[v2,2/2] remoteproc: qcom_q6v5_mss: Validate each segment during loading
diff mbox series

Message ID 20191109004033.1496871-3-bjorn.andersson@linaro.org
State New
Headers show
Series
  • remoteproc: mss: Improve mem_assign and firmware load
Related show

Commit Message

Bjorn Andersson Nov. 9, 2019, 12:40 a.m. UTC
The code used to sync with the MBA after each segment loaded and this is
still what's done downstream. So reduce the delta towards downstream by
switching to a model where the content is iteratively validated.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v1:
- Picked up Jeff's r-b and t-b

 drivers/remoteproc/qcom_q6v5_mss.c | 76 ++++++++++++++++++++----------
 1 file changed, 51 insertions(+), 25 deletions(-)

Comments

Luca Weiss Nov. 10, 2019, 2:05 p.m. UTC | #1
Hi Bjorn,

with your patches and modifications in qcom-msm8974.dtsi, I can boot the modem 
successfully on the Fairphone 2, without the 'hack' commit we had in the tree 
before! Thanks!

Tested-by: Luca Weiss <luca@z3ntu.xyz>

On Samstag, 9. November 2019 01:40:33 CET Bjorn Andersson wrote:
> The code used to sync with the MBA after each segment loaded and this is
> still what's done downstream. So reduce the delta towards downstream by
> switching to a model where the content is iteratively validated.
> 
> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> 
> Changes since v1:
> - Picked up Jeff's r-b and t-b
> 
>  drivers/remoteproc/qcom_q6v5_mss.c | 76 ++++++++++++++++++++----------
>  1 file changed, 51 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> b/drivers/remoteproc/qcom_q6v5_mss.c index efab574b2e12..914d5546e1cf
> 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -358,23 +358,29 @@ static void q6v5_pds_disable(struct q6v5 *qproc,
> struct device **pds, }
> 
>  static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
> -				   bool remote_owner, phys_addr_t 
addr,
> +				   bool local, bool remote, 
phys_addr_t addr,
>  				   size_t size)
>  {
> -	struct qcom_scm_vmperm next;
> +	struct qcom_scm_vmperm next[2];
> +	int perms = 0;
> 
>  	if (!qproc->need_mem_protection)
>  		return 0;
> -	if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
> -		return 0;
> -	if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
> -		return 0;
> 
> -	next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : 
QCOM_SCM_VMID_HLOS;
> -	next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
> +	if (local) {
> +		next[perms].vmid = QCOM_SCM_VMID_HLOS;
> +		next[perms].perm = QCOM_SCM_PERM_RWX;
> +		perms++;
> +	}
> +
> +	if (remote) {
> +		next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
> +		next[perms].perm = QCOM_SCM_PERM_RW;
> +		perms++;
> +	}
> 
>  	return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
> -				   current_perm, &next, 1);
> +				   current_perm, next, perms);
>  }
> 
>  static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
> @@ -681,7 +687,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc,
> const struct firmware *fw)
> 
>  	/* Hypervisor mapping to access metadata by modem */
>  	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
> -	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, 
size);
> +	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, 
phys,
> size); if (ret) {
>  		dev_err(qproc->dev,
>  			"assigning Q6 access to metadata failed: 
%d\n", ret);
> @@ -699,7 +705,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc,
> const struct firmware *fw) dev_err(qproc->dev, "MPSS header authentication
> failed: %d\n", ret);
> 
>  	/* Metadata authentication done, remove modem access */
> -	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, 
phys,
> size); +	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true,
> false, phys, size); if (xferop_ret)
>  		dev_warn(qproc->dev,
>  			 "mdt buffer not reclaimed system may become 
unstable\n");
> @@ -786,7 +792,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	}
> 
>  	/* Assign MBA image access in DDR to q6 */
> -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
> +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
>  				      qproc->mba_phys, qproc-
>mba_size);
>  	if (ret) {
>  		dev_err(qproc->dev,
> @@ -820,8 +826,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> 
>  reclaim_mba:
> -	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
