diff mbox series

[06/11] thermal: mediatek: Appease the kernel-doc deity

Message ID 2961e4ac4b32ea7db8b5f6916751a5c02ee85960.1573046440.git.amit.kucheria@linaro.org (mailing list archive)
State New, archived
Headers show
Series thermal: clean up output of make W=1 | expand

Commit Message

Amit Kucheria Nov. 6, 2019, 1:28 p.m. UTC 
Replace a comment starting with /** by simply /* to avoid having it
interpreted as a kernel-doc comment. Describe missing function
parameters where needed.

Fixes up the following warnings when compiled with make W=1:

linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
'
linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
or member 'sensno' not described in 'raw_to_mcelsius'

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/mtk_thermal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Viresh Kumar Nov. 7, 2019, 2:19 a.m. UTC | #1 
On 06-11-19, 18:58, Amit Kucheria wrote:
> Replace a comment starting with /** by simply /* to avoid having it
> interpreted as a kernel-doc comment. Describe missing function
> parameters where needed.
> 
> Fixes up the following warnings when compiled with make W=1:
> 
> linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> '
> linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> or member 'sensno' not described in 'raw_to_mcelsius'
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/mtk_thermal.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index acf4854cbb8b8..76e30603d4d58 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
>  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
> -/**
> +/*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
>   * four temperature sensors simultaneously. The MT8173 has a total of 5
>   * temperature sensors. We use each bank to measure a certain area of the
> @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
>  	.sensor_mux_values = mt8173_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2701 thermal controller has one bank, which can read up to
>   * three temperature sensors simultaneously. The MT2701 has a total of 3
>   * temperature sensors.
> @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
>  	.sensor_mux_values = mt2701_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT2712 thermal controller has one bank, which can read up to
>   * four temperature sensors simultaneously. The MT2712 has a total of 4
>   * temperature sensors.
> @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.sensor_mux_values = mt7622_mux_values,
>  };
>  
> -/**
> +/*
>   * The MT8183 thermal controller has one bank for the current SW framework.
>   * The MT8183 has a total of 6 temperature sensors.
>   * There are two thermal controller to control the six sensor.
> @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>   * data, and this indeed needs the temperatures of the individual banks
>   * for making better decisions.
>   */
> -
>  static const struct mtk_thermal_data mt8183_thermal_data = {
>  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
>  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
>  
>  /**
>   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> - * @mt:		The thermal controller
> + * @mt:	The thermal controller
> + * @sensno:	sensor number
>   * @raw:	raw ADC value

