new file mode 100644
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/adi,ad242x-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Analog Devices AD242x GPIO controller
+
+maintainers:
+ - Daniel Mack <daniel@zonque.org>
+
+description: |
+ This module is part of the AD242x MFD device. For more details and an example
+ refer to Documentation/devicetree/bindings/mfd/ad242x.yaml.
+
+properties:
+ compatible:
+ enum:
+ - adi,ad2428w-gpio
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ gpio-over-distance:
+ type: object
+ description: |
+ Sub-node to configure pins as 'GPIO over distance'.
+ Pins in this mode are not accessible as regular GPIOs; instead, their
+ state is transparantly mirrored between one or multiple nodes.
+
+ Each child node of the 'gpio-over-distance' node describes one pin
+ that is to be configured in 'over distance' mode
+
+ properties:
+ pin:
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ adi,virtual-port-mask:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ The virtual port mask to assign this GPIO to.
+ Multiple GPIOs can use the same virtual port to link them
+ together. Refer to the datasheet for the details.
+
+ adi,gpio-output:
+ type: boolean
+ description: Configures this GPIO as output. Defaults to input mode.
+
+ adi,gpio-inverted:
+ type: boolean
+ description: Inverts the GPIO value
+
+ required:
+ - reg
+ - adi,virtual-port-mask
+
+required:
+ - compatible
+ - '#gpio-cells'
+ - gpio-controller
This device must be place as a sub-device of an AD242x MFD node. Signed-off-by: Daniel Mack <daniel@zonque.org> --- .../bindings/gpio/adi,ad242x-gpio.yaml | 65 +++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/adi,ad242x-gpio.yaml