[05/10] tty: serial: samsung_tty: delete samsung.h
diff mbox series

Message ID 20191210143706.3928480-5-gregkh@linuxfoundation.org
State Not Applicable
Headers show
Series
  • [01/10] tty: serial: samsung: allow driver to be built by anyone
Related show

Commit Message

Greg Kroah-Hartman Dec. 10, 2019, 2:37 p.m. UTC
There is no need for a .h file for a single .c file, so just move all of
the content of samsung.h into samsung_tty.c

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Hyunki Koo <kkoos00@naver.com>
Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
Cc: Shinbeom Choi <sbeom.choi@samsung.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/samsung.h     | 144 -------------------------------
 drivers/tty/serial/samsung_tty.c | 133 +++++++++++++++++++++++++++-
 2 files changed, 130 insertions(+), 147 deletions(-)
 delete mode 100644 drivers/tty/serial/samsung.h

Comments

Krzysztof Kozlowski Dec. 10, 2019, 2:52 p.m. UTC | #1
On Tue, Dec 10, 2019 at 03:37:01PM +0100, Greg Kroah-Hartman wrote:
> There is no need for a .h file for a single .c file, so just move all of
> the content of samsung.h into samsung_tty.c
> 
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Krzysztof Kozlowski <krzk@kernel.org>
> Cc: Hyunki Koo <kkoos00@naver.com>
> Cc: HYUN-KI KOO <hyunki00.koo@samsung.com>
> Cc: Shinbeom Choi <sbeom.choi@samsung.com>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-samsung-soc@vger.kernel.org
> Cc: linux-serial@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> ---
>  drivers/tty/serial/samsung.h     | 144 -------------------------------
>  drivers/tty/serial/samsung_tty.c | 133 +++++++++++++++++++++++++++-
>  2 files changed, 130 insertions(+), 147 deletions(-)
>  delete mode 100644 drivers/tty/serial/samsung.h

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

Patch
diff mbox series

diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
deleted file mode 100644
index 7255ef287857..000000000000
--- a/drivers/tty/serial/samsung.h
+++ /dev/null
@@ -1,144 +0,0 @@ 
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SAMSUNG_H
-#define __SAMSUNG_H
-
-/*
- * Driver for Samsung SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- */
-
-#include <linux/dmaengine.h>
-
-struct s3c24xx_uart_info {
-	char			*name;
-	unsigned int		type;
-	unsigned int		fifosize;
-	unsigned long		rx_fifomask;
-	unsigned long		rx_fifoshift;
-	unsigned long		rx_fifofull;
-	unsigned long		tx_fifomask;
-	unsigned long		tx_fifoshift;
-	unsigned long		tx_fifofull;
-	unsigned int		def_clk_sel;
-	unsigned long		num_clks;
-	unsigned long		clksel_mask;
-	unsigned long		clksel_shift;
-
-	/* uart port features */
-
-	unsigned int		has_divslot:1;
-};
-
-struct s3c24xx_serial_drv_data {
-	struct s3c24xx_uart_info	*info;
-	struct s3c2410_uartcfg		*def_cfg;
-	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
-};
-
-struct s3c24xx_uart_dma {
-	unsigned int			rx_chan_id;
-	unsigned int			tx_chan_id;
-
-	struct dma_slave_config		rx_conf;
-	struct dma_slave_config		tx_conf;
-
-	struct dma_chan			*rx_chan;
-	struct dma_chan			*tx_chan;
-
-	dma_addr_t			rx_addr;
-	dma_addr_t			tx_addr;
-
-	dma_cookie_t			rx_cookie;
-	dma_cookie_t			tx_cookie;
-
-	char				*rx_buf;
-
-	dma_addr_t			tx_transfer_addr;
-
-	size_t				rx_size;
-	size_t				tx_size;
-
-	struct dma_async_tx_descriptor	*tx_desc;
-	struct dma_async_tx_descriptor	*rx_desc;
-
-	int				tx_bytes_requested;
-	int				rx_bytes_requested;
-};
-
-struct s3c24xx_uart_port {
-	unsigned char			rx_claimed;
-	unsigned char			tx_claimed;
-	unsigned int			pm_level;
-	unsigned long			baudclk_rate;
-	unsigned int			min_dma_size;
-
-	unsigned int			rx_irq;
-	unsigned int			tx_irq;
-
-	unsigned int			tx_in_progress;
-	unsigned int			tx_mode;
-	unsigned int			rx_mode;
-
-	struct s3c24xx_uart_info	*info;
-	struct clk			*clk;
-	struct clk			*baudclk;
-	struct uart_port		port;
-	struct s3c24xx_serial_drv_data	*drv_data;
-
-	/* reference to platform data */
-	struct s3c2410_uartcfg		*cfg;
-
-	struct s3c24xx_uart_dma		*dma;
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-	struct notifier_block		freq_transition;
-#endif
-};
-
-/* conversion functions */
-
-#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
-
-/* register access controls */
-
-#define portaddr(port, reg) ((port)->membase + (reg))
-#define portaddrl(port, reg) \
-	((unsigned long *)(unsigned long)((port)->membase + (reg)))
-
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
-#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
-
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
-#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
-
-/* Byte-order aware bit setting/clearing functions. */
-
-static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
-				   unsigned int reg)
-{
-	unsigned long flags;
-	u32 val;
-
-	local_irq_save(flags);
-	val = rd_regl(port, reg);
-	val |= (1 << idx);
-	wr_regl(port, reg, val);
-	local_irq_restore(flags);
-}
-
-static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
-				     unsigned int reg)
-{
-	unsigned long flags;
-	u32 val;
-
-	local_irq_save(flags);
-	val = rd_regl(port, reg);
-	val &= ~(1 << idx);
-	wr_regl(port, reg, val);
-	local_irq_restore(flags);
-}
-
-#endif
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 67c5a84d0a26..1a3bf5879344 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -44,11 +44,8 @@ 
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/of.h>
-
 #include <asm/irq.h>
 
