[2/5] arm64: dts: rockchip: Add VMARC RK3399Pro SOM initial support
diff mbox series

Message ID 20191120113923.11685-3-jagan@amarulasolutions.com
State New
Headers show
Series
  • arm64: dts: rockchip: Add Rock Pi N10 support
Related show

Commit Message

Jagan Teki Nov. 20, 2019, 11:39 a.m. UTC
VMARC RK3399Pro SOM is a standard SMARC SOM design with
Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Add initial support for VMARC RK3399Pro SOM, this would use
with associated carrier board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 339 ++++++++++++++++++
 1 file changed, 339 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi

Comments

Heiko Stübner Nov. 20, 2019, 1:28 p.m. UTC | #1
Hi Jagan,

looks good in general, just some small things below:

Am Mittwoch, 20. November 2019, 12:39:20 CET schrieb Jagan Teki:
> VMARC RK3399Pro SOM is a standard SMARC SOM design with
> Rockchip RK3399Pro SoC, which is designed by Vamrs.
> 
> Specification:
> - Rockchip RK3399Pro
> - PMIC: RK809-3
> - SD slot, 16GiB eMMC
> - 2xUSB-2.0, 1xUSB3.0
> - USB-C for power supply
> - Ethernet, PCIe
> - HDMI, MIPI-DSI/CSI, eDP
> 
> Add initial support for VMARC RK3399Pro SOM, this would use
> with associated carrier board.
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 339 ++++++++++++++++++
>  1 file changed, 339 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> new file mode 100644
> index 000000000000..ddf6ebc9fbe3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> @@ -0,0 +1,339 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
> + * Copyright (c) 2019 Vamrs Limited
> + * Copyright (c) 2019 Amarula Solutions(India)
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
> +
> +	clkin_gmac: external-gmac-clock {
> +		compatible = "fixed-clock";
> +		clock-frequency = <125000000>;
> +		clock-output-names = "clkin_gmac";
> +		#clock-cells = <0>;
> +	};
> +
> +	vcc5v0_sys: vcc5v0-sys-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;

Is vcc5v0_sys really the topmost regulator getting the outside
power-supply?


> +	};
> +
> +	vcc_lan: vcc3v3-phy-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_lan";

vcc_lan / vcc_phy is mostly coming from the vendor bsp in some way
and will be named differently in schematics ... also it should be connected
to the regulator tree.

[...]

> +&tsadc {
> +	status = "okay";
> +
> +	/* tshut mode 0:CRU 1:GPIO */

I think we can live without the additional comments for properties :-)

> +	rockchip,hw-tshut-mode = <1>;
> +	/* tshut polarity 0:LOW 1:HIGH */
> +	rockchip,hw-tshut-polarity = <1>;
> +};

Heiko
Jagan Teki Nov. 20, 2019, 3:51 p.m. UTC | #2
Hi Heiko,

On Wed, Nov 20, 2019 at 6:59 PM Heiko Stübner <heiko@sntech.de> wrote:
>
> Hi Jagan,
>
> looks good in general, just some small things below:
>
> Am Mittwoch, 20. November 2019, 12:39:20 CET schrieb Jagan Teki:
> > VMARC RK3399Pro SOM is a standard SMARC SOM design with
> > Rockchip RK3399Pro SoC, which is designed by Vamrs.
> >
> > Specification:
> > - Rockchip RK3399Pro
> > - PMIC: RK809-3
> > - SD slot, 16GiB eMMC
> > - 2xUSB-2.0, 1xUSB3.0
> > - USB-C for power supply
> > - Ethernet, PCIe
> > - HDMI, MIPI-DSI/CSI, eDP
> >
> > Add initial support for VMARC RK3399Pro SOM, this would use
> > with associated carrier board.
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> >  .../dts/rockchip/rk3399pro-vmarc-som.dtsi     | 339 ++++++++++++++++++
> >  1 file changed, 339 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> > new file mode 100644
> > index 000000000000..ddf6ebc9fbe3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> > @@ -0,0 +1,339 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
> > + * Copyright (c) 2019 Vamrs Limited
> > + * Copyright (c) 2019 Amarula Solutions(India)
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/rockchip.h>
> > +#include <dt-bindings/pwm/pwm.h>
> > +
> > +/ {
> > +     compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
> > +
> > +     clkin_gmac: external-gmac-clock {
> > +             compatible = "fixed-clock";
> > +             clock-frequency = <125000000>;
> > +             clock-output-names = "clkin_gmac";
> > +             #clock-cells = <0>;
> > +     };
> > +
> > +     vcc5v0_sys: vcc5v0-sys-regulator {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "vcc5v0_sys";
> > +             regulator-always-on;
> > +             regulator-boot-on;
> > +             regulator-min-microvolt = <5000000>;
> > +             regulator-max-microvolt = <5000000>;
>
> Is vcc5v0_sys really the topmost regulator getting the outside
> power-supply?

