@@ -8,7 +8,7 @@ The DPU display controller is found in SDM845 SoC.
MDSS:
Required properties:
-- compatible: "qcom,sdm845-mdss"
+- compatible: "qcom,sdm845-mdss", "qcom,sc7180-mdss"
- reg: physical base address and length of contoller's registers.
- reg-names: register region names. The following region is required:
* "mdss"
@@ -41,7 +41,7 @@ Optional properties:
MDP:
Required properties:
-- compatible: "qcom,sdm845-dpu"
+- compatible: "qcom,sdm845-dpu", "qcom,sc7180-dpu"
- reg: physical base address and length of controller's registers.
- reg-names : register region names. The following region is required:
* "mdp"
@@ -11,11 +11,17 @@
#include "dpu_hw_catalog_format.h"
#include "dpu_kms.h"
-#define VIG_SDM845_MASK \
- (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_SCALER_QSEED3) | BIT(DPU_SSPP_QOS) |\
+#define VIG_MASK \
+ (BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) |\
BIT(DPU_SSPP_CSC_10BIT) | BIT(DPU_SSPP_CDP) | BIT(DPU_SSPP_QOS_8LVL) |\
BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_EXCL_RECT))
+#define VIG_SDM845_MASK \
+ (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED3))
+
+#define VIG_SC7180_MASK \
+ (VIG_MASK | BIT(DPU_SSPP_SCALER_QSEED4))
+
#define DMA_SDM845_MASK \
(BIT(DPU_SSPP_SRC) | BIT(DPU_SSPP_QOS) | BIT(DPU_SSPP_QOS_8LVL) |\
BIT(DPU_SSPP_TS_PREFILL) | BIT(DPU_SSPP_TS_PREFILL_REC1) |\
@@ -27,6 +33,9 @@
#define MIXER_SDM845_MASK \
(BIT(DPU_MIXER_SOURCESPLIT) | BIT(DPU_DIM_LAYER))
+#define MIXER_SC7180_MASK \
+ (BIT(DPU_DIM_LAYER))
+
#define PINGPONG_SDM845_MASK BIT(DPU_PINGPONG_DITHER)
#define PINGPONG_SDM845_SPLIT_MASK \
@@ -60,6 +69,16 @@
.has_idle_pc = true,
};
+static const struct dpu_caps sc7180_dpu_caps = {
+ .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .max_mixer_blendstages = 0x9,
+ .qseed_type = DPU_SSPP_SCALER_QSEED4,
+ .smart_dma_rev = DPU_SSPP_SMART_DMA_V2,
+ .ubwc_version = DPU_HW_UBWC_VER_20,
+ .has_dim_layer = true,
+ .has_idle_pc = true,
+};
+
static struct dpu_mdp_cfg sdm845_mdp[] = {
{
.name = "top_0", .id = MDP_TOP,
@@ -85,6 +104,23 @@
},
};
+static struct dpu_mdp_cfg sc7180_mdp[] = {
+ {
+ .name = "top_0", .id = MDP_TOP,
+ .base = 0x0, .len = 0x494,
+ .features = 0,
+ .highest_bank_bit = 0x3,
+ .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
+ .reg_off = 0x2AC, .bit_off = 0},
+ .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
+ .reg_off = 0x2AC, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
+ .reg_off = 0x2B4, .bit_off = 8},
+ .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
+ .reg_off = 0x2BC, .bit_off = 8},
+ },
+};
+
/*************************************************************
* CTL sub blocks config
*************************************************************/
@@ -116,6 +152,24 @@
},
};
+static struct dpu_ctl_cfg sc7180_ctl[] = {
+ {
+ .name = "ctl_0", .id = CTL_0,
+ .base = 0x1000, .len = 0xE4,
