diff mbox series

[2/2] dt-bindings: mtd: mtk-quadspi: update bindings for mmap flash read

Message ID 20191106140748.13100-3-gch981213@gmail.com (mailing list archive)
State New, archived
Headers show
Series mtd: mtk-quadspi: add support for memory-mapped flash reading | expand

Commit Message

Chuanhong Guo Nov. 6, 2019, 2:07 p.m. UTC
update register descriptions and add an example binding using it.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
---
 .../devicetree/bindings/mtd/mtk-quadspi.txt   | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

Comments

Rob Herring Nov. 7, 2019, 1:09 a.m. UTC | #1
On Wed, Nov 06, 2019 at 10:07:48PM +0800, Chuanhong Guo wrote:
> update register descriptions and add an example binding using it.
> 
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
> ---
>  .../devicetree/bindings/mtd/mtk-quadspi.txt   | 21 ++++++++++++++++++-
>  1 file changed, 20 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> index a12e3b5c495d..4860f6e96f5a 100644
> --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> @@ -12,7 +12,10 @@ Required properties:
>  		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
>  		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
>  		  "mediatek,mt8173-nor"
> -- reg: 		  physical base address and length of the controller's register
> +- reg: 		  Contains one or two entries, each of which is a tuple consisting of a
> +		  physical address and length. The first entry is the address and length
> +		  of the controller register set. The optional second entry is the address
> +		  and length of the area where the nor flash is mapped to.

All the compatibles support 2 entries? If not, which ones?

>  - clocks: 	  the phandle of the clocks needed by the nor controller
>  - clock-names: 	  the names of the clocks
>  		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
> @@ -48,3 +51,19 @@ nor_flash: spi@1100d000 {
>  	};
>  };
>  
> +nor_flash: spi@11014000 {
> +	compatible = "mediatek,mt7629-nor",
> +		     "mediatek,mt8173-nor";
> +	reg = <0x11014000 0xe0>,
> +	      <0x30000000 0x10000000>;
> +	clocks = <&pericfg CLK_PERI_FLASH_PD>,
> +		 <&topckgen CLK_TOP_FLASH_SEL>;
> +	clock-names = "spi", "sf";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +	};
> +};
> -- 
> 2.21.0
>
Chuanhong Guo Nov. 7, 2019, 9:25 a.m. UTC | #2
Hi!

On Thu, Nov 7, 2019 at 9:09 AM Rob Herring <robh@kernel.org> wrote:
>
> On Wed, Nov 06, 2019 at 10:07:48PM +0800, Chuanhong Guo wrote:
> > update register descriptions and add an example binding using it.
> >
> > Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
> > ---
> >  .../devicetree/bindings/mtd/mtk-quadspi.txt   | 21 ++++++++++++++++++-
> >  1 file changed, 20 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > index a12e3b5c495d..4860f6e96f5a 100644
> > --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > @@ -12,7 +12,10 @@ Required properties:
> >                 "mediatek,mt7623-nor", "mediatek,mt8173-nor"
> >                 "mediatek,mt7629-nor", "mediatek,mt8173-nor"
> >                 "mediatek,mt8173-nor"
> > -- reg:                 physical base address and length of the controller's register
> > +- reg:                 Contains one or two entries, each of which is a tuple consisting of a
> > +               physical address and length. The first entry is the address and length
> > +               of the controller register set. The optional second entry is the address
> > +               and length of the area where the nor flash is mapped to.
>
> All the compatibles support 2 entries? If not, which ones?

It should be. I implemented it as an optional feature only because I
don't know the mapped address space for all these chips and can't
update every device trees.

Regards,
Chuanhong Guo
Chuanhong Guo Nov. 8, 2019, 3:51 a.m. UTC | #3
Hi!

On Wed, Nov 6, 2019 at 10:08 PM Chuanhong Guo <gch981213@gmail.com> wrote:
>
> update register descriptions and add an example binding using it.
>
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

I'll abandon this patchset and implement DMA reading instead.

Regards,
Chuanhong Guo
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index a12e3b5c495d..4860f6e96f5a 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -12,7 +12,10 @@  Required properties:
 		  "mediatek,mt7623-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt7629-nor", "mediatek,mt8173-nor"
 		  "mediatek,mt8173-nor"
-- reg: 		  physical base address and length of the controller's register
+- reg: 		  Contains one or two entries, each of which is a tuple consisting of a
+		  physical address and length. The first entry is the address and length
+		  of the controller register set. The optional second entry is the address
+		  and length of the area where the nor flash is mapped to.
 - clocks: 	  the phandle of the clocks needed by the nor controller
 - clock-names: 	  the names of the clocks
 		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
@@ -48,3 +51,19 @@  nor_flash: spi@1100d000 {
 	};
 };
 
+nor_flash: spi@11014000 {
+	compatible = "mediatek,mt7629-nor",
+		     "mediatek,mt8173-nor";
+	reg = <0x11014000 0xe0>,
+	      <0x30000000 0x10000000>;
+	clocks = <&pericfg CLK_PERI_FLASH_PD>,
+		 <&topckgen CLK_TOP_FLASH_SEL>;
+	clock-names = "spi", "sf";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};