[RESEND,v3,02/20] dt-bindings: media: cal: update binding example
diff mbox series

Message ID 20191112145347.23519-3-bparrot@ti.com
State New
Headers show
Series
  • media: ti-vpe: cal: maintenance
Related show

Commit Message

Benoit Parrot Nov. 12, 2019, 2:53 p.m. UTC
Update binding example to show proper endpoint properties and linkage.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 .../devicetree/bindings/media/ti-cal.txt      | 31 ++++++++++---------
 1 file changed, 16 insertions(+), 15 deletions(-)

Comments

Rob Herring Nov. 18, 2019, 5:40 p.m. UTC | #1
On Tue, 12 Nov 2019 08:53:29 -0600, Benoit Parrot wrote:
> Update binding example to show proper endpoint properties and linkage.
> 
> Signed-off-by: Benoit Parrot <bparrot@ti.com>
> ---
>  .../devicetree/bindings/media/ti-cal.txt      | 31 ++++++++++---------
>  1 file changed, 16 insertions(+), 15 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
index 93096d924786..7e960cf26e23 100644
--- a/Documentation/devicetree/bindings/media/ti-cal.txt
+++ b/Documentation/devicetree/bindings/media/ti-cal.txt
@@ -27,7 +27,6 @@  Documentation/devicetree/bindings/media/video-interfaces.txt.
 Example:
 	cal: cal@4845b000 {
 		compatible = "ti,dra72-cal";
-		ti,hwmods = "cal";
 		reg = <0x4845B000 0x400>,
 		      <0x4845B800 0x40>,
 		      <0x4845B900 0x40>;
@@ -45,9 +44,10 @@  Example:
 
 			csi2_0: port@0 {
 				reg = <0>;
-				endpoint {
-					slave-mode;
-					remote-endpoint = <&ar0330_1>;
+				csi2_phy0: endpoint {
+					remote-endpoint = <&csi2_cam0>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
 				};
 			};
 			csi2_1: port@1 {
@@ -57,19 +57,20 @@  Example:
 	};
 
 	i2c5: i2c@4807c000 {
-		ar0330@10 {
-			compatible = "ti,ar0330";
-			reg = <0x10>;
+		clock-frequency = <400000>;
 
-			port {
-				#address-cells = <1>;
-				#size-cells = <0>;
+		camera-sensor@3c {
+			compatible = "ovti,ov5640";
+			reg = <0x3c>;
+
+			clocks = <&clk_fixed>;
+			clock-names = "xclk";
 
-				ar0330_1: endpoint {
-					reg = <0>;
-					clock-lanes = <1>;
-					data-lanes = <0 2 3 4>;
-					remote-endpoint = <&csi2_0>;
+			port {
+				csi2_cam0: endpoint {
+					remote-endpoint = <&csi2_phy0>;
+					clock-lanes = <0>;
+					data-lanes = <1 2>;
 				};
 			};
 		};