+ .features = BIT(DPU_CTL_ACTIVE_CFG)
+ },
+ {
+ .name = "ctl_1", .id = CTL_1,
+ .base = 0x1200, .len = 0xE4,
+ .features = BIT(DPU_CTL_ACTIVE_CFG)
+ },
+ {
+ .name = "ctl_2", .id = CTL_2,
+ .base = 0x1400, .len = 0xE4,
+ .features = BIT(DPU_CTL_ACTIVE_CFG)
+ },
+};
+
/*************************************************************
* SSPP sub blocks config
*************************************************************/
@@ -203,9 +257,23 @@
sdm845_dma_sblk_3, 13, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR1),
};
+static struct dpu_sspp_cfg sc7180_sspp[] = {
+ SSPP_BLK("sspp_0", SSPP_VIG0, 0x4000, VIG_SC7180_MASK,
+ sdm845_vig_sblk_0, 0, SSPP_TYPE_VIG, DPU_CLK_CTRL_VIG0),
+ SSPP_BLK("sspp_8", SSPP_DMA0, 0x24000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_0, 1, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA0),
+ SSPP_BLK("sspp_9", SSPP_DMA1, 0x26000, DMA_SDM845_MASK,
+ sdm845_dma_sblk_1, 5, SSPP_TYPE_DMA, DPU_CLK_CTRL_DMA1),
+ SSPP_BLK("sspp_10", SSPP_DMA2, 0x28000, DMA_CURSOR_SDM845_MASK,
+ sdm845_dma_sblk_2, 9, SSPP_TYPE_DMA, DPU_CLK_CTRL_CURSOR0),
+};
+
/*************************************************************
* MIXER sub blocks config
*************************************************************/
+
+/* SDM845 */
+
static const struct dpu_lm_sub_blks sdm845_lm_sblk = {
.maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
.maxblendstages = 11, /* excluding base layer */
@@ -215,23 +283,46 @@
},
};
-#define LM_BLK(_name, _id, _base, _pp, _lmpair) \
+#define LM_BLK(_name, _id, _base, _fmask, _sblk, _pp, _lmpair) \
{ \
.name = _name, .id = _id, \
.base = _base, .len = 0x320, \
- .features = MIXER_SDM845_MASK, \
- .sblk = &sdm845_lm_sblk, \
+ .features = _fmask, \
+ .sblk = _sblk, \
.pingpong = _pp, \
.lm_pair_mask = (1 << _lmpair) \
}
static struct dpu_lm_cfg sdm845_lm[] = {
- LM_BLK("lm_0", LM_0, 0x44000, PINGPONG_0, LM_1),
- LM_BLK("lm_1", LM_1, 0x45000, PINGPONG_1, LM_0),
- LM_BLK("lm_2", LM_2, 0x46000, PINGPONG_2, LM_5),
- LM_BLK("lm_3", LM_3, 0x0, PINGPONG_MAX, 0),
- LM_BLK("lm_4", LM_4, 0x0, PINGPONG_MAX, 0),
- LM_BLK("lm_5", LM_5, 0x49000, PINGPONG_3, LM_2),
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_0, LM_1),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_1, LM_0),
+ LM_BLK("lm_2", LM_2, 0x46000, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_2, LM_5),
+ LM_BLK("lm_3", LM_3, 0x0, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_MAX, 0),
+ LM_BLK("lm_4", LM_4, 0x0, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_MAX, 0),
+ LM_BLK("lm_5", LM_5, 0x49000, MIXER_SDM845_MASK,
+ &sdm845_lm_sblk, PINGPONG_3, LM_2),
+};
+
+/* SC7180 */
+
+static const struct dpu_lm_sub_blks sc7180_lm_sblk = {
+ .maxwidth = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
+ .maxblendstages = 7, /* excluding base layer */
