diff mbox series

[v3,1/4] PM / QoS: Initial kunit test

Message ID 023ab2f86445e5eb81b39fc471bebe9bc173f993.1574699610.git.leonard.crestez@nxp.com (mailing list archive)
State New
Headers show
Series PM: QoS: Restore DEV_PM_QOS_MIN/MAX_FREQUENCY | expand

Commit Message

Leonard Crestez Nov. 25, 2019, 4:42 p.m. UTC
The pm_qos family of APIs are used in relatively difficult to reproduce
scenarios such as thermal throttling so they benefit from unit testing.

Start by adding basic tests from the the freq_qos APIs. It includes
tests for issues that were brought up on mailing lists:

https://patchwork.kernel.org/patch/11252425/#23017005
https://patchwork.kernel.org/patch/11253421/

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 drivers/base/Kconfig          |   4 ++
 drivers/base/power/Makefile   |   1 +
 drivers/base/power/qos-test.c | 116 ++++++++++++++++++++++++++++++++++
 3 files changed, 121 insertions(+)
 create mode 100644 drivers/base/power/qos-test.c

Comments

Matthias Kaehlcke Nov. 25, 2019, 8:19 p.m. UTC | #1
On Mon, Nov 25, 2019 at 06:42:16PM +0200, Leonard Crestez wrote:
> The pm_qos family of APIs are used in relatively difficult to reproduce
> scenarios such as thermal throttling so they benefit from unit testing.

indeed, a unit test is useful in this case!

> Start by adding basic tests from the the freq_qos APIs. It includes
> tests for issues that were brought up on mailing lists:
> 
> https://patchwork.kernel.org/patch/11252425/#23017005
> https://patchwork.kernel.org/patch/11253421/
> 
> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
> ---
>  drivers/base/Kconfig          |   4 ++
>  drivers/base/power/Makefile   |   1 +
>  drivers/base/power/qos-test.c | 116 ++++++++++++++++++++++++++++++++++
>  3 files changed, 121 insertions(+)
>  create mode 100644 drivers/base/power/qos-test.c
> 
> diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
> index e37d37684132..d4ae1c1adf69 100644
> --- a/drivers/base/Kconfig
> +++ b/drivers/base/Kconfig
> @@ -155,10 +155,14 @@ config DEBUG_TEST_DRIVER_REMOVE
>  
>  	  This option is expected to find errors and may render your system
>  	  unusable. You should say N here unless you are explicitly looking to
>  	  test this functionality.
>  
> +config PM_QOS_KUNIT_TEST
> +	bool "KUnit Test for PM QoS features"
> +	depends on KUNIT
> +
>  config HMEM_REPORTING
>  	bool
>  	default n
>  	depends on NUMA
>  	help
> diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
> index ec5bb190b9d0..8fdd0073eeeb 100644
> --- a/drivers/base/power/Makefile
> +++ b/drivers/base/power/Makefile
> @@ -2,7 +2,8 @@
>  obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
>  obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o wakeup_stats.o
>  obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
>  obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
>  obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
> +obj-$(CONFIG_PM_QOS_KUNIT_TEST) += qos-test.o
>  
>  ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
> diff --git a/drivers/base/power/qos-test.c b/drivers/base/power/qos-test.c
> new file mode 100644
> index 000000000000..8267d91332a8
> --- /dev/null
> +++ b/drivers/base/power/qos-test.c
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 NXP
> + */
> +#include <kunit/test.h>
> +#include <linux/pm_qos.h>
> +
> +/* Basic test for aggregating two "min" requests */
> +static void freq_qos_test_min(struct kunit *test)
> +{
> +	struct freq_constraints	qos;
> +	struct freq_qos_request	req1, req2;
> +	int ret;
> +
> +	freq_constraints_init(&qos);
> +	memset(&req1, 0, sizeof(req1));
> +	memset(&req2, 0, sizeof(req2));
> +
> +	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MIN, 1000);
> +	KUNIT_EXPECT_EQ(test, ret, 1);
> +	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MIN, 2000);
> +	KUNIT_EXPECT_EQ(test, ret, 1);
> +
> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 2000);
> +
> +	freq_qos_remove_request(&req2);
> +	KUNIT_EXPECT_EQ(test, ret, 1);

This checks (again) the return value of the above freq_qos_add_request() call,
which I suppose is not intended. Remove?

> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 1000);
> +
> +	freq_qos_remove_request(&req1);
> +	KUNIT_EXPECT_EQ(test, ret, 1);

ditto

> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN),
> +			FREQ_QOS_MIN_DEFAULT_VALUE);
> +}
> +
> +/* Test that requests for MAX_DEFAULT_VALUE have no effect */
> +static void freq_qos_test_maxdef(struct kunit *test)
> +{
> +	struct freq_constraints	qos;
> +	struct freq_qos_request	req1, req2;
> +	int ret;
> +
> +	freq_constraints_init(&qos);
> +	memset(&req1, 0, sizeof(req1));
> +	memset(&req2, 0, sizeof(req2));
> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX),
> +			FREQ_QOS_MAX_DEFAULT_VALUE);
> +
> +	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MAX,
> +			FREQ_QOS_MAX_DEFAULT_VALUE);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MAX,
> +			FREQ_QOS_MAX_DEFAULT_VALUE);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +
> +	/* Add max 1000 */
> +	ret = freq_qos_update_request(&req1, 1000);
> +	KUNIT_EXPECT_EQ(test, ret, 1);
> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
> +
> +	/* Add max 2000, no impact */
> +	ret = freq_qos_update_request(&req2, 2000);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
> +
> +	/* Remove max 2000, new max 1000 */

the code doesn't match the comment, max 1000 is removed

> +	ret = freq_qos_remove_request(&req1);
> +	KUNIT_EXPECT_EQ(test, ret, 1);
> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 2000);
> +}
> +
> +/*
> + * Test that a freq_qos_request can be readded after removal

nit: 're-added'. It took me a few secs to figure this is not a about
'read'ing something
Leonard Crestez Nov. 26, 2019, 12:36 p.m. UTC | #2
On 2019-11-25 10:20 PM, Matthias Kaehlcke wrote:
> On Mon, Nov 25, 2019 at 06:42:16PM +0200, Leonard Crestez wrote:
>> The pm_qos family of APIs are used in relatively difficult to reproduce
>> scenarios such as thermal throttling so they benefit from unit testing.
> 
> indeed, a unit test is useful in this case!
> 
>> Start by adding basic tests from the the freq_qos APIs. It includes
>> tests for issues that were brought up on mailing lists:

>> +/* Basic test for aggregating two "min" requests */
>> +static void freq_qos_test_min(struct kunit *test)
>> +{
>> +	struct freq_constraints	qos;
>> +	struct freq_qos_request	req1, req2;
>> +	int ret;
>> +
>> +	freq_constraints_init(&qos);
>> +	memset(&req1, 0, sizeof(req1));
>> +	memset(&req2, 0, sizeof(req2));
>> +
>> +	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MIN, 1000);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
>> +	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MIN, 2000);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
>> +
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 2000);
>> +
>> +	freq_qos_remove_request(&req2);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
> 
> This checks (again) the return value of the above freq_qos_add_request() call,
> which I suppose is not intended. Remove?

Should check the return value from freq_qos_remove_request

>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 1000);
>> +
>> +	freq_qos_remove_request(&req1);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
> 
> ditto
> 
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN),
>> +			FREQ_QOS_MIN_DEFAULT_VALUE);
>> +}
>> +
>> +/* Test that requests for MAX_DEFAULT_VALUE have no effect */
>> +static void freq_qos_test_maxdef(struct kunit *test)
>> +{
>> +	struct freq_constraints	qos;
>> +	struct freq_qos_request	req1, req2;
>> +	int ret;
>> +
>> +	freq_constraints_init(&qos);
>> +	memset(&req1, 0, sizeof(req1));
>> +	memset(&req2, 0, sizeof(req2));
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX),
>> +			FREQ_QOS_MAX_DEFAULT_VALUE);
>> +
>> +	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MAX,
>> +			FREQ_QOS_MAX_DEFAULT_VALUE);
>> +	KUNIT_EXPECT_EQ(test, ret, 0);
>> +	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MAX,
>> +			FREQ_QOS_MAX_DEFAULT_VALUE);
>> +	KUNIT_EXPECT_EQ(test, ret, 0);
>> +
>> +	/* Add max 1000 */
>> +	ret = freq_qos_update_request(&req1, 1000);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
>> +
>> +	/* Add max 2000, no impact */
>> +	ret = freq_qos_update_request(&req2, 2000);
>> +	KUNIT_EXPECT_EQ(test, ret, 0);
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
>> +
>> +	/* Remove max 2000, new max 1000 */
> 
> the code doesn't match the comment, max 1000 is removed

Fixed

>> +	ret = freq_qos_remove_request(&req1);
>> +	KUNIT_EXPECT_EQ(test, ret, 1);
>> +	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 2000);
>> +}
>> +
>> +/*
>> + * Test that a freq_qos_request can be readded after removal
> 
> nit: 're-added'. It took me a few secs to figure this is not a about
> 'read'ing something

Both re-add and readd seem to be valid, I'll change to "added again".