false,
> -						qproc-
>mba_phys,
> +	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
true,
> +						false, 
qproc->mba_phys,
>  						qproc-
>mba_size);
>  	if (xfermemop_ret) {
>  		dev_err(qproc->dev,
> @@ -888,7 +894,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
>  	/* In case of failure or coredump scenario where reclaiming MBA 
memory
>  	 * could not happen reclaim it here.
>  	 */
> -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
> +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
>  				      qproc->mba_phys,
>  				      qproc->mba_size);
>  	WARN_ON(ret);
> @@ -915,6 +921,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>  	phys_addr_t boot_addr;
>  	phys_addr_t min_addr = PHYS_ADDR_MAX;
>  	phys_addr_t max_addr = 0;
> +	u32 code_length;
>  	bool relocate = false;
>  	char *fw_name;
>  	size_t fw_name_len;
> @@ -965,9 +972,19 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>  	}
> 
>  	/* Try to reset ownership back to Linux */
> -	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
> +	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
>  				qproc->mpss_phys, qproc-
>mpss_size);
> 
> +	/* Share ownership between Linux and MSS, during segment loading */
> +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
> +				      qproc->mpss_phys, qproc-
>mpss_size);
> +	if (ret) {
> +		dev_err(qproc->dev,
> +			"assigning Q6 access to mpss memory failed: 
%d\n", ret);
> +		ret = -EAGAIN;
> +		goto release_firmware;
> +	}
> +
>  	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
>  	qproc->mpss_reloc = mpss_reloc;
>  	/* Load firmware segments */
> @@ -1016,10 +1033,24 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>  			       phdr->p_memsz - phdr->p_filesz);
>  		}
>  		size += phdr->p_memsz;
> +
> +		code_length = readl(qproc->rmb_base + 
RMB_PMI_CODE_LENGTH_REG);
> +		if (!code_length) {
> +			boot_addr = relocate ? qproc->mpss_phys : 
min_addr;
> +			writel(boot_addr, qproc->rmb_base + 
RMB_PMI_CODE_START_REG);
> +			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + 
RMB_MBA_COMMAND_REG);
> +		}
> +		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> +
> +		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> +		if (ret < 0) {
> +			dev_err(qproc->dev, "MPSS authentication 
failed: %d\n", ret);
> +			goto release_firmware;
> +		}
>  	}
> 
>  	/* Transfer ownership of modem ddr region to q6 */
> -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
> +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, 
true,
>  				      qproc->mpss_phys, qproc-
>mpss_size);
>  	if (ret) {
>  		dev_err(qproc->dev,
> @@ -1028,11 +1059,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
>  		goto release_firmware;
>  	}
> 
> -	boot_addr = relocate ? qproc->mpss_phys : min_addr;
> -	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
> -	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> -	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> -
>  	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
>  	if (ret == -ETIMEDOUT)
>  		dev_err(qproc->dev, "MPSS authentication timed out\n");
> @@ -1061,7 +1087,7 @@ static void qcom_q6v5_dump_segment(struct rproc
> *rproc, ret = q6v5_mba_load(qproc);
> 
>  		/* Try to reset ownership back to Linux */
> -		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, 
false,
> +		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, 
false,
>  					qproc->mpss_phys, 
qproc->mpss_size);
>  	}
> 
> @@ -1101,8 +1127,8 @@ static int q6v5_start(struct rproc *rproc)
>  		goto reclaim_mpss;
>  	}
> 
> -	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
false,
> -						qproc-
>mba_phys,
> +	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
true,
> +						false, 
qproc->mba_phys,
>  						qproc-
>mba_size);
>  	if (xfermemop_ret)
>  		dev_err(qproc->dev,
Bjorn Andersson Nov. 11, 2019, 6:45 a.m. UTC | #2
On Sun 10 Nov 06:05 PST 2019, Luca Weiss wrote:

> Hi Bjorn,
> 
> with your patches and modifications in qcom-msm8974.dtsi, I can boot the modem 
> successfully on the Fairphone 2, without the 'hack' commit we had in the tree 
> before! Thanks!
> 
> Tested-by: Luca Weiss <luca@z3ntu.xyz>
> 

Thanks for reminding me about this being an issue in 8974, had forgotten
about that.I'll slap a Fixes on it once I'm applying it.

