[PATCHv1,1/5] ASoC: da7213: Add regulator support
diff mbox series

Message ID 20191108174843.11227-2-sebastian.reichel@collabora.com
State New
Headers show
Series
  • ASoC: da7213: support for usage with simple-card
Related show

Commit Message

Sebastian Reichel Nov. 8, 2019, 5:48 p.m. UTC
This adds support for most regulators of da7212 for improved
power management. The only thing skipped was the speaker supply,
which has some undocumented dependencies. It's supposed to be
either always-enabled or always-disabled.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../devicetree/bindings/sound/da7213.txt      |  4 ++
 sound/soc/codecs/da7213.c                     | 72 +++++++++++++++++++
 sound/soc/codecs/da7213.h                     |  2 +
 3 files changed, 78 insertions(+)

Comments

Adam Thomson Nov. 11, 2019, 2:07 p.m. UTC | #1
On 08 November 2019 17:49, Sebastian Reichel wrote:

> This adds support for most regulators of da7212 for improved
> power management. The only thing skipped was the speaker supply,
> which has some undocumented dependencies. It's supposed to be
> either always-enabled or always-disabled.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../devicetree/bindings/sound/da7213.txt      |  4 ++
>  sound/soc/codecs/da7213.c                     | 72 +++++++++++++++++++
>  sound/soc/codecs/da7213.h                     |  2 +
>  3 files changed, 78 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/da7213.txt
> b/Documentation/devicetree/bindings/sound/da7213.txt
> index 759bb04e0283..cc8200b7d748 100644
> --- a/Documentation/devicetree/bindings/sound/da7213.txt
> +++ b/Documentation/devicetree/bindings/sound/da7213.txt
> @@ -21,6 +21,10 @@ Optional properties:
>  - dlg,dmic-clkrate : DMIC clock frequency (Hz).
>  	[<1500000>, <3000000>]
> 
> + - VDDA-supply : Regulator phandle for Analogue power supply
> + - VDDMIC-supply : Regulator phandle for Mic Bias
> + - VDDIO-supply : Regulator phandle for I/O power supply
> +
>  ======
> 
>  Example:
> diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
> index aff306bb58df..36e5a7c9ac33 100644
> --- a/sound/soc/codecs/da7213.c
> +++ b/sound/soc/codecs/da7213.c
> @@ -19,6 +19,7 @@
>  #include <linux/module.h>
>  #include <sound/pcm.h>
>  #include <sound/pcm_params.h>
> +#include <linux/pm_runtime.h>
>  #include <sound/soc.h>
>  #include <sound/initval.h>
>  #include <sound/tlv.h>
> @@ -806,6 +807,12 @@ static int da7213_dai_event(struct
> snd_soc_dapm_widget *w,
>   */
> 
>  static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
> +	/*
> +	 * Power Supply
> +	 */
> +	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDA", 0, 0),

Having spoken with our HW team, this will cause a POR in the device so we can't
just enable/disable VDD_A supply. Needs to present at all times. How are you
verifying this?

> +	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDMIC", 0, 0),
> +
>  	/*
>  	 * Input & Output
>  	 */
> @@ -931,7 +938,16 @@ static const struct snd_soc_dapm_widget
> da7213_dapm_widgets[] = {
>  static const struct snd_soc_dapm_route da7213_audio_map[] = {
>  	/* Dest       Connecting Widget    source */
> 
> +	/* Main Power Supply */
> +	{"DAC Left", NULL, "VDDA"},
> +	{"DAC Right", NULL, "VDDA"},
> +	{"ADC Left", NULL, "VDDA"},
> +	{"ADC Right", NULL, "VDDA"},
> +
>  	/* Input path */
> +	{"Mic Bias 1", NULL, "VDDMIC"},
> +	{"Mic Bias 2", NULL, "VDDMIC"},
> +
>  	{"MIC1", NULL, "Mic Bias 1"},
>  	{"MIC2", NULL, "Mic Bias 2"},
> 
> @@ -1691,6 +1707,8 @@ static int da7213_probe(struct snd_soc_component
> *component)
>  {
>  	struct da7213_priv *da7213 =
> snd_soc_component_get_drvdata(component);
> 
> +	pm_runtime_get_sync(component->dev);
> +
>  	/* Default to using ALC auto offset calibration mode. */
>  	snd_soc_component_update_bits(component, DA7213_ALC_CTRL1,
>  			    DA7213_ALC_CALIB_MODE_MAN, 0);
> @@ -1811,6 +1829,8 @@ static int da7213_probe(struct snd_soc_component
> *component)
>  				    DA7213_DMIC_CLK_RATE_MASK, dmic_cfg);
>  	}
> 
> +	pm_runtime_put_sync(component->dev);
> +
>  	/* Check if MCLK provided */
>  	da7213->mclk = devm_clk_get(component->dev, "mclk");
>  	if (IS_ERR(da7213->mclk)) {
> @@ -1848,6 +1868,12 @@ static const struct regmap_config
> da7213_regmap_config = {
>  	.cache_type = REGCACHE_RBTREE,
>  };
> 
> +static void da7213_power_off(void *data)
> +{
> +	struct da7213_priv *da7213 = data;
> +	regulator_disable(da7213->vddio);
> +}
> +
>  static int da7213_i2c_probe(struct i2c_client *i2c,
>  			    const struct i2c_device_id *id)
>  {
> @@ -1860,6 +1886,18 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
> 
>  	i2c_set_clientdata(i2c, da7213);
> 
> +	da7213->vddio = devm_regulator_get(&i2c->dev, "VDDIO");
> +	if (IS_ERR(da7213->vddio))
> +		return PTR_ERR(da7213->vddio);
> +
> +	ret = regulator_enable(da7213->vddio);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(&i2c->dev, da7213_power_off,
> da7213);
> +	if (ret < 0)
> +		return ret;

