diff mbox series

[4/4] arm64: dts: meson-g12-common: add video decoder node

Message ID 20191120111430.29552-5-narmstrong@baylibre.com (mailing list archive)
State Superseded
Headers show
Series media: meson: vdec: add g12a platform | expand

Commit Message

Neil Armstrong Nov. 20, 2019, 11:14 a.m. UTC 
From: Maxime Jourdan <mjourdan@baylibre.com>

Add the video decoder node for the Amlogic G12A and compatible SoC.

Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

Comments

Kevin Hilman Dec. 13, 2019, 4:51 p.m. UTC | #1 
Neil Armstrong <narmstrong@baylibre.com> writes:

> From: Maxime Jourdan <mjourdan@baylibre.com>
>
> Add the video decoder node for the Amlogic G12A and compatible SoC.
>
> Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Queued for v5.6,

Kevin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 3f39e020f74e..6fe7dead5a92 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2152,6 +2152,29 @@ 
 			};
 		};
 
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
 		vpu: vpu@ff900000 {
 			compatible = "amlogic,meson-g12a-vpu";
 			reg = <0x0 0xff900000 0x0 0x100000>,