Regards,
Bjorn

> On Samstag, 9. November 2019 01:40:33 CET Bjorn Andersson wrote:
> > The code used to sync with the MBA after each segment loaded and this is
> > still what's done downstream. So reduce the delta towards downstream by
> > switching to a model where the content is iteratively validated.
> > 
> > Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> > Tested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > 
> > Changes since v1:
> > - Picked up Jeff's r-b and t-b
> > 
> >  drivers/remoteproc/qcom_q6v5_mss.c | 76 ++++++++++++++++++++----------
> >  1 file changed, 51 insertions(+), 25 deletions(-)
> > 
> > diff --git a/drivers/remoteproc/qcom_q6v5_mss.c
> > b/drivers/remoteproc/qcom_q6v5_mss.c index efab574b2e12..914d5546e1cf
> > 100644
> > --- a/drivers/remoteproc/qcom_q6v5_mss.c
> > +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> > @@ -358,23 +358,29 @@ static void q6v5_pds_disable(struct q6v5 *qproc,
> > struct device **pds, }
> > 
> >  static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
> > -				   bool remote_owner, phys_addr_t 
> addr,
> > +				   bool local, bool remote, 
> phys_addr_t addr,
> >  				   size_t size)
> >  {
> > -	struct qcom_scm_vmperm next;
> > +	struct qcom_scm_vmperm next[2];
> > +	int perms = 0;
> > 
> >  	if (!qproc->need_mem_protection)
> >  		return 0;
> > -	if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
> > -		return 0;
> > -	if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
> > -		return 0;
> > 
> > -	next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : 
> QCOM_SCM_VMID_HLOS;
> > -	next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
> > +	if (local) {
> > +		next[perms].vmid = QCOM_SCM_VMID_HLOS;
> > +		next[perms].perm = QCOM_SCM_PERM_RWX;
> > +		perms++;
> > +	}
> > +
> > +	if (remote) {
> > +		next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
> > +		next[perms].perm = QCOM_SCM_PERM_RW;
> > +		perms++;
> > +	}
> > 
> >  	return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
> > -				   current_perm, &next, 1);
> > +				   current_perm, next, perms);
> >  }
> > 
> >  static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
> > @@ -681,7 +687,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc,
> > const struct firmware *fw)
> > 
> >  	/* Hypervisor mapping to access metadata by modem */
> >  	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
> > -	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, 
> size);
> > +	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, 
> phys,
> > size); if (ret) {
> >  		dev_err(qproc->dev,
> >  			"assigning Q6 access to metadata failed: 
> %d\n", ret);
> > @@ -699,7 +705,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc,
> > const struct firmware *fw) dev_err(qproc->dev, "MPSS header authentication
> > failed: %d\n", ret);
> > 
> >  	/* Metadata authentication done, remove modem access */
> > -	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, 
> phys,
> > size); +	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true,
> > false, phys, size); if (xferop_ret)
> >  		dev_warn(qproc->dev,
> >  			 "mdt buffer not reclaimed system may become 
> unstable\n");
> > @@ -786,7 +792,7 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> >  	}
> > 
> >  	/* Assign MBA image access in DDR to q6 */
> > -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
> > +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
> >  				      qproc->mba_phys, qproc-
> >mba_size);
> >  	if (ret) {
> >  		dev_err(qproc->dev,
> > @@ -820,8 +826,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> >  	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
> > 
> >  reclaim_mba:
> > -	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
> false,
> > -						qproc-
> >mba_phys,
> > +	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
> true,
> > +						false, 
> qproc->mba_phys,
> >  						qproc-
> >mba_size);
> >  	if (xfermemop_ret) {
> >  		dev_err(qproc->dev,
> > @@ -888,7 +894,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> >  	/* In case of failure or coredump scenario where reclaiming MBA 
> memory
> >  	 * could not happen reclaim it here.
> >  	 */
> > -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
> > +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
> >  				      qproc->mba_phys,
> >  				      qproc->mba_size);
> >  	WARN_ON(ret);
> > @@ -915,6 +921,7 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >  	phys_addr_t boot_addr;
> >  	phys_addr_t min_addr = PHYS_ADDR_MAX;
> >  	phys_addr_t max_addr = 0;
> > +	u32 code_length;
> >  	bool relocate = false;
> >  	char *fw_name;
> >  	size_t fw_name_len;
> > @@ -965,9 +972,19 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >  	}
> > 
> >  	/* Try to reset ownership back to Linux */
> > -	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
> > +	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
> >  				qproc->mpss_phys, qproc-
> >mpss_size);
> > 
> > +	/* Share ownership between Linux and MSS, during segment loading */
> > +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
> > +				      qproc->mpss_phys, qproc-
> >mpss_size);
> > +	if (ret) {
> > +		dev_err(qproc->dev,
> > +			"assigning Q6 access to mpss memory failed: 
> %d\n", ret);
> > +		ret = -EAGAIN;
> > +		goto release_firmware;
> > +	}
> > +
> >  	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
> >  	qproc->mpss_reloc = mpss_reloc;
> >  	/* Load firmware segments */
> > @@ -1016,10 +1033,24 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >  			       phdr->p_memsz - phdr->p_filesz);
> >  		}
> >  		size += phdr->p_memsz;
> > +
> > +		code_length = readl(qproc->rmb_base + 
> RMB_PMI_CODE_LENGTH_REG);
> > +		if (!code_length) {
> > +			boot_addr = relocate ? qproc->mpss_phys : 
> min_addr;
> > +			writel(boot_addr, qproc->rmb_base + 
> RMB_PMI_CODE_START_REG);
> > +			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + 
> RMB_MBA_COMMAND_REG);
> > +		}
> > +		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> > +
> > +		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
> > +		if (ret < 0) {
> > +			dev_err(qproc->dev, "MPSS authentication 
> failed: %d\n", ret);
> > +			goto release_firmware;
> > +		}
> >  	}
> > 
> >  	/* Transfer ownership of modem ddr region to q6 */
> > -	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
> > +	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, 
> true,
> >  				      qproc->mpss_phys, qproc-
> >mpss_size);
> >  	if (ret) {
> >  		dev_err(qproc->dev,
> > @@ -1028,11 +1059,6 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
> >  		goto release_firmware;
> >  	}
> > 
> > -	boot_addr = relocate ? qproc->mpss_phys : min_addr;
> > -	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
> > -	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
> > -	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
> > -
> >  	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
> >  	if (ret == -ETIMEDOUT)
> >  		dev_err(qproc->dev, "MPSS authentication timed out\n");
> > @@ -1061,7 +1087,7 @@ static void qcom_q6v5_dump_segment(struct rproc
> > *rproc, ret = q6v5_mba_load(qproc);
> > 
> >  		/* Try to reset ownership back to Linux */
> > -		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, 
> false,
> > +		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, 
> false,
> >  					qproc->mpss_phys, 
> qproc->mpss_size);
> >  	}
> > 
> > @@ -1101,8 +1127,8 @@ static int q6v5_start(struct rproc *rproc)
> >  		goto reclaim_mpss;
> >  	}
> > 
> > -	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
> false,
> > -						qproc-
> >mba_phys,
> > +	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, 
> true,
> > +						false, 
> qproc->mba_phys,
> >  						qproc-
> >mba_size);
> >  	if (xfermemop_ret)
> >  		dev_err(qproc->dev,
>