We're seemingly leaving the VDDIO regulator enabled on failure, unless I'm
missing some magic somewhere?

> +
>  	da7213->regmap = devm_regmap_init_i2c(i2c, &da7213_regmap_config);
>  	if (IS_ERR(da7213->regmap)) {
>  		ret = PTR_ERR(da7213->regmap);
> @@ -1867,6 +1905,11 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
>  		return ret;
>  	}
> 
> +	pm_runtime_set_autosuspend_delay(&i2c->dev, 100);
> +	pm_runtime_use_autosuspend(&i2c->dev);
> +	pm_runtime_set_active(&i2c->dev);
> +	pm_runtime_enable(&i2c->dev);
> +
>  	ret = devm_snd_soc_register_component(&i2c->dev,
>  			&soc_component_dev_da7213, &da7213_dai, 1);
>  	if (ret < 0) {
> @@ -1876,6 +1919,34 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
>  	return ret;
>  }
> 
> +static int __maybe_unused da7213_runtime_suspend(struct device *dev)
> +{
> +	struct da7213_priv *da7213 = dev_get_drvdata(dev);
> +
> +	regcache_cache_only(da7213->regmap, true);
> +	regcache_mark_dirty(da7213->regmap);
> +	regulator_disable(da7213->vddio);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused da7213_runtime_resume(struct device *dev)
> +{
> +	struct da7213_priv *da7213 = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = regulator_enable(da7213->vddio);
> +	if (ret < 0)
> +		return ret;
> +	regcache_cache_only(da7213->regmap, false);
> +	regcache_sync(da7213->regmap);
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops da7213_pm = {
> +	SET_RUNTIME_PM_OPS(da7213_runtime_suspend,
> da7213_runtime_resume, NULL)
> +};
> +
>  static const struct i2c_device_id da7213_i2c_id[] = {
>  	{ "da7213", 0 },
>  	{ }
> @@ -1888,6 +1959,7 @@ static struct i2c_driver da7213_i2c_driver = {
>  		.name = "da7213",
>  		.of_match_table = of_match_ptr(da7213_of_match),
>  		.acpi_match_table = ACPI_PTR(da7213_acpi_match),
> +		.pm = &da7213_pm,
>  	},
>  	.probe		= da7213_i2c_probe,
>  	.id_table	= da7213_i2c_id,
> diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
> index 3250a3821fcc..97a250ea39e6 100644
> --- a/sound/soc/codecs/da7213.h
> +++ b/sound/soc/codecs/da7213.h
> @@ -12,6 +12,7 @@
> 
>  #include <linux/clk.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include <sound/da7213.h>
> 
>  /*
> @@ -524,6 +525,7 @@ enum da7213_sys_clk {
>  /* Codec private data */
>  struct da7213_priv {
>  	struct regmap *regmap;
> +	struct regulator *vddio;
>  	struct clk *mclk;
>  	unsigned int mclk_rate;
>  	int clk_src;
> --
> 2.24.0.rc1
Sebastian Reichel Nov. 12, 2019, 3:24 p.m. UTC | #2
Hi,

