[v4,7/9] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent polarity to usb nodes
diff mbox series

Message ID 20191104115352.8728-8-frieder.schrempf@kontron.de
State New
Headers show
Series
  • Add support for more Kontron i.MX6UL/ULL SoMs and boards
Related show

Commit Message

Frieder Schrempf Nov. 4, 2019, 11:54 a.m. UTC
From: Frieder Schrempf <frieder.schrempf@kontron.de>

To silence the warnings shown by the driver at boot time, we add a
fixed regulator for the 5V supply of usbotg2 and specify the polarity
of the overcurrent signal for usbotg1.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 93a0f0ca5b84..5725e5fc271b 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -45,6 +45,13 @@ 
 		regulator-max-microvolt = <3300000>;
 	};
 
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
 	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb_otg1_vbus";
@@ -187,6 +194,7 @@ 
 	srp-disable;
 	hnp-disable;
 	adp-disable;
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
@@ -194,6 +202,7 @@ 
 &usbotg2 {
 	dr_mode = "host";
 	disable-over-current;
+	vbus-supply = <&reg_5v>;
 	status = "okay";
 };