diff mbox series

[v2,3/5] arm64: dts: ls1046a: Update QSPI node properties of ls1046ardb

Message ID 1575457098-18368-4-git-send-email-Ashish.Kumar@nxp.com (mailing list archive)
State Mainlined
Commit 070b761d546209ca787b8a1964e4c5b804233856
Headers show
Series Add dts support for various NXP boards | expand

Commit Message

Ashish Kumar Dec. 4, 2019, 10:58 a.m. UTC 
Update the compatibles to use jedec,spi-nor.
Also update the max-frequency to 50MHz and spi-tx-bus-width to 1.

Align the QSPI node with other similar boards like(ls1088ardb,
ls1046afrwy) as per bindings.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
---
v2:
Rebased to top
Use "jedec,spi-nor" in compatibles

 .../arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..dbc23d6cd3b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@ 
 &qspi {
 	status = "okay";
 
-	qflash0: flash@0 {
-		compatible = "spansion,m25p80";
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
-	qflash1: flash@1 {
-		compatible = "spansion,m25p80";
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <1>;
 	};
 };