diff mbox series

x86/mce/AMD: Allow Reserved types to be overwritten in smca_banks[]

Message ID 20191121141508.141273-1-Yazen.Ghannam@amd.com (mailing list archive)
State New, archived
Headers show
Series x86/mce/AMD: Allow Reserved types to be overwritten in smca_banks[] | expand

Commit Message

Yazen Ghannam Nov. 21, 2019, 2:15 p.m. UTC
From: Yazen Ghannam <yazen.ghannam@amd.com>

Each logical CPU in Scalable MCA systems controls a unique set of MCA
banks in the system. These banks are not shared between CPUs. The bank
types and ordering will be the same across CPUs on currently available
systems.

However, some CPUs may see a bank as Reserved/Read-as-Zero (RAZ) while
other CPUs do not. In this case, the bank seen as Reserved on one CPU is
assumed to be the same type as the bank seen as a known type on another
CPU. In general, this occurs when the hardware represented by the MCA
bank is disabled, e.g. disabled memory controllers on certain models,
etc. The MCA bank is disabled in the hardware, so there is no
possibility of getting an MCA/MCE from it even if it is assumed to have
a known type.

For example:

Full system:
	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         UMC         |          UMC
	 2    |         CS          |          CS

System with hardware disabled:
	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         UMC         |          RAZ
	 2    |         CS          |          CS

For this reason, there is a single, global struct smca_banks[] that is
initialized at boot time. This array is initialized on each CPU as it
comes online. However, the array will not be updated if an entry already
exists.

This works as expected when the first CPU (usually CPU0) has all
possible MCA banks enabled. But if the first CPU has a subset, then it
will save a "Reserved" type in smca_banks[]. Successive CPUs will then
not be able to update smca_banks[] even if they encounter a known bank
type.

This may result in unexpected behavior. Depending on the system
configuration, a user may observe issues enumerating the MCA
thresholding sysfs interface. The issues may be as trivial as sysfs
entries not being available, or as severe as system hangs.

For example:

	Bank  |  Type seen on CPU0  |  Type seen on CPU1
	------------------------------------------------
	 0    |         LS          |          LS
	 1    |         RAZ         |          UMC
	 2    |         CS          |          CS

Extend the smca_banks[] entry check to return if the entry is a
non-reserved type. Otherwise, continue so that CPUs that encounter a
known bank type can update smca_banks[].

Fixes: 68627a697c19 ("x86/mce/AMD, EDAC/mce_amd: Enumerate Reserved SMCA bank type")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
---
 arch/x86/kernel/cpu/mce/amd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 4f790c375580..ee0f211b5074 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -266,7 +266,7 @@  static void smca_configure(unsigned int bank, unsigned int cpu)
 	smca_set_misc_banks_map(bank, cpu);
 
 	/* Return early if this bank was already initialized. */
-	if (smca_banks[bank].hwid)
+	if (smca_banks[bank].hwid && smca_banks[bank].hwid->hwid_mcatype != 0)
 		return;
 
 	if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_IPID(bank), &low, &high)) {