[v6,3/3] arm64: dts: meson: a1: add pinctrl controller support
diff mbox series

Message ID 1573819429-6937-4-git-send-email-qianggui.song@amlogic.com
State Not Applicable
Headers show
Series
  • pinctrl: meson-a1: add pinctrl driver
Related show

Commit Message

Qianggui Song Nov. 15, 2019, 12:03 p.m. UTC
add peripheral pinctrl controller to a1 SoC

Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

Comments

Neil Armstrong Nov. 15, 2019, 12:53 p.m. UTC | #1
On 15/11/2019 13:03, Qianggui Song wrote:
> add peripheral pinctrl controller to a1 SoC
> 
> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> index 7210ad049d1d..0965259af869 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
> @@ -5,6 +5,7 @@
>  
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/gpio/meson-a1-gpio.h>
>  
>  / {
>  	compatible = "amlogic,a1";
> @@ -74,6 +75,23 @@
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
>  
> +			periphs_pinctrl: pinctrl@0400 {
> +				compatible = "amlogic,meson-a1-periphs-pinctrl";
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				gpio: bank@0400 {
> +					reg = <0x0 0x0400 0x0 0x003c>,
> +					      <0x0 0x0480 0x0 0x0118>;
> +					reg-names = "mux", "gpio";
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					gpio-ranges = <&periphs_pinctrl 0 0 62>;
> +				};
> +
> +			};
> +
>  			uart_AO: serial@1c00 {
>  				compatible = "amlogic,meson-gx-uart",
>  					     "amlogic,meson-ao-uart";
> 

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Kevin Hilman Dec. 9, 2019, 10:13 p.m. UTC | #2
Neil Armstrong <narmstrong@baylibre.com> writes:

> On 15/11/2019 13:03, Qianggui Song wrote:
>> add peripheral pinctrl controller to a1 SoC
>> 
>> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
>> ---
>>  arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 18 ++++++++++++++++++
>>  1 file changed, 18 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> index 7210ad049d1d..0965259af869 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
>> @@ -5,6 +5,7 @@
>>  
>>  #include <dt-bindings/interrupt-controller/irq.h>
>>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/meson-a1-gpio.h>
>>  
>>  / {
>>  	compatible = "amlogic,a1";
>> @@ -74,6 +75,23 @@
>>  			#size-cells = <2>;
>>  			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
>>  
>> +			periphs_pinctrl: pinctrl@0400 {
>> +				compatible = "amlogic,meson-a1-periphs-pinctrl";
>> +				#address-cells = <2>;
>> +				#size-cells = <2>;
>> +				ranges;
>> +
>> +				gpio: bank@0400 {
>> +					reg = <0x0 0x0400 0x0 0x003c>,
>> +					      <0x0 0x0480 0x0 0x0118>;
>> +					reg-names = "mux", "gpio";
>> +					gpio-controller;
>> +					#gpio-cells = <2>;
>> +					gpio-ranges = <&periphs_pinctrl 0 0 62>;
>> +				};
>> +
>> +			};
>> +
>>  			uart_AO: serial@1c00 {
>>  				compatible = "amlogic,meson-gx-uart",
>>  					     "amlogic,meson-ao-uart";
>> 
>
> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>

Queued for v5.6 with Neil's tag.

Kevin

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 7210ad049d1d..0965259af869 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -5,6 +5,7 @@ 
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -74,6 +75,23 @@ 
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";