| Message ID | 20191210145345.11616-4-sudeep.holla@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | firmware: arm_scmi: Add support for multiple device per protocol | expand |
On 10/12/2019 14:53, Sudeep Holla wrote: > The scmi bus now supports adding multiple devices per protocol, > and since scmi_protocol_init is called for each scmi device created, > we must avoid allocating protocol private data and initialising the > protocol itself if it is already initialised. > > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > --- Wouldn't be better to add some kind of per-protocol 'initialized' flag somewhere in the bus abstraction so that the protocol_id itself could be marked as initialized once bus::scmi_protocol_init() completes successfully so that we could just skip the invocation itself of bus::scmi_protocol_init() for all the protocols already detected as initialized ? Or, if not a flag, maybe deactivating the registered protocol init function itself once it has been successfully called once .....something along the lines of: diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c index 7a30952b463d..a551a00586c6 100644 --- a/drivers/firmware/arm_scmi/bus.c +++ b/drivers/firmware/arm_scmi/bus.c @@ -73,6 +73,8 @@ static int scmi_dev_probe(struct device *dev) ret = scmi_protocol_init(scmi_dev->protocol_id, scmi_dev->handle); if (ret) return ret; + idr_replace(&scmi_protocols, dummy_return_0_callback, + scmi_dev->protocol_id); return scmi_drv->probe(scmi_dev); [not really tested eh ... :D] This way we can drop this patch as a whole and avoid any future needs to remember to add this same sort of logic in the next XYZ protocol implementation. Cheers Cristian > drivers/firmware/arm_scmi/clock.c | 3 +++ > drivers/firmware/arm_scmi/perf.c | 3 +++ > drivers/firmware/arm_scmi/power.c | 3 +++ > drivers/firmware/arm_scmi/reset.c | 3 +++ > drivers/firmware/arm_scmi/sensors.c | 3 +++ > 5 files changed, 15 insertions(+) > > diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c > index 32526a793f3a..922b22aaaf84 100644 > --- a/drivers/firmware/arm_scmi/clock.c > +++ b/drivers/firmware/arm_scmi/clock.c > @@ -316,6 +316,9 @@ static int scmi_clock_protocol_init(struct scmi_handle *handle) > int clkid, ret; > struct clock_info *cinfo; > > + if (handle->clk_ops && handle->clk_priv) > + return 0; /* initialised already for the first device */ > + > scmi_version_get(handle, SCMI_PROTOCOL_CLOCK, &version); > > dev_dbg(handle->dev, "Clock Version %d.%d\n", > diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c > index 601af4edad5e..55c2a4c21ccb 100644 > --- a/drivers/firmware/arm_scmi/perf.c > +++ b/drivers/firmware/arm_scmi/perf.c > @@ -710,6 +710,9 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle) > u32 version; > struct scmi_perf_info *pinfo; > > + if (handle->perf_ops && handle->perf_priv) > + return 0; /* initialised already for the first device */ > + > scmi_version_get(handle, SCMI_PROTOCOL_PERF, &version); > > dev_dbg(handle->dev, "Performance Version %d.%d\n", > diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c > index 5abef7079c0a..9a7593238b8f 100644 > --- a/drivers/firmware/arm_scmi/power.c > +++ b/drivers/firmware/arm_scmi/power.c > @@ -185,6 +185,9 @@ static int scmi_power_protocol_init(struct scmi_handle *handle) > u32 version; > struct scmi_power_info *pinfo; > > + if (handle->power_ops && handle->power_priv) > + return 0; /* initialised already for the first device */ > + > scmi_version_get(handle, SCMI_PROTOCOL_POWER, &version); > > dev_dbg(handle->dev, "Power Version %d.%d\n", > diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c > index ab42c21c5517..809dc8faee1e 100644 > --- a/drivers/firmware/arm_scmi/reset.c > +++ b/drivers/firmware/arm_scmi/reset.c > @@ -195,6 +195,9 @@ static int scmi_reset_protocol_init(struct scmi_handle *handle) > u32 version; > struct scmi_reset_info *pinfo; > > + if (handle->reset_ops && handle->reset_priv) > + return 0; /* initialised already for the first device */ > + > scmi_version_get(handle, SCMI_PROTOCOL_RESET, &version); > > dev_dbg(handle->dev, "Reset Version %d.