[07/10] tty: serial: samsung_tty: use standard debugging macros
diff mbox series

Message ID 20191210143706.3928480-7-gregkh@linuxfoundation.org
State Not Applicable
Headers show
Series
  • [01/10] tty: serial: samsung: allow driver to be built by anyone
Related show

Commit Message

Greg KH Dec. 10, 2019, 2:37 p.m. UTC
The dbg() macro for the driver is not needed at all, all drivers should
use the common dynamic debugging infrastructure, not roll their own.  So
delete the custom macro and convert the driver to use dev_dbg() instead,
providing a lot more information than the previous macro provided.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Hyunki Koo <kkoos00@naver.com>
Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
Cc: Shinbeom Choi <sbeom.choi@samsung.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung_tty.c | 78 ++++++++++++--------------------
 1 file changed, 30 insertions(+), 48 deletions(-)

Comments

Krzysztof Kozlowski Dec. 10, 2019, 3:10 p.m. UTC | #1
On Tue, Dec 10, 2019 at 03:37:03PM +0100, Greg Kroah-Hartman wrote:
> The dbg() macro for the driver is not needed at all, all drivers should
> use the common dynamic debugging infrastructure, not roll their own.  So
> delete the custom macro and convert the driver to use dev_dbg() instead,
> providing a lot more information than the previous macro provided.
> 

Since now we have early console this should be functionally equal and
makes sense.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

Patch
diff mbox series

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 37749f09066d..12f6b2872076 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -46,28 +46,6 @@ 
 #include <linux/of.h>
 #include <asm/irq.h>
 
-#if	defined(CONFIG_SERIAL_SAMSUNG_DEBUG) &&	\
-	!defined(MODULE)
-
-extern void printascii(const char *);
-
-__printf(1, 2)
-static void dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vscnprintf(buff, sizeof(buff), fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-#else
-#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
-#endif
-
 /* UART name and device definitions */
 
 #define S3C24XX_SERIAL_NAME	"ttySAC"
@@ -517,7 +495,7 @@  static void s3c24xx_serial_stop_rx(struct uart_port *port)
 	unsigned int received;
 
 	if (rx_enabled(port)) {
-		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
+		dev_dbg(port->dev, "stopping rx\n");
 		if (s3c24xx_serial_has_interrupt_mask(port))
 			s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
 					S3C64XX_UINTM);
@@ -768,12 +746,13 @@  static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		port->icount.rx++;
 
 		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
-			dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
-			    ch, uerstat);
+			dev_dbg(port->dev,
+				"rxerr: port ch=0x%02x, rxs=0x%08x\n",
+				ch, uerstat);
 
 			/* check for break */
 			if (uerstat & S3C2410_UERSTAT_BREAK) {
-				dbg("break!\n");
+				dev_dbg(port->dev, "break!\n");
 				port->icount.brk++;
 				if (uart_handle_break(port))
 					continue; /* Ignore character */
@@ -1148,7 +1127,7 @@  static int s3c24xx_serial_startup(struct uart_port *port)
 
 	ourport->rx_claimed = 1;
 
-	dbg("requesting tx irq...\n");
+	dev_dbg(port->dev, "requesting tx irq...\n");
 
 	tx_enabled(port) = 1;
 
@@ -1433,29 +1412,30 @@  static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		if (cfg->has_fracval) {
 			udivslot = (div & 15);
-			dbg("fracval = %04x\n", udivslot);
+			dev_dbg(port->dev, "fracval = %04x\n", udivslot);
 		} else {
 			udivslot = udivslot_table[div & 15];
-			dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+			dev_dbg(port->dev, "udivslot = %04x (div %d)\n",
+				udivslot, div & 15);
 		}
 	}
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
-		dbg("config: 5bits/char\n");
+		dev_dbg(port->dev, "config: 5bits/char\n");
 		ulcon = S3C2410_LCON_CS5;
 		break;
 	case CS6:
-		dbg("config: 6bits/char\n");
+		dev_dbg(port->dev, "config: 6bits/char\n");
 		ulcon = S3C2410_LCON_CS6;
 		break;
 	case CS7:
-		dbg("config: 7bits/char\n");
+		dev_dbg(port->dev, "config: 7bits/char\n");
 		ulcon = S3C2410_LCON_CS7;
 		break;
 	case CS8:
 	default:
-		dbg("config: 8bits/char\n");
+		dev_dbg(port->dev, "config: 8bits/char\n");
 		ulcon = S3C2410_LCON_CS8;
 		break;
 	}
@@ -1477,8 +1457,9 @@  static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
-	    ulcon, quot, udivslot);
+	dev_dbg(port->dev,
+		"setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+		ulcon, quot, udivslot);
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
@@ -1499,10 +1480,11 @@  static void s3c24xx_serial_set_termios(struct uart_port *port,
 	if (ourport->info->has_divslot)
 		wr_regl(port, S3C2443_DIVSLOT, udivslot);
 
-	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
-	    rd_regl(port, S3C2410_ULCON),
-	    rd_regl(port, S3C2410_UCON),
-	    rd_regl(port, S3C2410_UFCON));
+	dev_dbg(port->dev,
+		"uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+		rd_regl(port, S3C2410_ULCON),
+		rd_regl(port, S3C2410_UCON),
+		rd_regl(port, S3C2410_UFCON));
 
 	/*
 	 * Update the per-port timeout.
@@ -1877,7 +1859,7 @@  static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	port->uartclk = 1;
 
 	if (cfg->uart_flags & UPF_CONS_FLOW) {
-		dbg("s3c24xx_serial_init_port: enabling flow control\n");
+		dev_dbg(port->dev, "enabling flow control\n");
 		port->flags |= UPF_CONS_FLOW;
 	}
 
@@ -1889,7 +1871,7 @@  static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		return -EINVAL;
 	}
 
-	dbg("resource %pR)\n", res);
+	dev_dbg(port->dev, "resource %pR)\n", res);
 
 	port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
 	if (!port->membase) {
@@ -1951,9 +1933,9 @@  static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		wr_regl(port, S3C64XX_UINTSP, 0xf);
 	}
 
-	dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
-	    &port->mapbase, port->membase, port->irq,
-	    ourport->rx_irq, ourport->tx_irq, port->uartclk);
+	dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
+		&port->mapbase, port->membase, port->irq,
+		ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
@@ -2034,7 +2016,7 @@  static int s3c24xx_serial_probe(struct platform_device *pdev)
 	ourport->min_dma_size = max_t(int, ourport->port.fifosize,
 				    dma_get_cache_alignment());
 
-	dbg("%s: initialising port %p...\n", __func__, ourport);
+	dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport);
 
 	ret = s3c24xx_serial_init_port(ourport, pdev);
 	if (ret < 0)
@@ -2048,7 +2030,7 @@  static int s3c24xx_serial_probe(struct platform_device *pdev)
 		}
 	}
 
-	dbg("%s: adding port\n", __func__);
+	dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
 	platform_set_drvdata(pdev, &ourport->port);
 
@@ -2303,7 +2285,7 @@  s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 			rate = 1;
 
 		*baud = rate / (16 * (ubrdiv + 1));
-		dbg("calculated baud %d\n", *baud);
+		dev_dbg(port->dev, "calculated baud %d\n", *baud);
 	}
 
 }
@@ -2341,7 +2323,7 @@  s3c24xx_serial_console_setup(struct console *co, char *options)
 	else
 		s3c24xx_serial_get_options(port, &baud, &parity, &bits);
 
-	dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
+	dev_dbg(port->dev, "baud %d\n", baud);
 
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }