[v4,3/9] ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver
diff mbox series

Message ID 20191104115352.8728-4-frieder.schrempf@kontron.de
State New
Headers show
Series
  • Add support for more Kontron i.MX6UL/ULL SoMs and boards
Related show

Commit Message

Frieder Schrempf Nov. 4, 2019, 11:54 a.m. UTC
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The snvs-poweroff driver can power off the system by pulling the
PMIC_ON_REQ signal low, to let the PMIC disable the power.
The Kontron SoMs do not have this signal connected, so let's remove
the node.

This fixes a real issue when the signal is asserted at poweroff,
but not actually causing the power to turn off. It was observed,
that in this case the system would not shut down properly.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
---
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 4 ----
 1 file changed, 4 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
index 0205fd56d975..4e99e6c79a68 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -157,10 +157,6 @@ 
 	status = "okay";
 };
 
-&snvs_poweroff {
-	status = "okay";
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;