[v3,09/10] arm64: dts: k3-am65-main Add CAL node
diff mbox series

Message ID 20191112142753.22976-10-bparrot@ti.com
State New
Headers show
Series
  • ARM: dts: dra7: add cal nodes
Related show

Commit Message

Benoit Parrot Nov. 12, 2019, 2:27 p.m. UTC
Add CAL dtsi node for AM654 device. Including proper power-domains and
clock properties.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Tony Lindgren Nov. 12, 2019, 3:38 p.m. UTC | #1
* Benoit Parrot <bparrot@ti.com> [191112 14:25]:
> Add CAL dtsi node for AM654 device. Including proper power-domains and
> clock properties.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index 799c75fa7981..4c65ed445e8b 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -516,4 +516,27 @@
>  		dma-coherent;
>  		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
>  	};
> +
> +	cal: cal@6f03000 {
> +		compatible = "ti,am654-cal";
> +		reg = <0x0 0x06f03000 0x0 0x400>,
> +		      <0x0 0x06f03800 0x0 0x40>;
> +		reg-names = "cal_top",
> +			    "cal_rx_core0";
> +		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
> +		ti,camerrx-control = <&scm_conf 0x40c0>;
> +		clock-names = "fck";
> +		clocks = <&k3_clks 2 0>;
> +		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
> +		status = "disabled";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			csi2_0: port@0 {
> +				reg = <0>;
> +			};
> +		};
> +	};
>  };

Here too just drop the status = "disabled" line. For reference, see commit
12afc0cf8121 ("ARM: dts: Drop pointless status changing for am3 musb")
in Linux next where we remove about 450 lines of pointless back and forth
noise from status = "disabled" to various board specific files setting
musb components back to status = "okay".

Regards,

Tony

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 799c75fa7981..4c65ed445e8b 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -516,4 +516,27 @@ 
 		dma-coherent;
 		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
 	};
+
+	cal: cal@6f03000 {
+		compatible = "ti,am654-cal";
+		reg = <0x0 0x06f03000 0x0 0x400>,
+		      <0x0 0x06f03800 0x0 0x40>;
+		reg-names = "cal_top",
+			    "cal_rx_core0";
+		interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+		ti,camerrx-control = <&scm_conf 0x40c0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 2 0>;
+		power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+			};
+		};
+	};
 };