[4.4.y-cip,58/83] mmc: tmio: discard obsolete SDIO irqs before enabling irqs
diff mbox series

Message ID 1573115572-13513-59-git-send-email-biju.das@bp.renesas.com
State Changes Requested
Headers show
Series
  • Add RZ/G1C SD/eMMC support
Related show

Commit Message

Biju Das Nov. 7, 2019, 8:32 a.m. UTC
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

commit ee28981535f4261ed5d127ddf4d1a3f8778f520d upstream.

Before enabling SDIO irqs, clear the status bit, so we discard old and
stale interrupts. Needed to get two wireless cards working. Use the
newly introduced macro in all places.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
---
 drivers/mmc/host/tmio_mmc.h     |  2 ++
 drivers/mmc/host/tmio_mmc_pio.c | 13 +++++++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

Patch
diff mbox series

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index ba2838c..e414670 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -90,6 +90,8 @@ 
 #define TMIO_SDIO_STAT_EXWT	0x8000
 #define TMIO_SDIO_MASK_ALL	0xc007
 
+#define TMIO_SDIO_SETBITS_MASK	0x0006
+
 /* Define some IRQ masks */
 /* This is the mask used at reset by the chip */
 #define TMIO_MASK_ALL           0x837f031d
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index a0b5db3..a152999 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -134,12 +134,21 @@  static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 
 	if (enable && !host->sdio_irq_enabled) {
+		u16 sdio_status;
+
 		/* Keep device active while SDIO irq is enabled */
 		pm_runtime_get_sync(mmc_dev(mmc));
-		host->sdio_irq_enabled = true;
 
+		host->sdio_irq_enabled = true;
 		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL &
 					~TMIO_SDIO_STAT_IOIRQ;
+
+		/* Clear obsolete interrupts before enabling */
+		sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL;
+		if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
+			sdio_status |= TMIO_SDIO_SETBITS_MASK;
+		sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);
+
 		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);
 	} else if (!enable && host->sdio_irq_enabled) {
 		host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;
@@ -725,7 +734,7 @@  static bool __tmio_mmc_sdio_irq(int irq, void *devid)
 
 	sdio_status = status & ~TMIO_SDIO_MASK_ALL;
 	if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS)
-		sdio_status |= 6;
+		sdio_status |= TMIO_SDIO_SETBITS_MASK;
 
 	sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status);