Thanks for pointing this, I forgot to check the vin supply in carrier
board schematics, yes it is VCC12V_DCIN (with 5V to 24V range) like
rock-pi-4. Will update the same.

>
>
> > +     };
> > +
> > +     vcc_lan: vcc3v3-phy-regulator {
> > +             compatible = "regulator-fixed";
> > +             regulator-name = "vcc_lan";
>
> vcc_lan / vcc_phy is mostly coming from the vendor bsp in some way
> and will be named differently in schematics ... also it should be connected
> to the regulator tree.

Infact bsp named this as vcc_phy, I got the vcc_lan from schematics[1]
page 16. Yes it is using VCCIO_3V3_S0 (SWOUT2 from regulator tree), I
will mark this regulator.

>
> [...]
>
> > +&tsadc {
> > +     status = "okay";
> > +
> > +     /* tshut mode 0:CRU 1:GPIO */
>
> I think we can live without the additional comments for properties :-)

True, I have reused it from rock-pi-4 thought that it would compatible
with old. will remove.

[1] https://dl.radxa.com/rockpin10/docs/hw/VMARC_RK3399Pro_sch_V1.1_20190619.pdf

Jagan.

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
new file mode 100644
index 000000000000..ddf6ebc9fbe3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -0,0 +1,339 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_lan: vcc3v3-phy-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_lan";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_l>;
+};
+
+&emmc_phy {
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_RMII_SRC>;
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_lan>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <180>;
+	i2c-scl-falling-time-ns = <30>;
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int_l>;
+		rockchip,system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc_buck5>;
+		vcc6-supply = <&vcc_buck5>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+
+		regulators {
+			vdd_log: DCDC_REG1 {
+				regulator-name = "vdd_log";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_cpu_l: DCDC_REG2 {
+				regulator-name = "vdd_cpu_l";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc3v3_sys: DCDC_REG4 {
+				regulator-name = "vcc3v3_sys";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_buck5: DCDC_REG5 {
+				regulator-name = "vcc_buck5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2200000>;
+				};
+			};
+
+			vcca_0v9: LDO_REG1 {
+				regulator-name = "vcca_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: LDO_REG2 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc_0v9: LDO_REG3 {
+				regulator-name = "vcc_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG4 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1850000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD05.
+			 */
+			vdd1v5_dvp: LDO_REG5 {
+				regulator-name = "vdd1v5_dvp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v5: LDO_REG6 {
+				regulator-name = "vcc_1v5";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_3v0: LDO_REG7 {
+				regulator-name = "vccio_3v0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG8 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/*
+			 * As per BSP, but schematic not showing any regulator
+			 * pin for LD09.
+			 */
+			vcc_sd: LDO_REG9 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc5v0_usb2: SWITCH_REG1 {
+				regulator-name = "vcc5v0_usb2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <5000000>;
+				};
+			};
+
+			vccio_3v3: SWITCH_REG2 {
+				regulator-name = "vccio_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&io_domains {
+	status = "okay";
+	bt656-supply = <&vcca_1v8>;
+	sdmmc-supply = <&vccio_sd>;
+	gpio1830-supply = <&vccio_3v0>;
+};
+
+&pmu_io_domains {
+	status = "okay";
+	pmu1830-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <1>;
+};
+
+&pinctrl {
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins =
+				<1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+};