--
Regards,
Leonard
diff mbox series

Patch

diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index e37d37684132..d4ae1c1adf69 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -155,10 +155,14 @@  config DEBUG_TEST_DRIVER_REMOVE
 
 	  This option is expected to find errors and may render your system
 	  unusable. You should say N here unless you are explicitly looking to
 	  test this functionality.
 
+config PM_QOS_KUNIT_TEST
+	bool "KUnit Test for PM QoS features"
+	depends on KUNIT
+
 config HMEM_REPORTING
 	bool
 	default n
 	depends on NUMA
 	help
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index ec5bb190b9d0..8fdd0073eeeb 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -2,7 +2,8 @@ 
 obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o wakeup_stats.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
+obj-$(CONFIG_PM_QOS_KUNIT_TEST) += qos-test.o
 
 ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
diff --git a/drivers/base/power/qos-test.c b/drivers/base/power/qos-test.c
new file mode 100644
index 000000000000..8267d91332a8
--- /dev/null
+++ b/drivers/base/power/qos-test.c
@@ -0,0 +1,116 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 NXP
+ */
+#include <kunit/test.h>
+#include <linux/pm_qos.h>
+
+/* Basic test for aggregating two "min" requests */
+static void freq_qos_test_min(struct kunit *test)
+{
+	struct freq_constraints	qos;
+	struct freq_qos_request	req1, req2;
+	int ret;
+
+	freq_constraints_init(&qos);
+	memset(&req1, 0, sizeof(req1));
+	memset(&req2, 0, sizeof(req2));
+
+	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MIN, 1000);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MIN, 2000);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 2000);
+
+	freq_qos_remove_request(&req2);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 1000);
+
+	freq_qos_remove_request(&req1);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN),
+			FREQ_QOS_MIN_DEFAULT_VALUE);
+}
+
+/* Test that requests for MAX_DEFAULT_VALUE have no effect */
+static void freq_qos_test_maxdef(struct kunit *test)
+{
+	struct freq_constraints	qos;
+	struct freq_qos_request	req1, req2;
+	int ret;
+
+	freq_constraints_init(&qos);
+	memset(&req1, 0, sizeof(req1));
+	memset(&req2, 0, sizeof(req2));
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX),
+			FREQ_QOS_MAX_DEFAULT_VALUE);
+
+	ret = freq_qos_add_request(&qos, &req1, FREQ_QOS_MAX,
+			FREQ_QOS_MAX_DEFAULT_VALUE);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	ret = freq_qos_add_request(&qos, &req2, FREQ_QOS_MAX,
+			FREQ_QOS_MAX_DEFAULT_VALUE);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	/* Add max 1000 */
+	ret = freq_qos_update_request(&req1, 1000);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
+
+	/* Add max 2000, no impact */
+	ret = freq_qos_update_request(&req2, 2000);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 1000);
+
+	/* Remove max 2000, new max 1000 */
+	ret = freq_qos_remove_request(&req1);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MAX), 2000);
+}
+
+/*
+ * Test that a freq_qos_request can be readded after removal
+ * This issue was solved by commit 05ff1ba412fd ("PM: QoS: Invalidate frequency
+ * QoS requests after removal")
+ */
+static void freq_qos_test_readd(struct kunit *test)
+{
+	struct freq_constraints	qos;
+	struct freq_qos_request	req;
+	int ret;
+
+	freq_constraints_init(&qos);
+	memset(&req, 0, sizeof(req));
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN),
+			FREQ_QOS_MIN_DEFAULT_VALUE);
+
+	/* Add */
+	ret = freq_qos_add_request(&qos, &req, FREQ_QOS_MIN, 1000);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 1000);
+
+	/* Remove */
+	ret = freq_qos_remove_request(&req);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN),
+			FREQ_QOS_MIN_DEFAULT_VALUE);
+
+	/* Add again */
+	ret = freq_qos_add_request(&qos, &req, FREQ_QOS_MIN, 2000);
+	KUNIT_EXPECT_EQ(test, ret, 1);
+	KUNIT_EXPECT_EQ(test, freq_qos_read_value(&qos, FREQ_QOS_MIN), 2000);
+}
+
+static struct kunit_case pm_qos_test_cases[] = {
+	KUNIT_CASE(freq_qos_test_min),
+	KUNIT_CASE(freq_qos_test_maxdef),
+	KUNIT_CASE(freq_qos_test_readd),
+	{},
+};
+
+static struct kunit_suite pm_qos_test_module = {
+	.name = "qos-kunit-test",
+	.test_cases = pm_qos_test_cases,
+};
+kunit_test_suite(pm_qos_test_module);