[v6,17/17] dmaengine: ti: k3-udma: Wait for peer teardown completion if supported
diff mbox series

Message ID 20191128105945.13071-18-peter.ujfalusi@ti.com
State Superseded
Headers show
Series
  • dmaengine/soc: Add Texas Instruments UDMA support
Related show

Commit Message

Peter Ujfalusi Nov. 28, 2019, 10:59 a.m. UTC
Set the TDTYPE if it is supported on the platform (j721e) which will cause
UDMAP to wait for the remote peer to finish the teardown before returning
the teardown completed message.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/dma/ti/k3-udma.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

Patch
diff mbox series

diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index c1450b0a8224..5073e44caaa0 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -85,6 +85,7 @@  struct udma_rchan {
 
 #define UDMA_FLAG_PDMA_ACC32		BIT(0)
 #define UDMA_FLAG_PDMA_BURST		BIT(1)
+#define UDMA_FLAG_TDTYPE		BIT(2)
 
 struct udma_match_data {
 	u32 psil_base;
@@ -1545,7 +1546,8 @@  static int udma_tisci_tx_channel_config(struct udma_chan *uc)
 	req_tx.tx_supr_tdpkt = uc->notdpkt;
 	req_tx.tx_fetch_size = fetch_size >> 2;
 	req_tx.txcq_qnum = tc_ring;
-	if (uc->ep_type == PSIL_EP_PDMA_XY) {
+	if (uc->ep_type == PSIL_EP_PDMA_XY &&
+	    ud->match_data->flags & UDMA_FLAG_TDTYPE) {
 		/* wait for peer to complete the teardown for PDMAs */
 		req_tx.valid_params |=
 				TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID;
@@ -2979,7 +2981,7 @@  static struct udma_match_data am654_mcu_data = {
 static struct udma_match_data j721e_main_data = {
 	.psil_base = 0x1000,
 	.enable_memcpy_support = true,
-	.flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST,
+	.flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
 	.statictr_z_mask = GENMASK(23, 0),
 	.rchan_oes_offset = 0x400,
 	.tpl_levels = 3,
@@ -2993,7 +2995,7 @@  static struct udma_match_data j721e_main_data = {
 static struct udma_match_data j721e_mcu_data = {
 	.psil_base = 0x6000,
 	.enable_memcpy_support = false, /* MEM_TO_MEM is slow via MCU UDMA */
-	.flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST,
+	.flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
 	.statictr_z_mask = GENMASK(23, 0),
 	.rchan_oes_offset = 0x400,
 	.tpl_levels = 2,