[v2,7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
diff mbox series

Message ID 1575851866-18919-8-git-send-email-jeff@labundy.com
State New
Headers show
Series
  • Add support for Azoteq IQS620A/621/622/624/625
Related show

Commit Message

Jeff LaBundy Dec. 9, 2019, 12:38 a.m. UTC
This patch adds support for the Azoteq IQS624 and IQS625 angular position
sensors, capable of reporting the angle of a rotating shaft down to 1 and
10 degrees of accuracy, respectively.

This patch also introduces a home for linear and angular position sensors.
Unlike resolvers, they are typically contactless and use the Hall effect.

Signed-off-by: Jeff LaBundy <jeff@labundy.com>
---
Changes in v2:
  - Merged 'Copyright' and 'Author' lines into one in introductory comments
  - Replaced 'error' with 'ret' throughout
  - Added iqs624_pos_angle_en and iqs624_pos_angle_get to remove duplicate
    logic previously used throughout
  - Refactored the logic in iqs624_pos_notifier and added a lock to safely
    evaluate variables that may change in response to user action
  - Refactored the logic in iqs624_pos_read_raw
  - Added a lock to iqs624_pos_read_event_config to account for cases in which
    the corresponding hardware state is in the process of being updated
  - Refactored the logic in iqs624_pos_write_event_config and read the initial
    angle in case it changed since having first been read in iqs624_pos_init
  - Removed iqs624_pos_init as its logic has since been absorbed elsewhere
  - Removed devm_add_action_or_reset failure message
  - Eliminated tabbed alignment of platform_driver struct members
  - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST

 drivers/iio/Kconfig               |   1 +
 drivers/iio/Makefile              |   1 +
 drivers/iio/position/Kconfig      |  19 +++
 drivers/iio/position/Makefile     |   7 +
 drivers/iio/position/iqs624-pos.c | 284 ++++++++++++++++++++++++++++++++++++++
 5 files changed, 312 insertions(+)
 create mode 100644 drivers/iio/position/Kconfig
 create mode 100644 drivers/iio/position/Makefile
 create mode 100644 drivers/iio/position/iqs624-pos.c

--
2.7.4

Comments

Jonathan Cameron Dec. 15, 2019, 4:53 p.m. UTC | #1
On Mon, 9 Dec 2019 00:38:41 +0000
Jeff LaBundy <jeff@labundy.com> wrote:

> This patch adds support for the Azoteq IQS624 and IQS625 angular position
> sensors, capable of reporting the angle of a rotating shaft down to 1 and
> 10 degrees of accuracy, respectively.
> 
> This patch also introduces a home for linear and angular position sensors.
> Unlike resolvers, they are typically contactless and use the Hall effect.
> 
> Signed-off-by: Jeff LaBundy <jeff@labundy.com>

