diff mbox series

[v9,1/4] dt-bindings: clock: Document external clocks for MSM8998 gcc

Message ID 1573591466-14296-1-git-send-email-jhugo@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series MSM8998 Multimedia Clock Controller | expand

Commit Message

Jeffrey Hugo Nov. 12, 2019, 8:44 p.m. UTC
The global clock controller on MSM8998 can consume a number of external
clocks.  Document them.

For 7180 and 8150, the hardware always exists, so no clocks are truly
optional.  Therefore, simplify the binding by removing the min/max
qualifiers to clocks.  Also, fixup an example so that dt_binding_check
passes.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
---
 .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 +++++++++++++++-------
 1 file changed, 33 insertions(+), 14 deletions(-)

Comments

Taniya Das Nov. 13, 2019, 11:20 a.m. UTC | #1
Hi Jeffrey,

On 11/13/2019 2:14 AM, Jeffrey Hugo wrote:
> The global clock controller on MSM8998 can consume a number of external
> clocks.  Document them.
> 
> For 7180 and 8150, the hardware always exists, so no clocks are truly
> optional.  Therefore, simplify the binding by removing the min/max
> qualifiers to clocks.  Also, fixup an example so that dt_binding_check
> passes.
> 
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
>   .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 +++++++++++++++-------
>   1 file changed, 33 insertions(+), 14 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> index e73a56f..2f3512b 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
> @@ -40,20 +40,38 @@ properties:
>          - qcom,gcc-sm8150
>   
>     clocks:
> -    minItems: 1
> -    maxItems: 3
> -    items:
> -      - description: Board XO source
> -      - description: Board active XO source
> -      - description: Sleep clock source
> +    oneOf:
> +      #qcom,gcc-sm8150
> +      #qcom,gcc-sc7180
> +      - items:
> +        - description: Board XO source
> +        - description: Board active XO source
> +        - description: Sleep clock source
> +      #qcom,gcc-msm8998
> +      - items:
> +        - description: Board XO source
> +        - description: USB 3.0 phy pipe clock
> +        - description: UFS phy rx symbol clock for pipe 0
> +        - description: UFS phy rx symbol clock for pipe 1
> +        - description: UFS phy tx symbol clock
> +        - description: PCIE phy pipe clock

Would it be possible to add an example for MSM8998?

>   
>     clock-names:
> -    minItems: 1
> -    maxItems: 3
> -    items:
> -      - const: bi_tcxo
> -      - const: bi_tcxo_ao
> -      - const: sleep_clk
> +    oneOf:
> +      #qcom,gcc-sm8150
> +      #qcom,gcc-sc7180
> +      - items:
> +        - const: bi_tcxo
> +        - const: bi_tcxo_ao
> +        - const: sleep_clk

Not required for SC7180.

> +      #qcom,gcc-msm8998
> +      - items:
> +        - const: xo
> +        - const: usb3_pipe
> +        - const: ufs_rx_symbol0
> +        - const: ufs_rx_symbol1
> +        - const: ufs_tx_symbol0
> +        - const: pcie0_pipe
>   
>     '#clock-cells':
>       const: 1
> @@ -118,6 +136,7 @@ else:
>         compatible:
>           contains:
>             enum:
> +            - qcom,gcc-msm8998
>               - qcom,gcc-sm8150
>               - qcom,gcc-sc7180
>     then:
> @@ -179,8 +198,8 @@ examples:
>       clock-controller@100000 {
>         compatible = "qcom,gcc-sc7180";
>         reg = <0x100000 0x1f0000>;
> -      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
> -      clock-names = "bi_tcxo", "bi_tcxo_ao";
> +      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
> +      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";

SC7180 does not require a sleep clock.

>         #clock-cells = <1>;
>         #reset-cells = <1>;
>         #power-domain-cells = <1>;
>
Jeffrey Hugo Nov. 13, 2019, 3:02 p.m. UTC | #2
On 11/13/2019 4:20 AM, Taniya Das wrote:
> Hi Jeffrey,
> 
> On 11/13/2019 2:14 AM, Jeffrey Hugo wrote:
>> The global clock controller on MSM8998 can consume a number of external
>> clocks.  Document them.
>>
>> For 7180 and 8150, the hardware always exists, so no clocks are truly
>> optional.  Therefore, simplify the binding by removing the min/max
>> qualifiers to clocks.  Also, fixup an example so that dt_binding_check
>> passes.
>>
>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>> ---
>>   .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 
>> +++++++++++++++-------
>>   1 file changed, 33 insertions(+), 14 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml 
>> b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
>> index e73a56f..2f3512b 100644
>> --- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
>> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
>> @@ -40,20 +40,38 @@ properties:
>>          - qcom,gcc-sm8150
>>     clocks:
>> -    minItems: 1
>> -    maxItems: 3
>> -    items:
>> -      - description: Board XO source
>> -      - description: Board active XO source
>> -      - description: Sleep clock source
>> +    oneOf:
>> +      #qcom,gcc-sm8150
>> +      #qcom,gcc-sc7180
>> +      - items:
>> +        - description: Board XO source
>> +        - description: Board active XO source
>> +        - description: Sleep clock source
>> +      #qcom,gcc-msm8998
>> +      - items:
>> +        - description: Board XO source
>> +        - description: USB 3.0 phy pipe clock
>> +        - description: UFS phy rx symbol clock for pipe 0
>> +        - description: UFS phy rx symbol clock for pipe 1
>> +        - description: UFS phy tx symbol clock
>> +        - description: PCIE phy pipe clock
> 
> Would it be possible to add an example for MSM8998?