Patch
diff mbox series

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index efab574b2e12..914d5546e1cf 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -358,23 +358,29 @@  static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
 }
 
 static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
-				   bool remote_owner, phys_addr_t addr,
+				   bool local, bool remote, phys_addr_t addr,
 				   size_t size)
 {
-	struct qcom_scm_vmperm next;
+	struct qcom_scm_vmperm next[2];
+	int perms = 0;
 
 	if (!qproc->need_mem_protection)
 		return 0;
-	if (remote_owner && *current_perm == BIT(QCOM_SCM_VMID_MSS_MSA))
-		return 0;
-	if (!remote_owner && *current_perm == BIT(QCOM_SCM_VMID_HLOS))
-		return 0;
 
-	next.vmid = remote_owner ? QCOM_SCM_VMID_MSS_MSA : QCOM_SCM_VMID_HLOS;
-	next.perm = remote_owner ? QCOM_SCM_PERM_RW : QCOM_SCM_PERM_RWX;
+	if (local) {
+		next[perms].vmid = QCOM_SCM_VMID_HLOS;
+		next[perms].perm = QCOM_SCM_PERM_RWX;
+		perms++;
+	}
+
+	if (remote) {
+		next[perms].vmid = QCOM_SCM_VMID_MSS_MSA;
+		next[perms].perm = QCOM_SCM_PERM_RW;
+		perms++;
+	}
 
 	return qcom_scm_assign_mem(addr, ALIGN(size, SZ_4K),
-				   current_perm, &next, 1);
+				   current_perm, next, perms);
 }
 
 static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
@@ -681,7 +687,7 @@  static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 
 	/* Hypervisor mapping to access metadata by modem */
 	mdata_perm = BIT(QCOM_SCM_VMID_HLOS);
-	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, phys, size);
+	ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, true, phys, size);
 	if (ret) {
 		dev_err(qproc->dev,
 			"assigning Q6 access to metadata failed: %d\n", ret);
@@ -699,7 +705,7 @@  static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
 		dev_err(qproc->dev, "MPSS header authentication failed: %d\n", ret);
 