%d\n", > diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c > index a400ea805fc2..b7f92c37c8a4 100644 > --- a/drivers/firmware/arm_scmi/sensors.c > +++ b/drivers/firmware/arm_scmi/sensors.c > @@ -276,6 +276,9 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) > u32 version; > struct sensors_info *sinfo; > > + if (handle->sensor_ops && handle->sensor_priv) > + return 0; /* initialised already for the first device */ > + > scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); > > dev_dbg(handle->dev, "Sensor Version %d.%d\n", > -- > 2.17.1 >
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c index 32526a793f3a..922b22aaaf84 100644 --- a/drivers/firmware/arm_scmi/clock.c +++ b/drivers/firmware/arm_scmi/clock.c @@ -316,6 +316,9 @@ static int scmi_clock_protocol_init(struct scmi_handle *handle) int clkid, ret; struct clock_info *cinfo; + if (handle->clk_ops && handle->clk_priv) + return 0; /* initialised already for the first device */ + scmi_version_get(handle, SCMI_PROTOCOL_CLOCK, &version); dev_dbg(handle->dev, "Clock Version %d.%d\n", diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index 601af4edad5e..55c2a4c21ccb 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -710,6 +710,9 @@ static int scmi_perf_protocol_init(struct scmi_handle *handle) u32 version; struct scmi_perf_info *pinfo; + if (handle->perf_ops && handle->perf_priv) + return 0; /* initialised already for the first device */ + scmi_version_get(handle, SCMI_PROTOCOL_PERF, &version); dev_dbg(handle->dev, "Performance Version %d.%d\n", diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c index 5abef7079c0a..9a7593238b8f 100644 --- a/drivers/firmware/arm_scmi/power.c +++ b/drivers/firmware/arm_scmi/power.c @@ -185,6 +185,9 @@ static int scmi_power_protocol_init(struct scmi_handle *handle) u32 version; struct scmi_power_info *pinfo; + if (handle->power_ops && handle->power_priv) + return 0; /* initialised already for the first device */ + scmi_version_get(handle, SCMI_PROTOCOL_POWER, &version); dev_dbg(handle->dev, "Power Version %d.%d\n", diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c index ab42c21c5517..809dc8faee1e 100644 --- a/drivers/firmware/arm_scmi/reset.c +++ b/drivers/firmware/arm_scmi/reset.c @@ -195,6 +195,9 @@ static int scmi_reset_protocol_init(struct scmi_handle *handle) u32 version; struct scmi_reset_info *pinfo; + if (handle->reset_ops && handle->reset_priv) + return 0; /* initialised already for the first device */ + scmi_version_get(handle, SCMI_PROTOCOL_RESET, &version); dev_dbg(handle->dev, "Reset Version %d.%d\n", diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index a400ea805fc2..b7f92c37c8a4 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -276,6 +276,9 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) u32 version; struct sensors_info *sinfo; + if (handle->sensor_ops && handle->sensor_priv) + return 0; /* initialised already for the first device */ + scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); dev_dbg(handle->dev, "Sensor Version %d.%d\n",
The scmi bus now supports adding multiple devices per protocol, and since scmi_protocol_init is called for each scmi device created, we must avoid allocating protocol private data and initialising the protocol itself if it is already initialised. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- drivers/firmware/arm_scmi/clock.c | 3 +++ drivers/firmware/arm_scmi/perf.c | 3 +++ drivers/firmware/arm_scmi/power.c | 3 +++ drivers/firmware/arm_scmi/reset.c | 3 +++ drivers/firmware/arm_scmi/sensors.c | 3 +++ 5 files changed, 15 insertions(+) -- 2.17.1