[v2,7/9] drm/i915: Use the canonical [CRTC:%d:%s]/etc. format in i915_display_info
diff mbox series

Message ID 20191129185434.25549-8-ville.syrjala@linux.intel.com
State New
Headers show
Series
  • drm/i915: i915_display_info cleanup
Related show

Commit Message

Ville Syrjala Nov. 29, 2019, 6:54 p.m. UTC
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

Use the canonicalt "[CRTC:%d:%s]" format for the obj id/name
in the debugfs display_info dump. Everyone should already be
familiar with the format since it's used in the debug logs
extensively.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

Comments

Ramalingam C Dec. 2, 2019, 3:08 p.m. UTC | #1
On 2019-11-29 at 20:54:32 +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> Use the canonicalt "[CRTC:%d:%s]" format for the obj id/name
> in the debugfs display_info dump. Everyone should already be
> familiar with the format since it's used in the debug logs
> extensively.

Looks good to me.

Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

> 
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 3bf7d4e2f940..4dffbff1b8bd 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -2385,11 +2385,11 @@ static void intel_encoder_info(struct seq_file *m,
>  	struct drm_device *dev = &dev_priv->drm;
>  	struct intel_connector *connector;
>  
> -	seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
> +	seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n",
>  		   encoder->base.base.id, encoder->base.name);
>  
>  	for_each_connector_on_encoder(dev, &encoder->base, connector)
> -		seq_printf(m, "\t\tconnector %d: type: %s\n",
> +		seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n",
>  			   connector->base.base.id, connector->base.name);
>  }
>  
> @@ -2478,7 +2478,7 @@ static void intel_connector_info(struct seq_file *m,
>  	struct intel_encoder *intel_encoder = intel_connector->encoder;
>  	struct drm_display_mode *mode;
>  
> -	seq_printf(m, "connector %d: type %s, status: %s\n",
> +	seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n",
>  		   connector->base.id, connector->name,
>  		   drm_get_connector_status_name(connector->status));
>  
> @@ -2585,8 +2585,8 @@ static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc)
>  		plane_rotation(rot_str, sizeof(rot_str),
>  			       plane_state->uapi.rotation);
>  
> -		seq_printf(m, "\t--Plane id %d: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
> -			   plane->base.base.id,
> +		seq_printf(m, "\t[PLANE:%d:%s]: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
> +			   plane->base.base.id, plane->base.name,
>  			   plane_type(plane->base.type),
>  			   fb ? fb->base.id : 0,
>  			   fb ? format_name.str : "n/a",
> @@ -2631,8 +2631,8 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
>  	const struct intel_crtc_state *crtc_state =
>  		to_intel_crtc_state(crtc->base.state);
>  
> -	seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
> -		   crtc->base.base.id, pipe_name(crtc->pipe),
> +	seq_printf(m, "[CRTC:%d:%s]: active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
> +		   crtc->base.base.id, crtc->base.name,
>  		   yesno(crtc_state->hw.active),
>  		   crtc_state->pipe_src_w, crtc_state->pipe_src_h,
>  		   yesno(crtc_state->dither), crtc_state->pipe_bpp);
> -- 
> 2.23.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Ramalingam C Dec. 2, 2019, 3:43 p.m. UTC | #2
On 2019-12-02 at 20:38:23 +0530, Ramalingam C wrote:
> On 2019-11-29 at 20:54:32 +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > 
> > Use the canonicalt "[CRTC:%d:%s]" format for the obj id/name