On Mon, Nov 11, 2019 at 02:07:46PM +0000, Adam Thomson wrote:
> On 08 November 2019 17:49, Sebastian Reichel wrote:
> 
> > This adds support for most regulators of da7212 for improved
> > power management. The only thing skipped was the speaker supply,
> > which has some undocumented dependencies. It's supposed to be
> > either always-enabled or always-disabled.
> > 
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> > ---
> >  .../devicetree/bindings/sound/da7213.txt      |  4 ++
> >  sound/soc/codecs/da7213.c                     | 72 +++++++++++++++++++
> >  sound/soc/codecs/da7213.h                     |  2 +
> >  3 files changed, 78 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/da7213.txt
> > b/Documentation/devicetree/bindings/sound/da7213.txt
> > index 759bb04e0283..cc8200b7d748 100644
> > --- a/Documentation/devicetree/bindings/sound/da7213.txt
> > +++ b/Documentation/devicetree/bindings/sound/da7213.txt
> > @@ -21,6 +21,10 @@ Optional properties:
> >  - dlg,dmic-clkrate : DMIC clock frequency (Hz).
> >  	[<1500000>, <3000000>]
> > 
> > + - VDDA-supply : Regulator phandle for Analogue power supply
> > + - VDDMIC-supply : Regulator phandle for Mic Bias
> > + - VDDIO-supply : Regulator phandle for I/O power supply
> > +
> >  ======
> > 
> >  Example:
> > diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
> > index aff306bb58df..36e5a7c9ac33 100644
> > --- a/sound/soc/codecs/da7213.c
> > +++ b/sound/soc/codecs/da7213.c
> > @@ -19,6 +19,7 @@
> >  #include <linux/module.h>
> >  #include <sound/pcm.h>
> >  #include <sound/pcm_params.h>
> > +#include <linux/pm_runtime.h>
> >  #include <sound/soc.h>
> >  #include <sound/initval.h>
> >  #include <sound/tlv.h>
> > @@ -806,6 +807,12 @@ static int da7213_dai_event(struct
> > snd_soc_dapm_widget *w,
> >   */
> > 
> >  static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
> > +	/*
> > +	 * Power Supply
> > +	 */
> > +	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDA", 0, 0),
> 
> Having spoken with our HW team, this will cause a POR in the device so we can't
> just enable/disable VDD_A supply. Needs to present at all times. How are you
> verifying this?

Ok. The system, that I used for testing shared a regulator
for VDDIO and VDDA. I suppose this needs to be moved next
to enabling VDDIO then.

> > +	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDMIC", 0, 0),
> > +
> >  	/*
> >  	 * Input & Output
> >  	 */
> > @@ -931,7 +938,16 @@ static const struct snd_soc_dapm_widget
> > da7213_dapm_widgets[] = {
> >  static const struct snd_soc_dapm_route da7213_audio_map[] = {
> >  	/* Dest       Connecting Widget    source */
> > 
> > +	/* Main Power Supply */
> > +	{"DAC Left", NULL, "VDDA"},
> > +	{"DAC Right", NULL, "VDDA"},
> > +	{"ADC Left", NULL, "VDDA"},
> > +	{"ADC Right", NULL, "VDDA"},
> > +
> >  	/* Input path */
> > +	{"Mic Bias 1", NULL, "VDDMIC"},
> > +	{"Mic Bias 2", NULL, "VDDMIC"},
> > +
> >  	{"MIC1", NULL, "Mic Bias 1"},
> >  	{"MIC2", NULL, "Mic Bias 2"},
> > 
> > @@ -1691,6 +1707,8 @@ static int da7213_probe(struct snd_soc_component
> > *component)
> >  {
> >  	struct da7213_priv *da7213 =
> > snd_soc_component_get_drvdata(component);
> > 
> > +	pm_runtime_get_sync(component->dev);
> > +
> >  	/* Default to using ALC auto offset calibration mode. */
> >  	snd_soc_component_update_bits(component, DA7213_ALC_CTRL1,
> >  			    DA7213_ALC_CALIB_MODE_MAN, 0);
> > @@ -1811,6 +1829,8 @@ static int da7213_probe(struct snd_soc_component
> > *component)
> >  				    DA7213_DMIC_CLK_RATE_MASK, dmic_cfg);
> >  	}
> > 
> > +	pm_runtime_put_sync(component->dev);
> > +
> >  	/* Check if MCLK provided */
> >  	da7213->mclk = devm_clk_get(component->dev, "mclk");
> >  	if (IS_ERR(da7213->mclk)) {
> > @@ -1848,6 +1868,12 @@ static const struct regmap_config
> > da7213_regmap_config = {
> >  	.cache_type = REGCACHE_RBTREE,
> >  };
> > 
> > +static void da7213_power_off(void *data)
> > +{
> > +	struct da7213_priv *da7213 = data;
> > +	regulator_disable(da7213->vddio);
> > +}
> > +
> >  static int da7213_i2c_probe(struct i2c_client *i2c,
> >  			    const struct i2c_device_id *id)
> >  {
> > @@ -1860,6 +1886,18 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
> > 
> >  	i2c_set_clientdata(i2c, da7213);
> > 
> > +	da7213->vddio = devm_regulator_get(&i2c->dev, "VDDIO");
> > +	if (IS_ERR(da7213->vddio))
> > +		return PTR_ERR(da7213->vddio);
> > +
> > +	ret = regulator_enable(da7213->vddio);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	ret = devm_add_action_or_reset(&i2c->dev, da7213_power_off,
> > da7213);
> > +	if (ret < 0)
> > +		return ret;
> 
> We're seemingly leaving the VDDIO regulator enabled on failure, unless I'm
> missing some magic somewhere?

If regulator_enable fails, the regulator is not enabled. If devm_add_action_or_reset
fails, it will call da7213_power_off().

> >  	da7213->regmap = devm_regmap_init_i2c(i2c, &da7213_regmap_config);
> >  	if (IS_ERR(da7213->regmap)) {
> >  		ret = PTR_ERR(da7213->regmap);
> > @@ -1867,6 +1905,11 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
> >  		return ret;
> >  	}
> > 
> > +	pm_runtime_set_autosuspend_delay(&i2c->dev, 100);
> > +	pm_runtime_use_autosuspend(&i2c->dev);
> > +	pm_runtime_set_active(&i2c->dev);
> > +	pm_runtime_enable(&i2c->dev);
> > +
> >  	ret = devm_snd_soc_register_component(&i2c->dev,
> >  			&soc_component_dev_da7213, &da7213_dai, 1);
> >  	if (ret < 0) {
> > @@ -1876,6 +1919,34 @@ static int da7213_i2c_probe(struct i2c_client *i2c,
> >  	return ret;
> >  }
> > 
> > +static int __maybe_unused da7213_runtime_suspend(struct device *dev)
> > +{
> > +	struct da7213_priv *da7213 = dev_get_drvdata(dev);
> > +
> > +	regcache_cache_only(da7213->regmap, true);
> > +	regcache_mark_dirty(da7213->regmap);
> > +	regulator_disable(da7213->vddio);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused da7213_runtime_resume(struct device *dev)
> > +{
> > +	struct da7213_priv *da7213 = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	ret = regulator_enable(da7213->vddio);
> > +	if (ret < 0)
> > +		return ret;
> > +	regcache_cache_only(da7213->regmap, false);
> > +	regcache_sync(da7213->regmap);
> > +	return 0;
> > +}
> > +
> > +static const struct dev_pm_ops da7213_pm = {
> > +	SET_RUNTIME_PM_OPS(da7213_runtime_suspend,
> > da7213_runtime_resume, NULL)
> > +};
> > +
> >  static const struct i2c_device_id da7213_i2c_id[] = {
> >  	{ "da7213", 0 },
> >  	{ }
> > @@ -1888,6 +1959,7 @@ static struct i2c_driver da7213_i2c_driver = {
> >  		.name = "da7213",
> >  		.of_match_table = of_match_ptr(da7213_of_match),
> >  		.acpi_match_table = ACPI_PTR(da7213_acpi_match),
> > +		.pm = &da7213_pm,
> >  	},
> >  	.probe		= da7213_i2c_probe,
> >  	.id_table	= da7213_i2c_id,
> > diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
> > index 3250a3821fcc..97a250ea39e6 100644
> > --- a/sound/soc/codecs/da7213.h
> > +++ b/sound/soc/codecs/da7213.h
> > @@ -12,6 +12,7 @@
> > 
> >  #include <linux/clk.h>
> >  #include <linux/regmap.h>
> > +#include <linux/regulator/consumer.h>
> >  #include <sound/da7213.h>
> > 
> >  /*
> > @@ -524,6 +525,7 @@ enum da7213_sys_clk {
> >  /* Codec private data */
> >  struct da7213_priv {
> >  	struct regmap *regmap;
> > +	struct regulator *vddio;
> >  	struct clk *mclk;
> >  	unsigned int mclk_rate;
> >  	int clk_src;

-- Sebastian
Mark Brown Nov. 12, 2019, 4:58 p.m. UTC | #3
On Tue, Nov 12, 2019 at 04:24:11PM +0100, Sebastian Reichel wrote:
> On Mon, Nov 11, 2019 at 02:07:46PM +0000, Adam Thomson wrote:

> > Having spoken with our HW team, this will cause a POR in the device so we can't
> > just enable/disable VDD_A supply. Needs to present at all times. How are you
> > verifying this?

