[1/2] spi: mediatek: add SPI_CS_HIGH support

Commit Message

luhua xu Nov. 18, 2019, 4:57 a.m. UTC

Change to use SPI_CS_HIGH to support spi CS polarity setting
for chips support enhance_timing.

Signed-off-by: Luhua Xu <[e-mail]>
---
 drivers/spi/spi-mt65xx.c                 | 12 ++++++++++--
 include/linux/platform_data/spi-mt65xx.h |  1 -
 2 files changed, 10 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 6888a4d..f599cce 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -139,7 +139,6 @@  static const struct mtk_spi_compatible mt8183_compat = {
  * supplies it.
  */
 static const struct mtk_chip_config mtk_default_chip_info = {
-	.cs_pol = 0,
 	.sample_sel = 0,
 };
 
@@ -230,10 +229,12 @@  static int mtk_spi_prepare_message(struct spi_master *master,
 #endif
 
 	if (mdata->dev_comp->enhance_timing) {
-		if (chip_config->cs_pol)
+		/* set CS polarity */
+		if (spi->mode & SPI_CS_HIGH)
 			reg_val |= SPI_CMD_CS_POL;
 		else
 			reg_val &= ~SPI_CMD_CS_POL;
+
 		if (chip_config->sample_sel)
 			reg_val |= SPI_CMD_SAMPLE_SEL;
 		else
@@ -264,6 +265,9 @@  static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
 	u32 reg_val;
 	struct mtk_spi *mdata = spi_master_get_devdata(spi->master);
 
+	if (spi->mode & SPI_CS_HIGH)
+		enable = !enable;
+
 	reg_val = readl(mdata->base + SPI_CMD_REG);
 	if (!enable) {
 		reg_val |= SPI_CMD_PAUSE_EN;
@@ -647,6 +651,10 @@  static int mtk_spi_probe(struct platform_device *pdev)
 
 	mdata = spi_master_get_devdata(master);
 	mdata->dev_comp = of_id->data;
+
+	if (mdata->dev_comp->enhance_timing)
+		master->mode_bits |= SPI_CS_HIGH;
+
 	if (mdata->dev_comp->must_tx)
 		master->flags = SPI_MASTER_MUST_TX;
 
diff --git a/include/linux/platform_data/spi-mt65xx.h b/include/linux/platform_data/spi-mt65xx.h
index f0e6d64..65fd5ffd2 100644
--- a/include/linux/platform_data/spi-mt65xx.h
+++ b/include/linux/platform_data/spi-mt65xx.h
@@ -11,7 +11,6 @@ 
 
 /* Board specific platform_data */
 struct mtk_chip_config {
-	u32 cs_pol;
 	u32 sample_sel;
 };
 #endif