@@ -15,8 +15,10 @@ test_pull_autostash () {
git add new_file &&
git pull "$@" . copy &&
test_cmp_rev HEAD^ copy &&
- test "$(cat new_file)" = dirty &&
- test "$(cat file)" = "modified again"
+ echo dirty >expect &&
+ test_cmp expect new_file &&
+ echo "modified again" >expect &&
+ test_cmp expect file
}
test_pull_autostash_fail () {
@@ -110,9 +112,11 @@ test_expect_success 'test . as a remote' '
echo updated >file &&
git commit -a -m updated &&
git checkout copy &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
git pull &&
- test "$(cat file)" = updated &&
+ echo updated >expect &&
+ test_cmp expect file &&
git reflog -1 >reflog.actual &&
sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy &&
echo "OBJID HEAD@{0}: pull: Fast-forward" >reflog.expected &&
@@ -125,9 +129,11 @@ test_expect_success 'the default remote . should not break explicit pull' '
git commit -a -m modified &&
git checkout copy &&
git reset --hard HEAD^ &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
git pull . second &&
- test "$(cat file)" = modified &&
+ echo modified >expect &&
+ test_cmp expect file &&
git reflog -1 >reflog.actual &&
sed "s/^[0-9a-f][0-9a-f]*/OBJID/" reflog.actual >reflog.fuzzy &&
echo "OBJID HEAD@{0}: pull . second: Fast-forward" >reflog.expected &&
@@ -137,10 +143,12 @@ test_expect_success 'the default remote . should not break explicit pull' '
test_expect_success 'fail if wildcard spec does not match any refs' '
git checkout -b test copy^ &&
test_when_finished "git checkout -f copy && git branch -D test" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_must_fail git pull . "refs/nonexisting1/*:refs/nonexisting2/*" 2>err &&
test_i18ngrep "no candidates for merging" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'fail if no branches specified with non-default remote' '
@@ -148,11 +156,13 @@ test_expect_success 'fail if no branches specified with non-default remote' '
test_when_finished "git remote remove test_remote" &&
git checkout -b test copy^ &&
test_when_finished "git checkout -f copy && git branch -D test" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_config branch.test.remote origin &&
test_must_fail git pull test_remote 2>err &&
test_i18ngrep "specify a branch on the command line" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'fail if not on a branch' '
@@ -160,10 +170,12 @@ test_expect_success 'fail if not on a branch' '
test_when_finished "git remote remove origin" &&
git checkout HEAD^ &&
test_when_finished "git checkout -f copy" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_must_fail git pull 2>err &&
test_i18ngrep "not currently on a branch" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'fail if no configuration for current branch' '
@@ -172,10 +184,12 @@ test_expect_success 'fail if no configuration for current branch' '
git checkout -b test copy^ &&
test_when_finished "git checkout -f copy && git branch -D test" &&
test_config branch.test.remote test_remote &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_must_fail git pull 2>err &&
test_i18ngrep "no tracking information" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'pull --all: fail if no configuration for current branch' '
@@ -184,10 +198,12 @@ test_expect_success 'pull --all: fail if no configuration for current branch' '
git checkout -b test copy^ &&
test_when_finished "git checkout -f copy && git branch -D test" &&
test_config branch.test.remote test_remote &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_must_fail git pull --all 2>err &&
test_i18ngrep "There is no tracking information" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'fail if upstream branch does not exist' '
@@ -195,16 +211,19 @@ test_expect_success 'fail if upstream branch does not exist' '
test_when_finished "git checkout -f copy && git branch -D test" &&
test_config branch.test.remote . &&
test_config branch.test.merge refs/heads/nonexisting &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_must_fail git pull 2>err &&
test_i18ngrep "no such ref was fetched" err &&
- test "$(cat file)" = file
+ echo file >expect &&
+ test_cmp expect file
'
test_expect_success 'fail if the index has unresolved entries' '
git checkout -b third second^ &&
test_when_finished "git checkout -f copy && git branch -D third" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
test_commit modified2 file &&
git ls-files -u >unmerged &&
test_must_be_empty unmerged &&
@@ -226,21 +245,25 @@ test_expect_success 'fail if the index has unresolved entries' '
