[2/7] dt-bindings: Input: drop msm-vibrator in favor of clk-vibrator

Commit Message

Brian Masney Dec. 5, 2019, 12:24 a.m. UTC

Let's drop the msm-vibrator bindings so that the more generic
clk-vibrator can be used instead. No one is currently using these
bindings so this won't affect any users.

Signed-off-by: Brian Masney <[e-mail]>
---
 .../bindings/input/msm-vibrator.txt           | 36 -------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt

Comments

Rob Herring Dec. 17, 2019, 2:11 p.m. UTC | #1

On Wed,  4 Dec 2019 19:24:58 -0500, Brian Masney wrote:
> Let's drop the msm-vibrator bindings so that the more generic
> clk-vibrator can be used instead. No one is currently using these
> bindings so this won't affect any users.
> 
> Signed-off-by: Brian Masney <[e-mail]>
> ---
>  .../bindings/input/msm-vibrator.txt           | 36 -------------------
>  1 file changed, 36 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/msm-vibrator.txt
> 

Acked-by: Rob Herring <[e-mail]>

Patch

diff --git a/Documentation/devicetree/bindings/input/msm-vibrator.txt b/Documentation/devicetree/bindings/input/msm-vibrator.txt
deleted file mode 100644
index 8dcf014ef2e5..000000000000
--- a/Documentation/devicetree/bindings/input/msm-vibrator.txt
+++ /dev/null
@@ -1,36 +0,0 @@ 
-* Device tree bindings for the Qualcomm MSM vibrator
-
-Required properties:
-
-  - compatible: Should be one of
-		"qcom,msm8226-vibrator"
-		"qcom,msm8974-vibrator"
-  - reg: the base address and length of the IO memory for the registers.
-  - pinctrl-names: set to default.
-  - pinctrl-0: phandles pointing to pin configuration nodes. See
-               Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-  - clock-names: set to pwm
-  - clocks: phandle of the clock. See
-            Documentation/devicetree/bindings/clock/clock-bindings.txt
-  - enable-gpios: GPIO that enables the vibrator.
-
-Optional properties:
-
-  - vcc-supply: phandle to the regulator that provides power to the sensor.
-
-Example from a LG Nexus 5 (hammerhead) phone:
-
-vibrator@fd8c3450 {
-	reg = <0xfd8c3450 0x400>;
-	compatible = "qcom,msm8974-vibrator";
-
-	vcc-supply = <&pm8941_l19>;
-
-	clocks = <&mmcc CAMSS_GP1_CLK>;
-	clock-names = "pwm";
-
-	enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&vibrator_pin>;
-};