Looks good

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

My current assumption is that Lee will take this lot via an immutable branch
in MFD once it's ready.  Shout if a different path makes sense.
> ---
> Changes in v2:
>   - Merged 'Copyright' and 'Author' lines into one in introductory comments
>   - Replaced 'error' with 'ret' throughout
>   - Added iqs624_pos_angle_en and iqs624_pos_angle_get to remove duplicate
>     logic previously used throughout
>   - Refactored the logic in iqs624_pos_notifier and added a lock to safely
>     evaluate variables that may change in response to user action
>   - Refactored the logic in iqs624_pos_read_raw
>   - Added a lock to iqs624_pos_read_event_config to account for cases in which
>     the corresponding hardware state is in the process of being updated
>   - Refactored the logic in iqs624_pos_write_event_config and read the initial
>     angle in case it changed since having first been read in iqs624_pos_init
>   - Removed iqs624_pos_init as its logic has since been absorbed elsewhere
>   - Removed devm_add_action_or_reset failure message
>   - Eliminated tabbed alignment of platform_driver struct members
>   - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST
> 
>  drivers/iio/Kconfig               |   1 +
>  drivers/iio/Makefile              |   1 +
>  drivers/iio/position/Kconfig      |  19 +++
>  drivers/iio/position/Makefile     |   7 +
>  drivers/iio/position/iqs624-pos.c | 284 ++++++++++++++++++++++++++++++++++++++
>  5 files changed, 312 insertions(+)
>  create mode 100644 drivers/iio/position/Kconfig
>  create mode 100644 drivers/iio/position/Makefile
>  create mode 100644 drivers/iio/position/iqs624-pos.c
> 
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index 5bd5185..d5c073a 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -88,6 +88,7 @@ source "drivers/iio/orientation/Kconfig"
>  if IIO_TRIGGER
>     source "drivers/iio/trigger/Kconfig"
>  endif #IIO_TRIGGER
> +source "drivers/iio/position/Kconfig"
>  source "drivers/iio/potentiometer/Kconfig"
>  source "drivers/iio/potentiostat/Kconfig"
>  source "drivers/iio/pressure/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index bff682a..1712011 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -31,6 +31,7 @@ obj-y += light/
>  obj-y += magnetometer/
>  obj-y += multiplexer/
>  obj-y += orientation/
> +obj-y += position/
>  obj-y += potentiometer/
>  obj-y += potentiostat/
>  obj-y += pressure/
> diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
> new file mode 100644
> index 0000000..eda67f0
> --- /dev/null
> +++ b/drivers/iio/position/Kconfig
> @@ -0,0 +1,19 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Linear and angular position sensors
> +#
> +# When adding new entries keep the list in alphabetical order
> +
> +menu "Linear and angular position sensors"
> +
> +config IQS624_POS
> +	tristate "Azoteq IQS624/625 angular position sensors"
> +	depends on MFD_IQS62X || COMPILE_TEST
> +	help
> +	  Say Y here if you want to build support for the Azoteq IQS624
> +	  and IQS625 angular position sensors.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called iqs624-pos.
> +
> +endmenu
> diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
> new file mode 100644
> index 0000000..3cbe7a7
> --- /dev/null
> +++ b/drivers/iio/position/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Makefile for IIO linear and angular position sensors
> +#
> +
> +# When adding new entries keep the list in alphabetical order
> +
> +obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o
> diff --git a/drivers/iio/position/iqs624-pos.c b/drivers/iio/position/iqs624-pos.c
> new file mode 100644
> index 0000000..af629bf5
> --- /dev/null
> +++ b/drivers/iio/position/iqs624-pos.c
> @@ -0,0 +1,284 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Azoteq IQS624/625 Angular Position Sensors
> + *
> + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> + */
> +
> +#include <linux/device.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/iio.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/iqs62x.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define IQS624_POS_DEG_OUT			0x16
> +
> +#define IQS624_POS_SCALE1			(314159 / 180)
> +#define IQS624_POS_SCALE2			100000
> +
> +struct iqs624_pos_private {
> +	struct iqs62x_core *iqs62x;
> +	struct notifier_block notifier;
> +	struct mutex lock;
> +	bool angle_en;
> +	u16 angle;
> +};
> +
> +static int iqs624_pos_angle_en(struct iqs62x_core *iqs62x, bool angle_en)
> +{
> +	unsigned int event_mask = IQS624_HALL_UI_WHL_EVENT;
> +
> +	/*
> +	 * The IQS625 reports angular position in the form of coarse intervals,
> +	 * so only interval change events are unmasked. Conversely, the IQS624
> +	 * reports angular position down to one degree of resolution, so wheel
> +	 * movement events are unmasked instead.
> +	 */
> +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> +		event_mask = IQS624_HALL_UI_INT_EVENT;
> +
> +	return regmap_update_bits(iqs62x->map, IQS624_HALL_UI, event_mask,
> +				  angle_en ? 0 : 0xFF);
> +}
> +
> +static int iqs624_pos_notifier(struct notifier_block *notifier,
> +			       unsigned long event_flags, void *context)
> +{
> +	struct iqs62x_event_data *event_data = context;
> +	struct iqs624_pos_private *iqs624_pos;
> +	struct iqs62x_core *iqs62x;
> +	struct iio_dev *indio_dev;
> +	u16 angle = event_data->ui_data;
> +	s64 timestamp;
> +	int ret;
> +
> +	iqs624_pos = container_of(notifier, struct iqs624_pos_private,
> +				  notifier);
> +	indio_dev = iio_priv_to_dev(iqs624_pos);
> +	timestamp = iio_get_time_ns(indio_dev);
> +
> +	iqs62x = iqs624_pos->iqs62x;
> +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> +		angle = event_data->interval;