> Ok. The system, that I used for testing shared a regulator
> for VDDIO and VDDA. I suppose this needs to be moved next
> to enabling VDDIO then.

regulator_bulk_enable() might be handy here.
Adam Thomson Nov. 13, 2019, 10:51 a.m. UTC | #4
On 12 November 2019 15:24, Sebastian Reichel wrote:

> > >  static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
> > > +	/*
> > > +	 * Power Supply
> > > +	 */
> > > +	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDA", 0, 0),
> >
> > Having spoken with our HW team, this will cause a POR in the device so we can't
> > just enable/disable VDD_A supply. Needs to present at all times. How are you
> > verifying this?
> 
> Ok. The system, that I used for testing shared a regulator
> for VDDIO and VDDA. I suppose this needs to be moved next
> to enabling VDDIO then.

Yes, and as Mark mentioned you can use the bulk enable/disable calls.

> > > +	da7213->vddio = devm_regulator_get(&i2c->dev, "VDDIO");
> > > +	if (IS_ERR(da7213->vddio))
> > > +		return PTR_ERR(da7213->vddio);
> > > +
> > > +	ret = regulator_enable(da7213->vddio);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	ret = devm_add_action_or_reset(&i2c->dev, da7213_power_off,
> > > da7213);
> > > +	if (ret < 0)
> > > +		return ret;
> >
> > We're seemingly leaving the VDDIO regulator enabled on failure, unless I'm
> > missing some magic somewhere?
> 
> If regulator_enable fails, the regulator is not enabled. If
> devm_add_action_or_reset
> fails, it will call da7213_power_off().

Right, didn't spot that as haven't seen that used before. Nice :)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/sound/da7213.txt b/Documentation/devicetree/bindings/sound/da7213.txt
index 759bb04e0283..cc8200b7d748 100644
--- a/Documentation/devicetree/bindings/sound/da7213.txt
+++ b/Documentation/devicetree/bindings/sound/da7213.txt
@@ -21,6 +21,10 @@  Optional properties:
 - dlg,dmic-clkrate : DMIC clock frequency (Hz).
 	[<1500000>, <3000000>]
 
+ - VDDA-supply : Regulator phandle for Analogue power supply
+ - VDDMIC-supply : Regulator phandle for Mic Bias
+ - VDDIO-supply : Regulator phandle for I/O power supply
+
 ======
 
 Example:
diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c
index aff306bb58df..36e5a7c9ac33 100644
--- a/sound/soc/codecs/da7213.c
+++ b/sound/soc/codecs/da7213.c
@@ -19,6 +19,7 @@ 
 #include <linux/module.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
+#include <linux/pm_runtime.h>
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
@@ -806,6 +807,12 @@  static int da7213_dai_event(struct snd_soc_dapm_widget *w,
  */
 
 static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
+	/*
+	 * Power Supply
+	 */
+	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDA", 0, 0),
+	SND_SOC_DAPM_REGULATOR_SUPPLY("VDDMIC", 0, 0),
+
 	/*
 	 * Input & Output
 	 */
@@ -931,7 +938,16 @@  static const struct snd_soc_dapm_widget da7213_dapm_widgets[] = {
 static const struct snd_soc_dapm_route da7213_audio_map[] = {
 	/* Dest       Connecting Widget    source */
 
+	/* Main Power Supply */
+	{"DAC Left", NULL, "VDDA"},
+	{"DAC Right", NULL, "VDDA"},
+	{"ADC Left", NULL, "VDDA"},
+	{"ADC Right", NULL, "VDDA"},
+
 	/* Input path */
+	{"Mic Bias 1", NULL, "VDDMIC"},
+	{"Mic Bias 2", NULL, "VDDMIC"},
+
 	{"MIC1", NULL, "Mic Bias 1"},
 	{"MIC2", NULL, "Mic Bias 2"},
 
@@ -1691,6 +1707,8 @@  static int da7213_probe(struct snd_soc_component *component)
 {
 	struct da7213_priv *da7213 = snd_soc_component_get_drvdata(component);
 