%s/canonicalt/canonical

> > in the debugfs display_info dump. Everyone should already be
> > familiar with the format since it's used in the debug logs
> > extensively.
> 
> Looks good to me.
> 
> Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
> 
> > 
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_debugfs.c | 14 +++++++-------
> >  1 file changed, 7 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> > index 3bf7d4e2f940..4dffbff1b8bd 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -2385,11 +2385,11 @@ static void intel_encoder_info(struct seq_file *m,
> >  	struct drm_device *dev = &dev_priv->drm;
> >  	struct intel_connector *connector;
> >  
> > -	seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
> > +	seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n",
> >  		   encoder->base.base.id, encoder->base.name);
> >  
> >  	for_each_connector_on_encoder(dev, &encoder->base, connector)
> > -		seq_printf(m, "\t\tconnector %d: type: %s\n",
> > +		seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n",
> >  			   connector->base.base.id, connector->base.name);
> >  }
> >  
> > @@ -2478,7 +2478,7 @@ static void intel_connector_info(struct seq_file *m,
> >  	struct intel_encoder *intel_encoder = intel_connector->encoder;
> >  	struct drm_display_mode *mode;
> >  
> > -	seq_printf(m, "connector %d: type %s, status: %s\n",
> > +	seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n",
> >  		   connector->base.id, connector->name,
> >  		   drm_get_connector_status_name(connector->status));
> >  
> > @@ -2585,8 +2585,8 @@ static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc)
> >  		plane_rotation(rot_str, sizeof(rot_str),
> >  			       plane_state->uapi.rotation);
> >  
> > -		seq_printf(m, "\t--Plane id %d: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
> > -			   plane->base.base.id,
> > +		seq_printf(m, "\t[PLANE:%d:%s]: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
> > +			   plane->base.base.id, plane->base.name,
> >  			   plane_type(plane->base.type),
> >  			   fb ? fb->base.id : 0,
> >  			   fb ? format_name.str : "n/a",
> > @@ -2631,8 +2631,8 @@ static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
> >  	const struct intel_crtc_state *crtc_state =
> >  		to_intel_crtc_state(crtc->base.state);
> >  
> > -	seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
> > -		   crtc->base.base.id, pipe_name(crtc->pipe),
> > +	seq_printf(m, "[CRTC:%d:%s]: active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
> > +		   crtc->base.base.id, crtc->base.name,
> >  		   yesno(crtc_state->hw.active),
> >  		   crtc_state->pipe_src_w, crtc_state->pipe_src_h,
> >  		   yesno(crtc_state->dither), crtc_state->pipe_bpp);
> > -- 
> > 2.23.0
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 3bf7d4e2f940..4dffbff1b8bd 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2385,11 +2385,11 @@  static void intel_encoder_info(struct seq_file *m,
 	struct drm_device *dev = &dev_priv->drm;
 	struct intel_connector *connector;
 
-	seq_printf(m, "\tencoder %d: type: %s, connectors:\n",
+	seq_printf(m, "\t[ENCODER:%d:%s]: connectors:\n",
 		   encoder->base.base.id, encoder->base.name);
 
 	for_each_connector_on_encoder(dev, &encoder->base, connector)
-		seq_printf(m, "\t\tconnector %d: type: %s\n",
+		seq_printf(m, "\t\t[CONNECTOR:%d:%s]\n",
 			   connector->base.base.id, connector->base.name);
 }
 
@@ -2478,7 +2478,7 @@  static void intel_connector_info(struct seq_file *m,
 	struct intel_encoder *intel_encoder = intel_connector->encoder;
 	struct drm_display_mode *mode;
 
-	seq_printf(m, "connector %d: type %s, status: %s\n",
+	seq_printf(m, "[CONNECTOR:%d:%s]: status: %s\n",
 		   connector->base.id, connector->name,
 		   drm_get_connector_status_name(connector->status));
 
@@ -2585,8 +2585,8 @@  static void intel_plane_info(struct seq_file *m, struct intel_crtc *crtc)
 		plane_rotation(rot_str, sizeof(rot_str),
 			       plane_state->uapi.rotation);
 
-		seq_printf(m, "\t--Plane id %d: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
-			   plane->base.base.id,
+		seq_printf(m, "\t[PLANE:%d:%s]: type=%s, fb=%d,%s,%dx%d, src=" DRM_RECT_FP_FMT ", dst=" DRM_RECT_FMT ", rotation=%s\n",
+			   plane->base.base.id, plane->base.name,
 			   plane_type(plane->base.type),
 			   fb ? fb->base.id : 0,
 			   fb ? format_name.str : "n/a",
@@ -2631,8 +2631,8 @@  static void intel_crtc_info(struct seq_file *m, struct intel_crtc *crtc)
 	const struct intel_crtc_state *crtc_state =
 		to_intel_crtc_state(crtc->base.state);
 
-	seq_printf(m, "CRTC %d: pipe: %c, active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
-		   crtc->base.base.id, pipe_name(crtc->pipe),
+	seq_printf(m, "[CRTC:%d:%s]: active=%s, (size=%dx%d), dither=%s, bpp=%d\n",
+		   crtc->base.base.id, crtc->base.name,
 		   yesno(crtc_state->hw.active),
 		   crtc_state->pipe_src_w, crtc_state->pipe_src_h,
 		   yesno(crtc_state->dither), crtc_state->pipe_bpp);