> +
> +	mutex_lock(&iqs624_pos->lock);
> +
> +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> +		ret = iqs624_pos_angle_en(iqs62x, iqs624_pos->angle_en);
> +		if (ret) {
> +			dev_err(indio_dev->dev.parent,
> +				"Failed to re-initialize device: %d\n", ret);
> +			ret = NOTIFY_BAD;
> +		} else {
> +			ret = NOTIFY_OK;
> +		}
> +	} else if (iqs624_pos->angle_en && (angle != iqs624_pos->angle)) {
> +		iio_push_event(indio_dev,
> +			       IIO_UNMOD_EVENT_CODE(IIO_ANGL, 0,
> +						    IIO_EV_TYPE_CHANGE,
> +						    IIO_EV_DIR_NONE),
> +			       timestamp);
> +
> +		iqs624_pos->angle = angle;
> +		ret = NOTIFY_OK;
> +	} else {
> +		ret = NOTIFY_DONE;
> +	}
> +
> +	mutex_unlock(&iqs624_pos->lock);
> +
> +	return ret;
> +}
> +
> +static void iqs624_pos_notifier_unregister(void *context)
> +{
> +	struct iqs624_pos_private *iqs624_pos = context;
> +	struct iio_dev *indio_dev = iio_priv_to_dev(iqs624_pos);
> +	int ret;
> +
> +	ret = blocking_notifier_chain_unregister(&iqs624_pos->iqs62x->nh,
> +						 &iqs624_pos->notifier);
> +	if (ret)
> +		dev_err(indio_dev->dev.parent,
> +			"Failed to unregister notifier: %d\n", ret);
> +}
> +
> +static int iqs624_pos_angle_get(struct iqs62x_core *iqs62x, unsigned int *val)
> +{
> +	int ret;
> +	__le16 val_buf;
> +
> +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> +		return regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> +				   val);
> +
> +	ret = regmap_raw_read(iqs62x->map, IQS624_POS_DEG_OUT, &val_buf,
> +			      sizeof(val_buf));
> +	if (ret)
> +		return ret;
> +
> +	*val = le16_to_cpu(val_buf);
> +
> +	return 0;
> +}
> +
> +static int iqs624_pos_read_raw(struct iio_dev *indio_dev,
> +			       struct iio_chan_spec const *chan,
> +			       int *val, int *val2, long mask)
> +{
> +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> +	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
> +	unsigned int scale = 1;
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = iqs624_pos_angle_get(iqs62x, val);
> +		if (ret)
> +			return ret;
> +
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM) {
> +			ret = regmap_read(iqs62x->map, IQS624_INTERVAL_DIV,
> +					  &scale);
> +			if (ret)
> +				return ret;
> +		}
> +
> +		*val = scale * IQS624_POS_SCALE1;
> +		*val2 = IQS624_POS_SCALE2;
> +		return IIO_VAL_FRACTIONAL;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int iqs624_pos_read_event_config(struct iio_dev *indio_dev,
> +					const struct iio_chan_spec *chan,
> +					enum iio_event_type type,
> +					enum iio_event_direction dir)
> +{
> +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> +	int ret;
> +
> +	mutex_lock(&iqs624_pos->lock);
> +	ret = iqs624_pos->angle_en;
> +	mutex_unlock(&iqs624_pos->lock);
> +
> +	return ret;
> +}
> +
> +static int iqs624_pos_write_event_config(struct iio_dev *indio_dev,
> +					 const struct iio_chan_spec *chan,
> +					 enum iio_event_type type,
> +					 enum iio_event_direction dir,
> +					 int state)
> +{
> +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> +	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
> +	unsigned int val;
> +	int ret;
> +
> +	mutex_lock(&iqs624_pos->lock);
> +
> +	ret = iqs624_pos_angle_get(iqs62x, &val);
> +	if (ret)
> +		goto err_mutex;
> +
> +	ret = iqs624_pos_angle_en(iqs62x, state);
> +	if (ret)
> +		goto err_mutex;
> +
> +	iqs624_pos->angle = val;
> +	iqs624_pos->angle_en = state;
> +
> +err_mutex:
> +	mutex_unlock(&iqs624_pos->lock);
> +
> +	return ret;
> +}
> +
> +static const struct iio_info iqs624_pos_info = {
> +	.read_raw = &iqs624_pos_read_raw,
> +	.read_event_config = iqs624_pos_read_event_config,
> +	.write_event_config = iqs624_pos_write_event_config,
> +};
> +
> +static const struct iio_event_spec iqs624_pos_events[] = {
> +	{
> +		.type = IIO_EV_TYPE_CHANGE,
> +		.dir = IIO_EV_DIR_NONE,
> +		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
> +	},
> +};
> +
> +static const struct iio_chan_spec iqs624_pos_channels[] = {
> +	{
> +		.type = IIO_ANGL,
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> +				      BIT(IIO_CHAN_INFO_SCALE),
> +		.event_spec = iqs624_pos_events,
> +		.num_event_specs = ARRAY_SIZE(iqs624_pos_events),
> +	},
> +};
> +
> +static int iqs624_pos_probe(struct platform_device *pdev)
> +{
> +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> +	struct iqs624_pos_private *iqs624_pos;
> +	struct iio_dev *indio_dev;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs624_pos));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	iqs624_pos = iio_priv(indio_dev);
> +	iqs624_pos->iqs62x = iqs62x;
> +
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->channels = iqs624_pos_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(iqs624_pos_channels);
> +	indio_dev->name = iqs62x->dev_desc->dev_name;
> +	indio_dev->info = &iqs624_pos_info;
> +
> +	mutex_init(&iqs624_pos->lock);
> +
> +	iqs624_pos->notifier.notifier_call = iqs624_pos_notifier;
> +	ret = blocking_notifier_chain_register(&iqs624_pos->iqs62x->nh,
> +					       &iqs624_pos->notifier);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +				       iqs624_pos_notifier_unregister,
> +				       iqs624_pos);
> +	if (ret)
> +		return ret;
> +
> +	return devm_iio_device_register(&pdev->dev, indio_dev);
> +}
> +
> +static struct platform_driver iqs624_pos_platform_driver = {
> +	.driver = {
> +		.name = IQS624_DRV_NAME_POS,
> +	},
> +	.probe = iqs624_pos_probe,
> +};
> +module_platform_driver(iqs624_pos_platform_driver);
> +
> +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> +MODULE_DESCRIPTION("Azoteq IQS624/625 Angular Position Sensors");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" IQS624_DRV_NAME_POS);
> --
> 2.7.4
>
Jeff LaBundy Jan. 1, 2020, 10:51 p.m. UTC | #2
Hi Jonathan,