 	/* Metadata authentication done, remove modem access */
-	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, false, phys, size);
+	xferop_ret = q6v5_xfer_mem_ownership(qproc, &mdata_perm, true, false, phys, size);
 	if (xferop_ret)
 		dev_warn(qproc->dev,
 			 "mdt buffer not reclaimed system may become unstable\n");
@@ -786,7 +792,7 @@  static int q6v5_mba_load(struct q6v5 *qproc)
 	}
 
 	/* Assign MBA image access in DDR to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false, true,
 				      qproc->mba_phys, qproc->mba_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -820,8 +826,8 @@  static int q6v5_mba_load(struct q6v5 *qproc)
 	q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
 
 reclaim_mba:
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret) {
 		dev_err(qproc->dev,
@@ -888,7 +894,7 @@  static void q6v5_mba_reclaim(struct q6v5 *qproc)
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
 	 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true, false,
 				      qproc->mba_phys,
 				      qproc->mba_size);
 	WARN_ON(ret);
@@ -915,6 +921,7 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 	phys_addr_t boot_addr;
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	phys_addr_t max_addr = 0;
+	u32 code_length;
 	bool relocate = false;
 	char *fw_name;
 	size_t fw_name_len;
@@ -965,9 +972,19 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 	}
 
 	/* Try to reset ownership back to Linux */
-	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
+	q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
 				qproc->mpss_phys, qproc->mpss_size);
 
+	/* Share ownership between Linux and MSS, during segment loading */
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, true,
+				      qproc->mpss_phys, qproc->mpss_size);
+	if (ret) {
+		dev_err(qproc->dev,
+			"assigning Q6 access to mpss memory failed: %d\n", ret);
+		ret = -EAGAIN;
+		goto release_firmware;
+	}
+
 	mpss_reloc = relocate ? min_addr : qproc->mpss_phys;
 	qproc->mpss_reloc = mpss_reloc;
 	/* Load firmware segments */
@@ -1016,10 +1033,24 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 			       phdr->p_memsz - phdr->p_filesz);
 		}
 		size += phdr->p_memsz;
+
+		code_length = readl(qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+		if (!code_length) {
+			boot_addr = relocate ? qproc->mpss_phys : min_addr;
+			writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
+			writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
+		}
+		writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
+
+		ret = readl(qproc->rmb_base + RMB_MBA_STATUS_REG);
+		if (ret < 0) {
+			dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
+			goto release_firmware;
+		}
 	}
 
 	/* Transfer ownership of modem ddr region to q6 */
-	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true,
+	ret = q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false, true,
 				      qproc->mpss_phys, qproc->mpss_size);
 	if (ret) {
 		dev_err(qproc->dev,
@@ -1028,11 +1059,6 @@  static int q6v5_mpss_load(struct q6v5 *qproc)
 		goto release_firmware;
 	}
 
-	boot_addr = relocate ? qproc->mpss_phys : min_addr;
-	writel(boot_addr, qproc->rmb_base + RMB_PMI_CODE_START_REG);
-	writel(RMB_CMD_LOAD_READY, qproc->rmb_base + RMB_MBA_COMMAND_REG);
-	writel(size, qproc->rmb_base + RMB_PMI_CODE_LENGTH_REG);
-
 	ret = q6v5_rmb_mba_wait(qproc, RMB_MBA_AUTH_COMPLETE, 10000);
 	if (ret == -ETIMEDOUT)
 		dev_err(qproc->dev, "MPSS authentication timed out\n");
@@ -1061,7 +1087,7 @@  static void qcom_q6v5_dump_segment(struct rproc *rproc,
 		ret = q6v5_mba_load(qproc);
 
 		/* Try to reset ownership back to Linux */
-		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, false,
+		q6v5_xfer_mem_ownership(qproc, &qproc->mpss_perm, true, false,
 					qproc->mpss_phys, qproc->mpss_size);
 	}
 
@@ -1101,8 +1127,8 @@  static int q6v5_start(struct rproc *rproc)
 		goto reclaim_mpss;
 	}
 
-	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, false,
-						qproc->mba_phys,
+	xfermemop_ret = q6v5_xfer_mem_ownership(qproc, &qproc->mba_perm, true,
+						false, qproc->mba_phys,
 						qproc->mba_size);
 	if (xfermemop_ret)
 		dev_err(qproc->dev,