NUM_8		(0x07 << 5)
-#define SP_EXT_VUCP			BIT(2)
-#define SP_VBIT				BIT(1)
-#define SP_AUDIO_LAYOUT			BIT(0)
-
-/* Analog Debug Register 2 */
-#define SP_ANALOG_DEBUG2_REG		0xdd
-#define SP_FORCE_SW_OFF_BYPASS		0x20
-#define SP_XTAL_FRQ			0x1c
-#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
-#  define SP_XTAL_FRQ_24M		(0x01 << 2)
-#  define SP_XTAL_FRQ_25M		(0x02 << 2)
-#  define SP_XTAL_FRQ_26M		(0x03 << 2)
-#  define SP_XTAL_FRQ_27M		(0x04 << 2)
-#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
-#  define SP_XTAL_FRQ_52M		(0x06 << 2)
-#define SP_POWERON_TIME_1P5MS		0x03
-
-/* Analog Control 0 Register */
-#define SP_ANALOG_CTRL0_REG		0xe1
-
-/* Common Interrupt Status Register 1 */
-#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
-#define SP_PLL_LOCK_CHG			0x40
-
-/* Common Interrupt Status Register 2 */
-#define SP_COMMON_INT_STATUS2		0xf2
-#define SP_HDCP_AUTH_CHG		BIT(1)
-#define SP_HDCP_AUTH_DONE		BIT(0)
-
-#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
-
-/* Common Interrupt Status Register 4 */
-#define SP_COMMON_INT_STATUS4_REG	0xf4
-#define SP_HPD_IRQ			BIT(6)
-#define SP_HPD_ESYNC_ERR		BIT(4)
-#define SP_HPD_CHG			BIT(2)
-#define SP_HPD_LOST			BIT(1)
-#define SP_HPD_PLUG			BIT(0)
-
-/* DP Interrupt Status Register */
-#define SP_DP_INT_STATUS1_REG		0xf7
-#define SP_TRAINING_FINISH		BIT(5)
-#define SP_POLLING_ERR			BIT(4)
-
-/* Common Interrupt Mask Register */
-#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
-
-#define SP_COMMON_INT_MASK4_REG		0xfb
-
-/* DP Interrupts Mask Register */
-#define SP_DP_INT_MASK1_REG		0xfe
-
-/* Interrupt Control Register */
-#define SP_INT_CTRL_REG			0xff
-
 /***************************************************************/
 /* Register definition of device address 0x7a                  */
 /***************************************************************/
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
new file mode 100644
index 000000000000..6295be668cae
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -0,0 +1,247 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ */
+#ifndef _ANALOGIX_I2C_DPTX_H_
+#define _ANALOGIX_I2C_DPTX_H_
+
+#define ANALOGIX_I2C_DPTX		0x70
+
+/***************************************************************/
+/* Register definition of device address 0x70                  */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG		0x00
+#define SP_AUTH_FAIL			BIT(5)
+#define SP_AUTHEN_PASS			BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG		0x01
+#define SP_RX_REPEATER			BIT(6)
+#define SP_RE_AUTH			BIT(5)
+#define SP_SW_AUTH_OK			BIT(4)
+#define SP_HARD_AUTH_EN			BIT(3)
+#define SP_HDCP_ENC_EN			BIT(2)
+#define SP_BKSV_SRM_PASS		BIT(1)
+#define SP_KSVLIST_VLD			BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define	SP_HDCP_RX_BSTATUS0_REG		0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define	SP_HDCP_RX_BSTATUS1_REG		0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG	0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG	0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG	0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG	0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG	0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG	0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG		0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG		0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG		0x5f
+#define SP_DISABLE_SYNC_HDCP		BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG		0x60
+#define SP_OTP_KEY_PROTECT2_REG		0x61
+#define SP_OTP_KEY_PROTECT3_REG		0x62
+#define SP_OTP_PSW1			0xa2
+#define SP_OTP_PSW2			0x7e
+#define SP_OTP_PSW3			0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE		(0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA			BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS			BIT(6)
+#define SP_STRM_VALID			BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE		BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG		0x84
+#define SP_COLOR_F_MASK			0x06
+#define SP_COLOR_F_SHIFT		1
+#define SP_BPC_MASK			0xe0
+#define SP_BPC_SHIFT			5
+#  define SP_BPC_6BITS			0x00
+#  define SP_BPC_8BITS			0x01
+#  define SP_BPC_10BITS			0x02
+#  define SP_BPC_12BITS			0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG		0x87
+#define SP_AUD_EN			BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG	0x88
+#define SP_I2C_GEN_10US_TIMER1_REG	0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG		0x90
+#define SP_AUD_IF_UP			BIT(7)
+#define SP_AVI_IF_UD			BIT(6)
+#define SP_MPEG_IF_UD			BIT(5)