Thank you for your continued support on this project.

On Sun, Dec 15, 2019 at 04:53:28PM +0000, Jonathan Cameron wrote:
> On Mon, 9 Dec 2019 00:38:41 +0000
> Jeff LaBundy <jeff@labundy.com> wrote:
> 
> > This patch adds support for the Azoteq IQS624 and IQS625 angular position
> > sensors, capable of reporting the angle of a rotating shaft down to 1 and
> > 10 degrees of accuracy, respectively.
> > 
> > This patch also introduces a home for linear and angular position sensors.
> > Unlike resolvers, they are typically contactless and use the Hall effect.
> > 
> > Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> 
> Looks good
> 
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> 
> My current assumption is that Lee will take this lot via an immutable branch
> in MFD once it's ready.  Shout if a different path makes sense.

Same here. @Lee, please let us know if you disagree.

> > ---
> > Changes in v2:
> >   - Merged 'Copyright' and 'Author' lines into one in introductory comments
> >   - Replaced 'error' with 'ret' throughout
> >   - Added iqs624_pos_angle_en and iqs624_pos_angle_get to remove duplicate
> >     logic previously used throughout
> >   - Refactored the logic in iqs624_pos_notifier and added a lock to safely
> >     evaluate variables that may change in response to user action
> >   - Refactored the logic in iqs624_pos_read_raw
> >   - Added a lock to iqs624_pos_read_event_config to account for cases in which
> >     the corresponding hardware state is in the process of being updated
> >   - Refactored the logic in iqs624_pos_write_event_config and read the initial
> >     angle in case it changed since having first been read in iqs624_pos_init
> >   - Removed iqs624_pos_init as its logic has since been absorbed elsewhere
> >   - Removed devm_add_action_or_reset failure message
> >   - Eliminated tabbed alignment of platform_driver struct members
> >   - Changed Kconfig "depends on" logic to MFD_IQS62X || COMPILE_TEST
> > 
> >  drivers/iio/Kconfig               |   1 +
> >  drivers/iio/Makefile              |   1 +
> >  drivers/iio/position/Kconfig      |  19 +++
> >  drivers/iio/position/Makefile     |   7 +
> >  drivers/iio/position/iqs624-pos.c | 284 ++++++++++++++++++++++++++++++++++++++
> >  5 files changed, 312 insertions(+)
> >  create mode 100644 drivers/iio/position/Kconfig
> >  create mode 100644 drivers/iio/position/Makefile
> >  create mode 100644 drivers/iio/position/iqs624-pos.c
> > 
> > diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> > index 5bd5185..d5c073a 100644
> > --- a/drivers/iio/Kconfig
> > +++ b/drivers/iio/Kconfig
> > @@ -88,6 +88,7 @@ source "drivers/iio/orientation/Kconfig"
> >  if IIO_TRIGGER
> >     source "drivers/iio/trigger/Kconfig"
> >  endif #IIO_TRIGGER
> > +source "drivers/iio/position/Kconfig"
> >  source "drivers/iio/potentiometer/Kconfig"
> >  source "drivers/iio/potentiostat/Kconfig"
> >  source "drivers/iio/pressure/Kconfig"
> > diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> > index bff682a..1712011 100644
> > --- a/drivers/iio/Makefile
> > +++ b/drivers/iio/Makefile
> > @@ -31,6 +31,7 @@ obj-y += light/
> >  obj-y += magnetometer/
> >  obj-y += multiplexer/
> >  obj-y += orientation/
> > +obj-y += position/
> >  obj-y += potentiometer/
> >  obj-y += potentiostat/
> >  obj-y += pressure/
> > diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
> > new file mode 100644
> > index 0000000..eda67f0
> > --- /dev/null
> > +++ b/drivers/iio/position/Kconfig
> > @@ -0,0 +1,19 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +#
> > +# Linear and angular position sensors
> > +#
> > +# When adding new entries keep the list in alphabetical order
> > +
> > +menu "Linear and angular position sensors"
> > +
> > +config IQS624_POS
> > +	tristate "Azoteq IQS624/625 angular position sensors"
> > +	depends on MFD_IQS62X || COMPILE_TEST
> > +	help
> > +	  Say Y here if you want to build support for the Azoteq IQS624
> > +	  and IQS625 angular position sensors.
> > +
> > +	  To compile this driver as a module, choose M here: the module
> > +	  will be called iqs624-pos.
> > +
> > +endmenu
> > diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
> > new file mode 100644
> > index 0000000..3cbe7a7
> > --- /dev/null
> > +++ b/drivers/iio/position/Makefile
> > @@ -0,0 +1,7 @@
> > +#
> > +# Makefile for IIO linear and angular position sensors
