@@ -85,6 +85,7 @@ struct udma_rchan {
#define UDMA_FLAG_PDMA_ACC32 BIT(0)
#define UDMA_FLAG_PDMA_BURST BIT(1)
+#define UDMA_FLAG_TDTYPE BIT(2)
struct udma_match_data {
u32 psil_base;
@@ -1586,7 +1587,8 @@ static int udma_tisci_tx_channel_config(struct udma_chan *uc)
req_tx.tx_supr_tdpkt = uc->notdpkt;
req_tx.tx_fetch_size = fetch_size >> 2;
req_tx.txcq_qnum = tc_ring;
- if (uc->ep_type == PSIL_EP_PDMA_XY) {
+ if (uc->ep_type == PSIL_EP_PDMA_XY &&
+ ud->match_data->flags & UDMA_FLAG_TDTYPE) {
/* wait for peer to complete the teardown for PDMAs */
req_tx.valid_params |=
TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID;
@@ -3032,7 +3034,7 @@ static struct udma_match_data am654_mcu_data = {
static struct udma_match_data j721e_main_data = {
.psil_base = 0x1000,
.enable_memcpy_support = true,
- .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST,
+ .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
.statictr_z_mask = GENMASK(23, 0),
.rchan_oes_offset = 0x400,
.tpl_levels = 3,
@@ -3046,7 +3048,7 @@ static struct udma_match_data j721e_main_data = {
static struct udma_match_data j721e_mcu_data = {
.psil_base = 0x6000,
.enable_memcpy_support = false, /* MEM_TO_MEM is slow via MCU UDMA */
- .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST,
+ .flags = UDMA_FLAG_PDMA_ACC32 | UDMA_FLAG_PDMA_BURST | UDMA_FLAG_TDTYPE,
.statictr_z_mask = GENMASK(23, 0),
.rchan_oes_offset = 0x400,
.tpl_levels = 2,
Set the TDTYPE if it is supported on the platform (j721e) which will cause UDMAP to wait for the remote peer to finish the teardown before returning the teardown completed message. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/dma/ti/k3-udma.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)