-#include "samsung.h"
-
 #if	defined(CONFIG_SERIAL_SAMSUNG_DEBUG) &&	\
 	!defined(MODULE)
 
@@ -89,6 +86,136 @@  static void dbg(const char *fmt, ...)
 /* flag to ignore all characters coming in */
 #define RXSTAT_DUMMY_READ (0x10000000)
 
+struct s3c24xx_uart_info {
+	char			*name;
+	unsigned int		type;
+	unsigned int		fifosize;
+	unsigned long		rx_fifomask;
+	unsigned long		rx_fifoshift;
+	unsigned long		rx_fifofull;
+	unsigned long		tx_fifomask;
+	unsigned long		tx_fifoshift;
+	unsigned long		tx_fifofull;
+	unsigned int		def_clk_sel;
+	unsigned long		num_clks;
+	unsigned long		clksel_mask;
+	unsigned long		clksel_shift;
+
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+};
+
+struct s3c24xx_serial_drv_data {
+	struct s3c24xx_uart_info	*info;
+	struct s3c2410_uartcfg		*def_cfg;
+	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
+struct s3c24xx_uart_dma {
+	unsigned int			rx_chan_id;
+	unsigned int			tx_chan_id;
+
+	struct dma_slave_config		rx_conf;
+	struct dma_slave_config		tx_conf;
+
+	struct dma_chan			*rx_chan;
+	struct dma_chan			*tx_chan;
+
+	dma_addr_t			rx_addr;
+	dma_addr_t			tx_addr;
+
+	dma_cookie_t			rx_cookie;
+	dma_cookie_t			tx_cookie;
+
+	char				*rx_buf;
+
+	dma_addr_t			tx_transfer_addr;
+
+	size_t				rx_size;
+	size_t				tx_size;
+
+	struct dma_async_tx_descriptor	*tx_desc;
+	struct dma_async_tx_descriptor	*rx_desc;
+
+	int				tx_bytes_requested;
+	int				rx_bytes_requested;
+};
+
+struct s3c24xx_uart_port {
+	unsigned char			rx_claimed;
+	unsigned char			tx_claimed;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+	unsigned int			min_dma_size;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
+
+	unsigned int			tx_in_progress;
+	unsigned int			tx_mode;
+	unsigned int			rx_mode;
+
+	struct s3c24xx_uart_info	*info;
+	struct clk			*clk;
+	struct clk			*baudclk;
+	struct uart_port		port;
+	struct s3c24xx_serial_drv_data	*drv_data;
+
+	/* reference to platform data */
+	struct s3c2410_uartcfg		*cfg;
+
+	struct s3c24xx_uart_dma		*dma;
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+	struct notifier_block		freq_transition;
+#endif
+};
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+#define portaddrl(port, reg) \
+	((unsigned long *)(unsigned long)((port)->membase + (reg)))
+
+#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
+
+/* Byte-order aware bit setting/clearing functions. */
+
+static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
+				   unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val |= (1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
+static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
+				     unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val &= ~(1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
 {
 	return container_of(port, struct s3c24xx_uart_port, port);