> > +#
> > +
> > +# When adding new entries keep the list in alphabetical order
> > +
> > +obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o
> > diff --git a/drivers/iio/position/iqs624-pos.c b/drivers/iio/position/iqs624-pos.c
> > new file mode 100644
> > index 0000000..af629bf5
> > --- /dev/null
> > +++ b/drivers/iio/position/iqs624-pos.c
> > @@ -0,0 +1,284 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Azoteq IQS624/625 Angular Position Sensors
> > + *
> > + * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/iio/events.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mfd/iqs62x.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/notifier.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define IQS624_POS_DEG_OUT			0x16
> > +
> > +#define IQS624_POS_SCALE1			(314159 / 180)
> > +#define IQS624_POS_SCALE2			100000
> > +
> > +struct iqs624_pos_private {
> > +	struct iqs62x_core *iqs62x;
> > +	struct notifier_block notifier;
> > +	struct mutex lock;
> > +	bool angle_en;
> > +	u16 angle;
> > +};
> > +
> > +static int iqs624_pos_angle_en(struct iqs62x_core *iqs62x, bool angle_en)
> > +{
> > +	unsigned int event_mask = IQS624_HALL_UI_WHL_EVENT;
> > +
> > +	/*
> > +	 * The IQS625 reports angular position in the form of coarse intervals,
> > +	 * so only interval change events are unmasked. Conversely, the IQS624
> > +	 * reports angular position down to one degree of resolution, so wheel
> > +	 * movement events are unmasked instead.
> > +	 */
> > +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> > +		event_mask = IQS624_HALL_UI_INT_EVENT;
> > +
> > +	return regmap_update_bits(iqs62x->map, IQS624_HALL_UI, event_mask,
> > +				  angle_en ? 0 : 0xFF);
> > +}
> > +
> > +static int iqs624_pos_notifier(struct notifier_block *notifier,
> > +			       unsigned long event_flags, void *context)
> > +{
> > +	struct iqs62x_event_data *event_data = context;
> > +	struct iqs624_pos_private *iqs624_pos;
> > +	struct iqs62x_core *iqs62x;
> > +	struct iio_dev *indio_dev;
> > +	u16 angle = event_data->ui_data;
> > +	s64 timestamp;
> > +	int ret;
> > +
> > +	iqs624_pos = container_of(notifier, struct iqs624_pos_private,
> > +				  notifier);
> > +	indio_dev = iio_priv_to_dev(iqs624_pos);
> > +	timestamp = iio_get_time_ns(indio_dev);
> > +
> > +	iqs62x = iqs624_pos->iqs62x;
> > +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> > +		angle = event_data->interval;
> > +
> > +	mutex_lock(&iqs624_pos->lock);
> > +
> > +	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
> > +		ret = iqs624_pos_angle_en(iqs62x, iqs624_pos->angle_en);
> > +		if (ret) {
> > +			dev_err(indio_dev->dev.parent,
> > +				"Failed to re-initialize device: %d\n", ret);
> > +			ret = NOTIFY_BAD;
> > +		} else {
> > +			ret = NOTIFY_OK;
> > +		}
> > +	} else if (iqs624_pos->angle_en && (angle != iqs624_pos->angle)) {
> > +		iio_push_event(indio_dev,
> > +			       IIO_UNMOD_EVENT_CODE(IIO_ANGL, 0,
> > +						    IIO_EV_TYPE_CHANGE,
> > +						    IIO_EV_DIR_NONE),
> > +			       timestamp);
> > +
> > +		iqs624_pos->angle = angle;
> > +		ret = NOTIFY_OK;
> > +	} else {
> > +		ret = NOTIFY_DONE;
> > +	}
> > +
> > +	mutex_unlock(&iqs624_pos->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static void iqs624_pos_notifier_unregister(void *context)
> > +{
> > +	struct iqs624_pos_private *iqs624_pos = context;
> > +	struct iio_dev *indio_dev = iio_priv_to_dev(iqs624_pos);
> > +	int ret;
> > +
> > +	ret = blocking_notifier_chain_unregister(&iqs624_pos->iqs62x->nh,
> > +						 &iqs624_pos->notifier);
> > +	if (ret)
> > +		dev_err(indio_dev->dev.parent,
> > +			"Failed to unregister notifier: %d\n", ret);
> > +}
> > +
> > +static int iqs624_pos_angle_get(struct iqs62x_core *iqs62x, unsigned int *val)
> > +{
> > +	int ret;
> > +	__le16 val_buf;
> > +
> > +	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
> > +		return regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
> > +				   val);
> > +
> > +	ret = regmap_raw_read(iqs62x->map, IQS624_POS_DEG_OUT, &val_buf,
> > +			      sizeof(val_buf));
> > +	if (ret)
> > +		return ret;
> > +
> > +	*val = le16_to_cpu(val_buf);
> > +
> > +	return 0;
> > +}
> > +
> > +static int iqs624_pos_read_raw(struct iio_dev *indio_dev,
> > +			       struct iio_chan_spec const *chan,
> > +			       int *val, int *val2, long mask)
> > +{