+	pm_runtime_get_sync(component->dev);
+
 	/* Default to using ALC auto offset calibration mode. */
 	snd_soc_component_update_bits(component, DA7213_ALC_CTRL1,
 			    DA7213_ALC_CALIB_MODE_MAN, 0);
@@ -1811,6 +1829,8 @@  static int da7213_probe(struct snd_soc_component *component)
 				    DA7213_DMIC_CLK_RATE_MASK, dmic_cfg);
 	}
 
+	pm_runtime_put_sync(component->dev);
+
 	/* Check if MCLK provided */
 	da7213->mclk = devm_clk_get(component->dev, "mclk");
 	if (IS_ERR(da7213->mclk)) {
@@ -1848,6 +1868,12 @@  static const struct regmap_config da7213_regmap_config = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
+static void da7213_power_off(void *data)
+{
+	struct da7213_priv *da7213 = data;
+	regulator_disable(da7213->vddio);
+}
+
 static int da7213_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -1860,6 +1886,18 @@  static int da7213_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, da7213);
 
+	da7213->vddio = devm_regulator_get(&i2c->dev, "VDDIO");
+	if (IS_ERR(da7213->vddio))
+		return PTR_ERR(da7213->vddio);
+
+	ret = regulator_enable(da7213->vddio);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&i2c->dev, da7213_power_off, da7213);
+	if (ret < 0)
+		return ret;
+
 	da7213->regmap = devm_regmap_init_i2c(i2c, &da7213_regmap_config);
 	if (IS_ERR(da7213->regmap)) {
 		ret = PTR_ERR(da7213->regmap);
@@ -1867,6 +1905,11 @@  static int da7213_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	pm_runtime_set_autosuspend_delay(&i2c->dev, 100);
+	pm_runtime_use_autosuspend(&i2c->dev);
+	pm_runtime_set_active(&i2c->dev);
+	pm_runtime_enable(&i2c->dev);
+
 	ret = devm_snd_soc_register_component(&i2c->dev,
 			&soc_component_dev_da7213, &da7213_dai, 1);
 	if (ret < 0) {
@@ -1876,6 +1919,34 @@  static int da7213_i2c_probe(struct i2c_client *i2c,
 	return ret;
 }
 
+static int __maybe_unused da7213_runtime_suspend(struct device *dev)
+{
+	struct da7213_priv *da7213 = dev_get_drvdata(dev);
+
+	regcache_cache_only(da7213->regmap, true);
+	regcache_mark_dirty(da7213->regmap);
+	regulator_disable(da7213->vddio);
+
+	return 0;
+}
+
+static int __maybe_unused da7213_runtime_resume(struct device *dev)
+{
+	struct da7213_priv *da7213 = dev_get_drvdata(dev);
+	int ret;
+
+	ret = regulator_enable(da7213->vddio);
+	if (ret < 0)
+		return ret;
+	regcache_cache_only(da7213->regmap, false);
+	regcache_sync(da7213->regmap);
+	return 0;
+}
+
+static const struct dev_pm_ops da7213_pm = {
+	SET_RUNTIME_PM_OPS(da7213_runtime_suspend, da7213_runtime_resume, NULL)
+};
+
 static const struct i2c_device_id da7213_i2c_id[] = {
 	{ "da7213", 0 },
 	{ }
@@ -1888,6 +1959,7 @@  static struct i2c_driver da7213_i2c_driver = {
 		.name = "da7213",
 		.of_match_table = of_match_ptr(da7213_of_match),
 		.acpi_match_table = ACPI_PTR(da7213_acpi_match),
+		.pm = &da7213_pm,
 	},
 	.probe		= da7213_i2c_probe,
 	.id_table	= da7213_i2c_id,
diff --git a/sound/soc/codecs/da7213.h b/sound/soc/codecs/da7213.h
index 3250a3821fcc..97a250ea39e6 100644
--- a/sound/soc/codecs/da7213.h
+++ b/sound/soc/codecs/da7213.h
@@ -12,6 +12,7 @@ 
 
 #include <linux/clk.h>
 #include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
 #include <sound/da7213.h>
 
 /*
@@ -524,6 +525,7 @@  enum da7213_sys_clk {
 /* Codec private data */
 struct da7213_priv {
 	struct regmap *regmap;
+	struct regulator *vddio;
 	struct clk *mclk;
 	unsigned int mclk_rate;
 	int clk_src;