+ .blendstage_base = { /* offsets relative to mixer base */
+ 0x20, 0x38, 0x50, 0x68, 0x80, 0x98, 0xb0
+ },
+};
+
+static struct dpu_lm_cfg sc7180_lm[] = {
+ LM_BLK("lm_0", LM_0, 0x44000, MIXER_SC7180_MASK,
+ &sc7180_lm_sblk, PINGPONG_0, LM_1),
+ LM_BLK("lm_1", LM_1, 0x45000, MIXER_SC7180_MASK,
+ &sc7180_lm_sblk, PINGPONG_1, LM_0),
};
/*************************************************************
@@ -271,6 +362,11 @@
PP_BLK("pingpong_3", PINGPONG_3, 0x71800),
};
+static struct dpu_pingpong_cfg sc7180_pp[] = {
+ PP_BLK_TE("pingpong_0", PINGPONG_0, 0x70000),
+ PP_BLK_TE("pingpong_1", PINGPONG_1, 0x70800),
+};
+
/*************************************************************
* INTF sub blocks config
*************************************************************/
@@ -290,6 +386,11 @@
INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 1),
};
+static struct dpu_intf_cfg sc7180_intf[] = {
+ INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, 0),
+ INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0),
+};
+
/*************************************************************
* VBIF sub blocks config
*************************************************************/
@@ -340,6 +441,10 @@
{.fl = 0, .lut = 0x11222222223357}
};
+static struct dpu_qos_lut_entry sc7180_qos_linear[] = {
+ {.fl = 0, .lut = 0x0011222222335777},
+};
+
static struct dpu_qos_lut_entry sdm845_qos_macrotile[] = {
{.fl = 10, .lut = 0x344556677},
{.fl = 11, .lut = 0x3344556677},
@@ -349,10 +454,18 @@
{.fl = 0, .lut = 0x112233344556677},
};
+static struct dpu_qos_lut_entry sc7180_qos_macrotile[] = {
+ {.fl = 0, .lut = 0x0011223344556677},
+};
+
static struct dpu_qos_lut_entry sdm845_qos_nrt[] = {
{.fl = 0, .lut = 0x0},
};
+static struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
+ {.fl = 0, .lut = 0x0},
+};
+
static struct dpu_perf_cfg sdm845_perf_data = {
.max_bw_low = 6800000,
.max_bw_high = 6800000,
@@ -392,6 +505,30 @@
},
};
+static struct dpu_perf_cfg sc7180_perf_data = {
+ .max_bw_low = 3900000,
+ .max_bw_high = 5500000,
+ .min_core_ib = 2400000,
+ .min_llcc_ib = 800000,
+ .min_dram_ib = 800000,
+ .danger_lut_tbl = {0xff, 0xffff, 0x0},
+ .qos_lut_tbl = {
+ {.nentry = ARRAY_SIZE(sc7180_qos_linear),
+ .entries = sc7180_qos_linear
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_macrotile),
+ .entries = sc7180_qos_macrotile
+ },
+ {.nentry = ARRAY_SIZE(sc7180_qos_nrt),
+ .entries = sc7180_qos_nrt
+ },
+ },
+ .cdp_cfg = {
+ {.rd_enable = 1, .wr_enable = 1},
+ {.rd_enable = 1, .wr_enable = 0}
+ },
+};
+
/*************************************************************
* Hardware catalog init
*************************************************************/
@@ -425,9 +562,39 @@ static void sdm845_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
};
}
+/*
+ * sc7180_cfg_init(): populate sc7180 dpu sub-blocks reg offsets
+ * and instance counts.