This doesn't look related to $subject

>   *
>   * This converts the raw ADC value to mcelsius using the SoC specific
> -- 
> 2.17.1
Viresh Kumar Nov. 7, 2019, 2:20 a.m. UTC | #2 
On 07-11-19, 07:49, Viresh Kumar wrote:
> On 06-11-19, 18:58, Amit Kucheria wrote:
> > Replace a comment starting with /** by simply /* to avoid having it
> > interpreted as a kernel-doc comment. Describe missing function
> > parameters where needed.
> > 
> > Fixes up the following warnings when compiled with make W=1:
> > 
> > linux.git/drivers/thermal/mtk_thermal.c:374: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8173_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:413: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2701_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:443: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt2712_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:499: warning: cannot understand
> > function prototype: 'const struct mtk_thermal_data mt8183_thermal_data =
> > '
> > linux.git/drivers/thermal/mtk_thermal.c:529: warning: Function parameter
> > or member 'sensno' not described in 'raw_to_mcelsius'
> > 
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> >  drivers/thermal/mtk_thermal.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> > index acf4854cbb8b8..76e30603d4d58 100644
> > --- a/drivers/thermal/mtk_thermal.c
> > +++ b/drivers/thermal/mtk_thermal.c
> > @@ -358,7 +358,7 @@ static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
> >  static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
> >  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
> >  
> > -/**
> > +/*
> >   * The MT8173 thermal controller has four banks. Each bank can read up to
> >   * four temperature sensors simultaneously. The MT8173 has a total of 5
> >   * temperature sensors. We use each bank to measure a certain area of the
> > @@ -400,7 +400,7 @@ static const struct mtk_thermal_data mt8173_thermal_data = {
> >  	.sensor_mux_values = mt8173_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2701 thermal controller has one bank, which can read up to
> >   * three temperature sensors simultaneously. The MT2701 has a total of 3
> >   * temperature sensors.
> > @@ -430,7 +430,7 @@ static const struct mtk_thermal_data mt2701_thermal_data = {
> >  	.sensor_mux_values = mt2701_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT2712 thermal controller has one bank, which can read up to
> >   * four temperature sensors simultaneously. The MT2712 has a total of 4
> >   * temperature sensors.
> > @@ -484,7 +484,7 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >  	.sensor_mux_values = mt7622_mux_values,
> >  };
> >  
> > -/**
> > +/*
> >   * The MT8183 thermal controller has one bank for the current SW framework.
> >   * The MT8183 has a total of 6 temperature sensors.
> >   * There are two thermal controller to control the six sensor.
> > @@ -495,7 +495,6 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
> >   * data, and this indeed needs the temperatures of the individual banks
> >   * for making better decisions.
> >   */
> > -
> >  static const struct mtk_thermal_data mt8183_thermal_data = {
> >  	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
> >  	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
> > @@ -519,7 +518,8 @@ static const struct mtk_thermal_data mt8183_thermal_data = {
> >  
> >  /**
> >   * raw_to_mcelsius - convert a raw ADC value to mcelsius
> > - * @mt:		The thermal controller
> > + * @mt:	The thermal controller
> > + * @sensno:	sensor number
> >   * @raw:	raw ADC value
> 
> This doesn't look related to $subject

I take this statement back :)

Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
diff mbox series

Patch

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index acf4854cbb8b8..76e30603d4d58 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -358,7 +358,7 @@  static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
 static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
 static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
 
-/**
+/*
  * The MT8173 thermal controller has four banks. Each bank can read up to
  * four temperature sensors simultaneously. The MT8173 has a total of 5
  * temperature sensors. We use each bank to measure a certain area of the
@@ -400,7 +400,7 @@  static const struct mtk_thermal_data mt8173_thermal_data = {
 	.sensor_mux_values = mt8173_mux_values,
 };
 
-/**
+/*
  * The MT2701 thermal controller has one bank, which can read up to
  * three temperature sensors simultaneously. The MT2701 has a total of 3
  * temperature sensors.
@@ -430,7 +430,7 @@  static const struct mtk_thermal_data mt2701_thermal_data = {
 	.sensor_mux_values = mt2701_mux_values,
 };
 
-/**
+/*
  * The MT2712 thermal controller has one bank, which can read up to
  * four temperature sensors simultaneously. The MT2712 has a total of 4
  * temperature sensors.
@@ -484,7 +484,7 @@  static const struct mtk_thermal_data mt7622_thermal_data = {
 	.sensor_mux_values = mt7622_mux_values,
 };
 
-/**
+/*
  * The MT8183 thermal controller has one bank for the current SW framework.
  * The MT8183 has a total of 6 temperature sensors.
  * There are two thermal controller to control the six sensor.
@@ -495,7 +495,6 @@  static const struct mtk_thermal_data mt7622_thermal_data = {
  * data, and this indeed needs the temperatures of the individual banks
  * for making better decisions.
  */
-
 static const struct mtk_thermal_data mt8183_thermal_data = {
 	.auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
 	.num_banks = MT8183_NUM_SENSORS_PER_ZONE,
@@ -519,7 +518,8 @@  static const struct mtk_thermal_data mt8183_thermal_data = {
 
 /**
  * raw_to_mcelsius - convert a raw ADC value to mcelsius
- * @mt:		The thermal controller
+ * @mt:	The thermal controller
+ * @sensno:	sensor number
  * @raw:	raw ADC value
  *
  * This converts the raw ADC value to mcelsius using the SoC specific