[v4,2/3] ARM: dts: dra7: add vpe clkctrl node
diff mbox series

Message ID 20191112142657.22898-3-bparrot@ti.com
State New
Headers show
Series
  • ARM: dts: dra7: add vpe nodes
Related show

Commit Message

Benoit Parrot Nov. 12, 2019, 2:26 p.m. UTC
Add clkctrl nodes for VPE module.

Note that because of the current dts node name dependency for mapping to
clock domain, we must still use "vpe-clkctrl@" naming instead of generic
"clock@" naming for the node. And because of this, it's probably best to
apply the dts node addition together along with the other clock changes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

Comments

Tony Lindgren Nov. 12, 2019, 3:26 p.m. UTC | #1
* Benoit Parrot <bparrot@ti.com> [191112 14:24]:
> Add clkctrl nodes for VPE module.
> 
> Note that because of the current dts node name dependency for mapping to
> clock domain, we must still use "vpe-clkctrl@" naming instead of generic
> "clock@" naming for the node. And because of this, it's probably best to
> apply the dts node addition together along with the other clock changes.

Thanks looks good to me now. Yeah it's probably best to queue this one
along with the clock driver changes. I can then collect the dts related
driver dts change on top of a branch from Tero. So please feel free to
add this:

Acked-by: Tony Lindgren <tony@atomide.com>

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 93e1eb83bed9..d1c2406ec71c 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1591,10 +1591,10 @@ 
 
 	rtc_cm: rtc-cm@700 {
 		compatible = "ti,omap4-cm";
-		reg = <0x700 0x100>;
+		reg = <0x700 0x60>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <0 0x700 0x100>;
+		ranges = <0 0x700 0x60>;
 
 		rtc_clkctrl: rtc-clkctrl@20 {
 			compatible = "ti,clkctrl";
@@ -1603,6 +1603,20 @@ 
 		};
 	};
 
+	vpe_cm: vpe-cm@760 {
+		compatible = "ti,omap4-cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: vpe-clkctrl@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
 };
 
 &cm_core {