> > +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> > +	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
> > +	unsigned int scale = 1;
> > +	int ret;
> > +
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_RAW:
> > +		ret = iqs624_pos_angle_get(iqs62x, val);
> > +		if (ret)
> > +			return ret;
> > +
> > +		return IIO_VAL_INT;
> > +
> > +	case IIO_CHAN_INFO_SCALE:
> > +		if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM) {
> > +			ret = regmap_read(iqs62x->map, IQS624_INTERVAL_DIV,
> > +					  &scale);
> > +			if (ret)
> > +				return ret;
> > +		}
> > +
> > +		*val = scale * IQS624_POS_SCALE1;
> > +		*val2 = IQS624_POS_SCALE2;
> > +		return IIO_VAL_FRACTIONAL;
> > +
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +}
> > +
> > +static int iqs624_pos_read_event_config(struct iio_dev *indio_dev,
> > +					const struct iio_chan_spec *chan,
> > +					enum iio_event_type type,
> > +					enum iio_event_direction dir)
> > +{
> > +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> > +	int ret;
> > +
> > +	mutex_lock(&iqs624_pos->lock);
> > +	ret = iqs624_pos->angle_en;
> > +	mutex_unlock(&iqs624_pos->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static int iqs624_pos_write_event_config(struct iio_dev *indio_dev,
> > +					 const struct iio_chan_spec *chan,
> > +					 enum iio_event_type type,
> > +					 enum iio_event_direction dir,
> > +					 int state)
> > +{
> > +	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
> > +	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
> > +	unsigned int val;
> > +	int ret;
> > +
> > +	mutex_lock(&iqs624_pos->lock);
> > +
> > +	ret = iqs624_pos_angle_get(iqs62x, &val);
> > +	if (ret)
> > +		goto err_mutex;
> > +
> > +	ret = iqs624_pos_angle_en(iqs62x, state);
> > +	if (ret)
> > +		goto err_mutex;
> > +
> > +	iqs624_pos->angle = val;
> > +	iqs624_pos->angle_en = state;
> > +
> > +err_mutex:
> > +	mutex_unlock(&iqs624_pos->lock);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct iio_info iqs624_pos_info = {
> > +	.read_raw = &iqs624_pos_read_raw,
> > +	.read_event_config = iqs624_pos_read_event_config,
> > +	.write_event_config = iqs624_pos_write_event_config,
> > +};
> > +
> > +static const struct iio_event_spec iqs624_pos_events[] = {
> > +	{
> > +		.type = IIO_EV_TYPE_CHANGE,
> > +		.dir = IIO_EV_DIR_NONE,
> > +		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
> > +	},
> > +};
> > +
> > +static const struct iio_chan_spec iqs624_pos_channels[] = {
> > +	{
> > +		.type = IIO_ANGL,
> > +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > +				      BIT(IIO_CHAN_INFO_SCALE),
> > +		.event_spec = iqs624_pos_events,
> > +		.num_event_specs = ARRAY_SIZE(iqs624_pos_events),
> > +	},
> > +};
> > +
> > +static int iqs624_pos_probe(struct platform_device *pdev)
> > +{
> > +	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
> > +	struct iqs624_pos_private *iqs624_pos;
> > +	struct iio_dev *indio_dev;
> > +	int ret;
> > +
> > +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs624_pos));
> > +	if (!indio_dev)
> > +		return -ENOMEM;
> > +
> > +	iqs624_pos = iio_priv(indio_dev);
> > +	iqs624_pos->iqs62x = iqs62x;
> > +
> > +	indio_dev->modes = INDIO_DIRECT_MODE;
> > +	indio_dev->dev.parent = &pdev->dev;
> > +	indio_dev->channels = iqs624_pos_channels;
> > +	indio_dev->num_channels = ARRAY_SIZE(iqs624_pos_channels);
> > +	indio_dev->name = iqs62x->dev_desc->dev_name;
> > +	indio_dev->info = &iqs624_pos_info;
> > +
> > +	mutex_init(&iqs624_pos->lock);
> > +
> > +	iqs624_pos->notifier.notifier_call = iqs624_pos_notifier;
> > +	ret = blocking_notifier_chain_register(&iqs624_pos->iqs62x->nh,
> > +					       &iqs624_pos->notifier);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = devm_add_action_or_reset(&pdev->dev,
> > +				       iqs624_pos_notifier_unregister,
> > +				       iqs624_pos);
> > +	if (ret)
> > +		return ret;
> > +
> > +	return devm_iio_device_register(&pdev->dev, indio_dev);
> > +}
> > +
> > +static struct platform_driver iqs624_pos_platform_driver = {
> > +	.driver = {
> > +		.name = IQS624_DRV_NAME_POS,
> > +	},
> > +	.probe = iqs624_pos_probe,
> > +};
> > +module_platform_driver(iqs624_pos_platform_driver);
> > +
> > +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
> > +MODULE_DESCRIPTION("Azoteq IQS624/625 Angular Position Sensors");
> > +MODULE_LICENSE("GPL");
> > +MODULE_ALIAS("platform:" IQS624_DRV_NAME_POS);
> > --
> > 2.7.4
> > 
> 