+#define SP_SPD_IF_UD			BIT(4)
+#define SP_AUD_IF_EN			BIT(3)
+#define SP_AVI_IF_EN			BIT(2)
+#define SP_MPEG_IF_EN			BIT(1)
+#define SP_SPD_IF_EN			BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG		0x92
+#define SP_AUTO_EN			BIT(7)
+#define SP_AUTO_START			BIT(5)
+#define SP_LINK_POLLING			BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG	0xa0
+#define SP_LINK_BW_SET_MASK		0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG		0xa3
+#define SP_TX_SW_SET_MASK		0x1b
+#define SP_MAX_PRE_REACH		BIT(5)
+#define SP_MAX_DRIVE_REACH		BIT(4)
+#define SP_PRE_EMP_LEVEL1		BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1		BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG		0xa8
+#define SP_LT_ERROR_TYPE_MASK		0x70
+#  define SP_LT_NO_ERROR		0x00
+#  define SP_LT_AUX_WRITE_ERROR		0x01
+#  define SP_LT_MAX_DRIVE_REACHED	0x02
+#  define SP_LT_WRONG_LANE_COUNT_SET	0x03
+#  define SP_LT_LOOP_SAME_5_TIME	0x04
+#  define SP_LT_CR_FAIL_IN_EQ		0x05
+#  define SP_LT_EQ_LOOP_5_TIME		0x06
+#define SP_LT_EN			BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG	0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG	0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG		0xb0
+#define SP_DEBUG_PLL_LOCK		BIT(4)
+#define SP_POLLING_EN			BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG		0xb4
+#define SP_AUTO_POLLING_DISABLE		BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG	0xb8
+#define SP_M_VID_DEBUG			BIT(5)
+#define SP_NEW_PRBS7			BIT(4)
+#define SP_INSERT_ER			BIT(1)
+#define SP_PRBS31_EN			BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG		0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG		0xc7
+#define SP_PLL_RST			BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG	0xc8
+#define SP_CH0_PD			BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG		0xcd
+#define SP_EQ_TRAINING_LOOP		BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG	0xce
+#define SP_I2C_STRETCH_DISABLE		BIT(7)
+
+#define SP_I2C_EXTRA_ADDR		0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG	0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG	0xd9
+#define SP_M_GEN_CLK_SEL		BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG		0xe0
+#define SP_AUX_STATUS			0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG		0xe2
+#define SP_DEFER_CTRL_EN		BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG		0xe4
+#define SP_BUF_DATA_COUNT_MASK		0x1f
+#define SP_BUF_CLR			BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG		0xe5
+#define SP_AUX_TX_COMM_MASK		0x0f
+#define SP_AUX_LENGTH_MASK		0xf0
+#define SP_AUX_LENGTH_SHIFT		4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG		0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG		0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG		0xe8
+#define SP_AUX_ADDR_19_16_MASK		0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG		0xe9
+#define SP_AUX_SEL_RXCM			BIT(6)
+#define SP_AUX_CHSEL			BIT(3)
+#define SP_AUX_PN_INV			BIT(2)
+#define SP_ADDR_ONLY			BIT(1)
+#define SP_AUX_EN			BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG		0xea
+#define SP_INFO_FRAME_VSC_EN		BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG		0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG		0xec
+#define SP_WAIT_COUNTER_7_0_MASK	0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG		0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG		0xf0
+
+#endif
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
new file mode 100644
index 000000000000..c1030e0f74cc
--- /dev/null
+++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -0,0 +1,233 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ */
+#ifndef _ANALOGIX_I2C_TXCOMMON_H_
+#define _ANALOGIX_I2C_TXCOMMON_H_
+
+#define ANALOGIX_I2C_TXCOMMON		0x72
+
+/***************************************************************/
+/* Register definition of device address 0x72                  */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG		0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG		0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG		0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG		0x05
+#define SP_REGISTER_PD			BIT(7)
+#define SP_HDCP_PD			BIT(5)
+#define SP_AUDIO_PD			BIT(4)
+#define SP_VIDEO_PD			BIT(3)
+#define SP_LINK_PD			BIT(2)
+#define SP_TOTAL_PD			BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG		0x06
+#define SP_MISC_RST			BIT(7)
+#define SP_VIDCAP_RST			BIT(6)
+#define SP_VIDFIF_RST			BIT(5)
+#define SP_AUDFIF_RST			BIT(4)
+#define SP_AUDCAP_RST			BIT(3)
+#define SP_HDCP_RST			BIT(2)
+#define SP_SW_RST			BIT(1)