test_expect_success 'fast-forwards working tree if branch head is updated' '
git checkout -b third second^ &&
test_when_finished "git checkout -f copy && git branch -D third" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
git pull . second:third 2>err &&
test_i18ngrep "fetch updated the current branch head" err &&
- test "$(cat file)" = modified &&
+ echo modified >expect &&
+ test_cmp expect file &&
test_cmp_rev third second
'
test_expect_success 'fast-forward fails with conflicting work tree' '
git checkout -b third second^ &&
test_when_finished "git checkout -f copy && git branch -D third" &&
- test "$(cat file)" = file &&
+ echo file >expect &&
+ test_cmp expect file &&
echo conflict >file &&
test_must_fail git pull . second:third 2>err &&
test_i18ngrep "Cannot fast-forward your working tree" err &&
- test "$(cat file)" = conflict &&
+ echo conflict >expect &&
+ test_cmp expect file &&
test_cmp_rev third second
'
@@ -501,7 +524,8 @@ test_expect_success 'pull.rebase=interactive' '
test_set_editor "$TRASH_DIRECTORY/fake-editor" &&
test_when_finished "test_might_fail git rebase --abort" &&
test_must_fail git pull --rebase=interactive . copy &&
- test "I was here" = "$(cat fake.out)"
+ echo "I was here" >expect &&
+ test_cmp expect fake.out
'
test_expect_success 'pull --rebase=i' '
@@ -512,7 +536,8 @@ test_expect_success 'pull --rebase=i' '
test_set_editor "$TRASH_DIRECTORY/fake-editor" &&
test_when_finished "test_might_fail git rebase --abort" &&
test_must_fail git pull --rebase=i . copy &&
- test "I was here, too" = "$(cat fake.out)"
+ echo "I was here, too" >expect &&
+ test_cmp expect fake.out
'
test_expect_success 'pull.rebase=invalid fails' '
@@ -578,16 +603,20 @@ test_expect_success '--rebase with rebased upstream' '
git commit -m to-rebase file2 &&
git tag to-rebase-orig &&
git pull --rebase me copy &&
- test "conflicting modification" = "$(cat file)" &&
- test file = "$(cat file2)"
+ echo "conflicting modification" >expect &&
+ test_cmp expect file &&
+ echo file >expect &&
+ test_cmp expect file2
'
test_expect_success '--rebase -f with rebased upstream' '
test_when_finished "test_might_fail git rebase --abort" &&
git reset --hard to-rebase-orig &&
git pull --rebase -f me copy &&
- test "conflicting modification" = "$(cat file)" &&
- test file = "$(cat file2)"
+ echo "conflicting modification" >expect &&
+ test_cmp expect file &&
+ echo file >expect &&
+ test_cmp expect file2
'
test_expect_success '--rebase with rebased default upstream' '
@@ -595,8 +624,10 @@ test_expect_success '--rebase with rebased default upstream' '
git checkout --track -b to-rebase2 me/copy &&
git reset --hard to-rebase-orig &&
git pull --rebase &&
- test "conflicting modification" = "$(cat file)" &&
- test file = "$(cat file2)"
+ echo "conflicting modification" >expect &&
+ test_cmp expect file &&
+ echo file >expect &&
+ test_cmp expect file2
'
test_expect_success 'rebased upstream + fetch + pull --rebase' '
@@ -607,8 +638,10 @@ test_expect_success 'rebased upstream + fetch + pull --rebase' '
git reset --hard to-rebase-orig &&
git fetch &&
git pull --rebase &&
- test "conflicting modification" = "$(cat file)" &&
- test file = "$(cat file2)"
+ echo "conflicting modification" >expect &&
+ test_cmp expect file &&
+ echo file >expect &&
+ test_cmp expect file2
'
@@ -744,8 +777,10 @@ test_expect_success 'git pull --rebase does not reapply old patches' '
test_expect_success 'git pull --rebase against local branch' '
git checkout -b copy2 to-rebase-orig &&
git pull --rebase . to-rebase &&
- test "conflicting modification" = "$(cat file)" &&
- test file = "$(cat file2)"
+ echo "conflicting modification" >expect &&
+ test_cmp expect file &&
+ echo file >expect &&
+ test_cmp expect file2
'
test_done
We currently have many instances of `test <line> = $(cat <file>)` and `test $(cat <file>) = <line>`. In the case where this fails, it will be difficult for a developer to debug since the output will be masked. Replace these instances with invocations of test_cmp(). This change was done with the following GNU sed expressions: s/\(\s*\)test \([^=]*\)= "$(cat \([^)]*\))"/\1echo \2>expect \&\&\n\1test_cmp expect \3/ s/\(\s*\)test "$(cat \([^)]*\))" = \([^&]*\)\( &&\)\?$/\1echo \3 >expect \&\&\n\1test_cmp expect \2\4/ A future patch will clean up situations where we have multiple duplicate statements within a test case. This is done to keep this patch purely mechanical. Signed-off-by: Denton Liu <liu.denton@gmail.com> --- t/t5520-pull.sh | 105 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 70 insertions(+), 35 deletions(-)