Wishing you a Happy New Year,
Jeff LaBundy
Lee Jones Jan. 2, 2020, 7:57 a.m. UTC | #3
On Wed, 01 Jan 2020, Jeff LaBundy wrote:

> Hi Jonathan,
> 
> Thank you for your continued support on this project.
> 
> On Sun, Dec 15, 2019 at 04:53:28PM +0000, Jonathan Cameron wrote:
> > On Mon, 9 Dec 2019 00:38:41 +0000
> > Jeff LaBundy <jeff@labundy.com> wrote:
> > 
> > > This patch adds support for the Azoteq IQS624 and IQS625 angular position
> > > sensors, capable of reporting the angle of a rotating shaft down to 1 and
> > > 10 degrees of accuracy, respectively.
> > > 
> > > This patch also introduces a home for linear and angular position sensors.
> > > Unlike resolvers, they are typically contactless and use the Hall effect.
> > > 
> > > Signed-off-by: Jeff LaBundy <jeff@labundy.com>
> > 
> > Looks good
> > 
> > Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> > 
> > My current assumption is that Lee will take this lot via an immutable branch
> > in MFD once it's ready.  Shout if a different path makes sense.
> 
> Same here. @Lee, please let us know if you disagree.

That's fine.

Patch
diff mbox series

diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index 5bd5185..d5c073a 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -88,6 +88,7 @@  source "drivers/iio/orientation/Kconfig"
 if IIO_TRIGGER
    source "drivers/iio/trigger/Kconfig"
 endif #IIO_TRIGGER
+source "drivers/iio/position/Kconfig"
 source "drivers/iio/potentiometer/Kconfig"
 source "drivers/iio/potentiostat/Kconfig"
 source "drivers/iio/pressure/Kconfig"
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index bff682a..1712011 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -31,6 +31,7 @@  obj-y += light/
 obj-y += magnetometer/
 obj-y += multiplexer/
 obj-y += orientation/
+obj-y += position/
 obj-y += potentiometer/
 obj-y += potentiostat/
 obj-y += pressure/
diff --git a/drivers/iio/position/Kconfig b/drivers/iio/position/Kconfig
new file mode 100644
index 0000000..eda67f0
--- /dev/null
+++ b/drivers/iio/position/Kconfig
@@ -0,0 +1,19 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Linear and angular position sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Linear and angular position sensors"
+
+config IQS624_POS
+	tristate "Azoteq IQS624/625 angular position sensors"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS624
+	  and IQS625 angular position sensors.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs624-pos.
+
+endmenu
diff --git a/drivers/iio/position/Makefile b/drivers/iio/position/Makefile
new file mode 100644
index 0000000..3cbe7a7
--- /dev/null
+++ b/drivers/iio/position/Makefile
@@ -0,0 +1,7 @@ 
+#
+# Makefile for IIO linear and angular position sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+
+obj-$(CONFIG_IQS624_POS)	+= iqs624-pos.o
diff --git a/drivers/iio/position/iqs624-pos.c b/drivers/iio/position/iqs624-pos.c
new file mode 100644
index 0000000..af629bf5
--- /dev/null
+++ b/drivers/iio/position/iqs624-pos.c
@@ -0,0 +1,284 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS624/625 Angular Position Sensors
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS624_POS_DEG_OUT			0x16
+
+#define IQS624_POS_SCALE1			(314159 / 180)
+#define IQS624_POS_SCALE2			100000
+
+struct iqs624_pos_private {
+	struct iqs62x_core *iqs62x;
+	struct notifier_block notifier;
+	struct mutex lock;
+	bool angle_en;
+	u16 angle;
+};
+
+static int iqs624_pos_angle_en(struct iqs62x_core *iqs62x, bool angle_en)
+{
+	unsigned int event_mask = IQS624_HALL_UI_WHL_EVENT;
+
+	/*
+	 * The IQS625 reports angular position in the form of coarse intervals,
+	 * so only interval change events are unmasked. Conversely, the IQS624
+	 * reports angular position down to one degree of resolution, so wheel
+	 * movement events are unmasked instead.
+	 */
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		event_mask = IQS624_HALL_UI_INT_EVENT;
+
+	return regmap_update_bits(iqs62x->map, IQS624_HALL_UI, event_mask,
+				  angle_en ? 0 : 0xFF);
+}
+
+static int iqs624_pos_notifier(struct notifier_block *notifier,
+			       unsigned long event_flags, void *context)
+{
+	struct iqs62x_event_data *event_data = context;
+	struct iqs624_pos_private *iqs624_pos;
+	struct iqs62x_core *iqs62x;
+	struct iio_dev *indio_dev;
+	u16 angle = event_data->ui_data;
+	s64 timestamp;
+	int ret;
+
+	iqs624_pos = container_of(notifier, struct iqs624_pos_private,
+				  notifier);
+	indio_dev = iio_priv_to_dev(iqs624_pos);
+	timestamp = iio_get_time_ns(indio_dev);
+
+	iqs62x = iqs624_pos->iqs62x;
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		angle = event_data->interval;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	if (event_flags & BIT(IQS62X_EVENT_SYS_RESET)) {