It doesn't seem to be materially different that the existing examples, 
but sure, that's something that can be done.

> 
>>     clock-names:
>> -    minItems: 1
>> -    maxItems: 3
>> -    items:
>> -      - const: bi_tcxo
>> -      - const: bi_tcxo_ao
>> -      - const: sleep_clk
>> +    oneOf:
>> +      #qcom,gcc-sm8150
>> +      #qcom,gcc-sc7180
>> +      - items:
>> +        - const: bi_tcxo
>> +        - const: bi_tcxo_ao
>> +        - const: sleep_clk
> 
> Not required for SC7180.

How are you determining this?

Per the earlier discussion with Stephen, if the hardware exists, it 
should be represented in DT.  According to the documentation I see, the 
sleep clock is routed to the GCC on SC7180.  The driver is not required 
to make use of it.  Thus its required from the DT perspective.

> 
>> +      #qcom,gcc-msm8998
>> +      - items:
>> +        - const: xo
>> +        - const: usb3_pipe
>> +        - const: ufs_rx_symbol0
>> +        - const: ufs_rx_symbol1
>> +        - const: ufs_tx_symbol0
>> +        - const: pcie0_pipe
>>     '#clock-cells':
>>       const: 1
>> @@ -118,6 +136,7 @@ else:
>>         compatible:
>>           contains:
>>             enum:
>> +            - qcom,gcc-msm8998
>>               - qcom,gcc-sm8150
>>               - qcom,gcc-sc7180
>>     then:
>> @@ -179,8 +198,8 @@ examples:
>>       clock-controller@100000 {
>>         compatible = "qcom,gcc-sc7180";
>>         reg = <0x100000 0x1f0000>;
>> -      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
>> -      clock-names = "bi_tcxo", "bi_tcxo_ao";
>> +      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
>> +      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
> 
> SC7180 does not require a sleep clock.
> 
>>         #clock-cells = <1>;
>>         #reset-cells = <1>;
>>         #power-domain-cells = <1>;
>>
>
Rob Herring (Arm) Nov. 14, 2019, 5:58 p.m. UTC | #3
On Tue, Nov 12, 2019 at 01:44:26PM -0700, Jeffrey Hugo wrote:
> The global clock controller on MSM8998 can consume a number of external
> clocks.  Document them.
> 
> For 7180 and 8150, the hardware always exists, so no clocks are truly
> optional.  Therefore, simplify the binding by removing the min/max
> qualifiers to clocks.  Also, fixup an example so that dt_binding_check
> passes.
> 
> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
> ---
>  .../devicetree/bindings/clock/qcom,gcc.yaml        | 47 +++++++++++++++-------
>  1 file changed, 33 insertions(+), 14 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index e73a56f..2f3512b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -40,20 +40,38 @@  properties:
        - qcom,gcc-sm8150
 
   clocks:
-    minItems: 1
-    maxItems: 3
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
+    oneOf:
+      #qcom,gcc-sm8150
+      #qcom,gcc-sc7180
+      - items:
+        - description: Board XO source
+        - description: Board active XO source
+        - description: Sleep clock source
+      #qcom,gcc-msm8998
+      - items:
+        - description: Board XO source
+        - description: USB 3.0 phy pipe clock
+        - description: UFS phy rx symbol clock for pipe 0
+        - description: UFS phy rx symbol clock for pipe 1
+        - description: UFS phy tx symbol clock
+        - description: PCIE phy pipe clock
 
   clock-names:
-    minItems: 1
-    maxItems: 3
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
+    oneOf:
+      #qcom,gcc-sm8150
+      #qcom,gcc-sc7180
+      - items:
+        - const: bi_tcxo
+        - const: bi_tcxo_ao
+        - const: sleep_clk
+      #qcom,gcc-msm8998
+      - items:
+        - const: xo
+        - const: usb3_pipe
+        - const: ufs_rx_symbol0
+        - const: ufs_rx_symbol1
+        - const: ufs_tx_symbol0
+        - const: pcie0_pipe
 
   '#clock-cells':
     const: 1
@@ -118,6 +136,7 @@  else:
       compatible:
         contains:
           enum:
+            - qcom,gcc-msm8998
             - qcom,gcc-sm8150
             - qcom,gcc-sc7180
   then:
@@ -179,8 +198,8 @@  examples:
     clock-controller@100000 {
       compatible = "qcom,gcc-sc7180";
       reg = <0x100000 0x1f0000>;
-      clocks = <&rpmhcc 0>, <&rpmhcc 1>;
-      clock-names = "bi_tcxo", "bi_tcxo_ao";
+      clocks = <&rpmhcc 0>, <&rpmhcc 1>, <0>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;