+#define SP_HW_RST			BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG		0x07
+#define SP_AUX_RST			BIT(2)
+#define SP_SERDES_FIFO_RST		BIT(1)
+#define SP_I2C_REG_RST			BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG		0x08
+#define SP_VIDEO_EN			BIT(7)
+#define SP_VIDEO_MUTE			BIT(2)
+#define SP_DE_GEN			BIT(1)
+#define SP_DEMUX			BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG		0x09
+#define SP_IN_COLOR_F_MASK		0x03
+#define SP_IN_YC_BIT_SEL		BIT(2)
+#define SP_IN_BPC_MASK			0x70
+#define SP_IN_BPC_SHIFT			4
+#  define SP_IN_BPC_12BIT		0x03
+#  define SP_IN_BPC_10BIT		0x02
+#  define SP_IN_BPC_8BIT		0x01
+#  define SP_IN_BPC_6BIT		0x00
+#define SP_IN_D_RANGE			BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG		0x0a
+#define SP_HPD_OUT			BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG		0x0c
+#define SP_CSC_STD_SEL			BIT(7)
+#define SP_XVYCC_RNG_LMT		BIT(6)
+#define SP_RANGE_Y2R			BIT(5)
+#define SP_CSPACE_Y2R			BIT(4)
+#define SP_RGB_RNG_LMT			BIT(3)
+#define SP_Y_RNG_LMT			BIT(2)
+#define SP_RANGE_R2Y			BIT(1)
+#define SP_CSPACE_R2Y			BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG		0x0d
+#define SP_TEST_PATTERN_EN		BIT(7)
+#define SP_VIDEO_PROCESS_EN		BIT(6)
+#define SP_VID_US_MODE			BIT(3)
+#define SP_VID_DS_MODE			BIT(2)
+#define SP_UP_SAMPLE			BIT(1)
+#define SP_DOWN_SAMPLE			BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG		0x0f
+#define SP_VID_VRES_TH			BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG		0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG		0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG		0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG		0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG		0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG		0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG		0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG		0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG		0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG		0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG		0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG		0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG		0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG		0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG		0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG		0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG		0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG	0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG	0x80
+#define SP_BIT_CTRL_SELECT_SHIFT	1
+#define SP_ENABLE_BIT_CTRL		BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG	0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG	0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE		0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK		0xe0
+#  define SP_I2S_CH_NUM_1		(0x00 << 5)
+#  define SP_I2S_CH_NUM_2		(0x01 << 5)
+#  define SP_I2S_CH_NUM_3		(0x02 << 5)
+#  define SP_I2S_CH_NUM_4		(0x03 << 5)
+#  define SP_I2S_CH_NUM_5		(0x04 << 5)
+#  define SP_I2S_CH_NUM_6		(0x05 << 5)
+#  define SP_I2S_CH_NUM_7		(0x06 << 5)
+#  define SP_I2S_CH_NUM_8		(0x07 << 5)
+#define SP_EXT_VUCP			BIT(2)
+#define SP_VBIT				BIT(1)
+#define SP_AUDIO_LAYOUT			BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG		0xdd
+#define SP_FORCE_SW_OFF_BYPASS		0x20
+#define SP_XTAL_FRQ			0x1c
+#  define SP_XTAL_FRQ_19M2		(0x00 << 2)
+#  define SP_XTAL_FRQ_24M		(0x01 << 2)
+#  define SP_XTAL_FRQ_25M		(0x02 << 2)
+#  define SP_XTAL_FRQ_26M		(0x03 << 2)
+#  define SP_XTAL_FRQ_27M		(0x04 << 2)
+#  define SP_XTAL_FRQ_38M4		(0x05 << 2)
+#  define SP_XTAL_FRQ_52M		(0x06 << 2)
+#define SP_POWERON_TIME_1P5MS		0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG		0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE	(0xf1 - 1)
+#define SP_PLL_LOCK_CHG			0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2		0xf2
+#define SP_HDCP_AUTH_CHG		BIT(1)
+#define SP_HDCP_AUTH_DONE		BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL		BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG	0xf4
+#define SP_HPD_IRQ			BIT(6)
+#define SP_HPD_ESYNC_ERR		BIT(4)
+#define SP_HPD_CHG			BIT(2)
+#define SP_HPD_LOST			BIT(1)
+#define SP_HPD_PLUG			BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG		0xf7
+#define SP_TRAINING_FINISH		BIT(5)
+#define SP_POLLING_ERR			BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE		(0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG		0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG		0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG			0xff
+
+#endif /* _ANALOGIX_I2C_TXCOMMON_H_ */