[net-next,3/6] dt-bindings: net: dsa: add new MT7531 binding to support MT7531
diff mbox series

Message ID 1c382fd916b66bfe3ce8ef18c12f954dbcbddbbc.1575914275.git.landen.chao@mediatek.com
State New
Headers show
Series
  • net-next: dsa: mt7530: add support for MT7531
Related show

Commit Message

Landen Chao Dec. 10, 2019, 8:14 a.m. UTC
Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
---
 .../devicetree/bindings/net/dsa/mt7530.txt    | 77 ++++++++++++++++++-
 1 file changed, 74 insertions(+), 3 deletions(-)

Comments

Andrew Lunn Dec. 10, 2019, 4:20 p.m. UTC | #1
> +Example 4:
> +
> +&eth {
> +	gmac0: mac@0 {
> +		compatible = "mediatek,eth-mac";
> +		reg = <0>;
> +		phy-mode = "2500base-x";
> +
> +		fixed-link {
> +			speed = <1000>;
> +			full-duplex;
> +			pause;
> +		};
> +	};

2500Base-X, but fixed link speed 1000?

> +				port@6 {
> +					reg = <6>;
> +					label = "cpu";
> +					ethernet = <&gmac0>;
> +					phy-mode = "2500base-x";
> +
> +					fixed-link {
> +						speed = <1000>;
> +						full-duplex;
> +						pause;
> +					};

Same here!

     Andrew
Landen Chao Dec. 11, 2019, 2:10 p.m. UTC | #2
Hi Andrew,

On Wed, 2019-12-11 at 00:20 +0800, Andrew Lunn wrote:
> > +Example 4:
> > +
> > +&eth {
> > +	gmac0: mac@0 {
> > +		compatible = "mediatek,eth-mac";
> > +		reg = <0>;
> > +		phy-mode = "2500base-x";
> > +
> > +		fixed-link {
> > +			speed = <1000>;
> > +			full-duplex;
> > +			pause;
> > +		};
> > +	};
> 
> 2500Base-X, but fixed link speed 1000?
fixed-link speed should be 2500. I will update it.
> 
> > +				port@6 {
> > +					reg = <6>;
> > +					label = "cpu";
> > +					ethernet = <&gmac0>;
> > +					phy-mode = "2500base-x";
> > +
> > +					fixed-link {
> > +						speed = <1000>;
> > +						full-duplex;
> > +						pause;
> > +					};
> 
> Same here!
I will update it or remove fixed-link block as the discussion in dts
thread.
> 
>      Andrew

regards Landen
Florian Fainelli Dec. 12, 2019, 3:46 a.m. UTC | #3
On 12/10/2019 12:14 AM, Landen Chao wrote:
> Add devicetree binding to support the compatible mt7531 switch as used
> in the MediaTek MT7531 switch.
> 
> Signed-off-by: Sean Wang <sean.wang@mediatek.com>
> Signed-off-by: Landen Chao <landen.chao@mediatek.com>

With the comments from Andrew fixed, this looks good to me.

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index c5ed5d25f642..dc226a4e402a 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -5,6 +5,7 @@  Required properties:
 
 - compatible: may be compatible = "mediatek,mt7530"
 	or compatible = "mediatek,mt7621"
+	or compatible = "mediatek,mt7531"
 - #address-cells: Must be 1.
 - #size-cells: Must be 0.
 - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
@@ -32,10 +33,13 @@  Required properties for the child nodes within ports container:
 
 - reg: Port address described must be 6 for CPU port and from 0 to 5 for
 	user ports.
-- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-	 "cpu".
+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
+	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
+	must be either "trgmii" or "rgmii"
+	If compatible mediatek,mt7531 is set,
+	must be either "sgmii", "1000base-x" or "2500base-x"
 
-Port 5 of the switch is muxed between:
+Port 5 of mt7530 and mt7621 switch is muxed between:
 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
    of the SOC. Used in many setups where port 0/4 becomes the WAN port.
@@ -308,3 +312,70 @@  Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
 		};
 	};
 };
+
+Example 4:
+
+&eth {
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	&mdio0 {
+		switch@0 {
+			compatible = "mediatek,mt7531";
+			reg = <0>;
+			reset-gpios = <&pio 54 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "2500base-x";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};