+ */
+static void sc7180_cfg_init(struct dpu_mdss_cfg *dpu_cfg)
+{
+ *dpu_cfg = (struct dpu_mdss_cfg){
+ .caps = &sc7180_dpu_caps,
+ .mdp_count = ARRAY_SIZE(sc7180_mdp),
+ .mdp = sc7180_mdp,
+ .ctl_count = ARRAY_SIZE(sc7180_ctl),
+ .ctl = sc7180_ctl,
+ .sspp_count = ARRAY_SIZE(sc7180_sspp),
+ .sspp = sc7180_sspp,
+ .mixer_count = ARRAY_SIZE(sc7180_lm),
+ .mixer = sc7180_lm,
+ .pingpong_count = ARRAY_SIZE(sc7180_pp),
+ .pingpong = sc7180_pp,
+ .intf_count = ARRAY_SIZE(sc7180_intf),
+ .intf = sc7180_intf,
+ .vbif_count = ARRAY_SIZE(sdm845_vbif),
+ .vbif = sdm845_vbif,
+ .reg_dma_count = 1,
+ .dma_cfg = sdm845_regdma,
+ .perf = sc7180_perf_data,
+ .mdss_irqs = 0x3f,
+ };
+}
+
static struct dpu_mdss_hw_cfg_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_400, .cfg_init = sdm845_cfg_init},
{ .hw_rev = DPU_HW_VER_401, .cfg_init = sdm845_cfg_init},
+ { .hw_rev = DPU_HW_VER_620, .cfg_init = sc7180_cfg_init},
};
void dpu_hw_catalog_deinit(struct dpu_mdss_cfg *dpu_cfg)
@@ -38,6 +38,7 @@
#define DPU_HW_VER_401 DPU_HW_VER(4, 0, 1) /* sdm845 v2.0 */
#define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
#define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sdm855 v1.0 */
+#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
#define IS_MSM8996_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_170)
@@ -45,6 +46,7 @@
#define IS_SDM845_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_400)
#define IS_SDM670_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_410)
#define IS_SDM855_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_500)
+#define IS_SC7180_TARGET(rev) IS_DPU_MAJOR_MINOR_SAME((rev), DPU_HW_VER_620)
#define DPU_HW_BLK_NAME_LEN 16
@@ -110,6 +112,7 @@ enum {
DPU_SSPP_SRC = 0x1,
DPU_SSPP_SCALER_QSEED2,
DPU_SSPP_SCALER_QSEED3,
+ DPU_SSPP_SCALER_QSEED4,
DPU_SSPP_SCALER_RGB,
DPU_SSPP_CSC,
DPU_SSPP_CSC_10BIT,
@@ -166,6 +169,7 @@ enum {
*/
enum {
DPU_CTL_SPLIT_DISPLAY = 0x1,
+ DPU_CTL_ACTIVE_CFG,
DPU_CTL_MAX
};
@@ -152,7 +152,8 @@ static void _setup_mixer_ops(struct dpu_mdss_cfg *m,
unsigned long features)
{
ops->setup_mixer_out = dpu_hw_lm_setup_out;
- if (IS_SDM845_TARGET(m->hwversion) || IS_SDM670_TARGET(m->hwversion))
+ if (IS_SDM845_TARGET(m->hwversion) || IS_SDM670_TARGET(m->hwversion)
+ || IS_SC7180_TARGET(m->hwversion))
ops->setup_blend_config = dpu_hw_lm_setup_blend_config_sdm845;
else
ops->setup_blend_config = dpu_hw_lm_setup_blend_config;
@@ -1111,6 +1111,7 @@ static int __maybe_unused dpu_runtime_resume(struct device *dev)
static const struct of_device_id dpu_dt_match[] = {
{ .compatible = "qcom,sdm845-dpu", },
+ { .compatible = "qcom,sc7180-dpu", },
{}
};
MODULE_DEVICE_TABLE(of, dpu_dt_match);
@@ -1192,7 +1192,8 @@ static int add_display_components(struct device *dev,
* the interfaces to our components list.
*/
if (of_device_is_compatible(dev->of_node, "qcom,mdss") ||
- of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss")) {
+ of_device_is_compatible(dev->of_node, "qcom,sdm845-mdss") ||
+ of_device_is_compatible(dev->of_node, "qcom,sc7180-mdss")) {
ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
if (ret) {
DRM_DEV_ERROR(dev, "failed to populate children devices\n");
@@ -1317,6 +1318,7 @@ static int msm_pdev_remove(struct platform_device *pdev)
{ .compatible = "qcom,mdp4", .data = (void *)KMS_MDP4 },
{ .compatible = "qcom,mdss", .data = (void *)KMS_MDP5 },
{ .compatible = "qcom,sdm845-mdss", .data = (void *)KMS_DPU },
+ { .compatible = "qcom,sc7180-mdss", .data = (void *)KMS_DPU },
{}
};
MODULE_DEVICE_TABLE(of, dt_match);