+		ret = iqs624_pos_angle_en(iqs62x, iqs624_pos->angle_en);
+		if (ret) {
+			dev_err(indio_dev->dev.parent,
+				"Failed to re-initialize device: %d\n", ret);
+			ret = NOTIFY_BAD;
+		} else {
+			ret = NOTIFY_OK;
+		}
+	} else if (iqs624_pos->angle_en && (angle != iqs624_pos->angle)) {
+		iio_push_event(indio_dev,
+			       IIO_UNMOD_EVENT_CODE(IIO_ANGL, 0,
+						    IIO_EV_TYPE_CHANGE,
+						    IIO_EV_DIR_NONE),
+			       timestamp);
+
+		iqs624_pos->angle = angle;
+		ret = NOTIFY_OK;
+	} else {
+		ret = NOTIFY_DONE;
+	}
+
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static void iqs624_pos_notifier_unregister(void *context)
+{
+	struct iqs624_pos_private *iqs624_pos = context;
+	struct iio_dev *indio_dev = iio_priv_to_dev(iqs624_pos);
+	int ret;
+
+	ret = blocking_notifier_chain_unregister(&iqs624_pos->iqs62x->nh,
+						 &iqs624_pos->notifier);
+	if (ret)
+		dev_err(indio_dev->dev.parent,
+			"Failed to unregister notifier: %d\n", ret);
+}
+
+static int iqs624_pos_angle_get(struct iqs62x_core *iqs62x, unsigned int *val)
+{
+	int ret;
+	__le16 val_buf;
+
+	if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM)
+		return regmap_read(iqs62x->map, iqs62x->dev_desc->interval,
+				   val);
+
+	ret = regmap_raw_read(iqs62x->map, IQS624_POS_DEG_OUT, &val_buf,
+			      sizeof(val_buf));
+	if (ret)
+		return ret;
+
+	*val = le16_to_cpu(val_buf);
+
+	return 0;
+}
+
+static int iqs624_pos_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int scale = 1;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iqs624_pos_angle_get(iqs62x, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		if (iqs62x->dev_desc->prod_num == IQS625_PROD_NUM) {
+			ret = regmap_read(iqs62x->map, IQS624_INTERVAL_DIV,
+					  &scale);
+			if (ret)
+				return ret;
+		}
+
+		*val = scale * IQS624_POS_SCALE1;
+		*val2 = IQS624_POS_SCALE2;
+		return IIO_VAL_FRACTIONAL;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int iqs624_pos_read_event_config(struct iio_dev *indio_dev,
+					const struct iio_chan_spec *chan,
+					enum iio_event_type type,
+					enum iio_event_direction dir)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+	ret = iqs624_pos->angle_en;
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static int iqs624_pos_write_event_config(struct iio_dev *indio_dev,
+					 const struct iio_chan_spec *chan,
+					 enum iio_event_type type,
+					 enum iio_event_direction dir,
+					 int state)
+{
+	struct iqs624_pos_private *iqs624_pos = iio_priv(indio_dev);
+	struct iqs62x_core *iqs62x = iqs624_pos->iqs62x;
+	unsigned int val;
+	int ret;
+
+	mutex_lock(&iqs624_pos->lock);
+
+	ret = iqs624_pos_angle_get(iqs62x, &val);
+	if (ret)
+		goto err_mutex;
+
+	ret = iqs624_pos_angle_en(iqs62x, state);
+	if (ret)
+		goto err_mutex;
+
+	iqs624_pos->angle = val;
+	iqs624_pos->angle_en = state;
+
+err_mutex:
+	mutex_unlock(&iqs624_pos->lock);
+
+	return ret;
+}
+
+static const struct iio_info iqs624_pos_info = {
+	.read_raw = &iqs624_pos_read_raw,
+	.read_event_config = iqs624_pos_read_event_config,
+	.write_event_config = iqs624_pos_write_event_config,
+};
+
+static const struct iio_event_spec iqs624_pos_events[] = {
+	{
+		.type = IIO_EV_TYPE_CHANGE,
+		.dir = IIO_EV_DIR_NONE,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec iqs624_pos_channels[] = {
+	{
+		.type = IIO_ANGL,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.event_spec = iqs624_pos_events,
+		.num_event_specs = ARRAY_SIZE(iqs624_pos_events),
+	},
+};
+
+static int iqs624_pos_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iqs624_pos_private *iqs624_pos;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*iqs624_pos));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iqs624_pos = iio_priv(indio_dev);
+	iqs624_pos->iqs62x = iqs62x;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->channels = iqs624_pos_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs624_pos_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs624_pos_info;
+
+	mutex_init(&iqs624_pos->lock);
+
+	iqs624_pos->notifier.notifier_call = iqs624_pos_notifier;
+	ret = blocking_notifier_chain_register(&iqs624_pos->iqs62x->nh,
+					       &iqs624_pos->notifier);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       iqs624_pos_notifier_unregister,
+				       iqs624_pos);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs624_pos_platform_driver = {
+	.driver = {
+		.name = IQS624_DRV_NAME_POS,
+	},
+	.probe = iqs624_pos_probe,
+};
+module_platform_driver(iqs624_pos_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS624/625 Angular Position Sensors");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" IQS624_DRV_NAME_POS);