diff mbox series

[v3,3/7] usb: musb: jz4740: Add support for DMA

Message ID 20191210171110.62141-3-paul@crapouillou.net (mailing list archive)
State New, archived
Headers show
Series [v3,1/7] usb: musb: dma: Correct parameter passed to IRQ handler | expand

Commit Message

Paul Cercueil Dec. 10, 2019, 5:11 p.m. UTC 
Add support for using the DMA channels built into the Inventra IP.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
---

Notes:
    v2: Rebase on 5.4-rc4
    v3: Rebase on 5.5-rc1

 drivers/usb/musb/Kconfig  |  2 +-
 drivers/usb/musb/jz4740.c | 21 +++++++++++++++------
 2 files changed, 16 insertions(+), 7 deletions(-)

Comments

Bin Liu Dec. 11, 2019, 6:52 p.m. UTC | #1 
On Tue, Dec 10, 2019 at 06:11:06PM +0100, Paul Cercueil wrote:
> Add support for using the DMA channels built into the Inventra IP.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>
> ---

Queued for usb-next. Thanks.

-Bin.
diff mbox series

Patch

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 52f8e2b57ad5..210e4844c92a 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -142,7 +142,7 @@  config USB_UX500_DMA
 
 config USB_INVENTRA_DMA
 	bool 'Inventra'
-	depends on USB_MUSB_OMAP2PLUS
+	depends on USB_MUSB_OMAP2PLUS || USB_MUSB_JZ4740
 	help
 	  Enable DMA transfers using Mentor's engine.
 
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 5261f8dfedec..bbecfdee6ea1 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -25,11 +25,14 @@  struct jz4740_glue {
 static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long   flags;
-	irqreturn_t     retval = IRQ_NONE;
+	irqreturn_t     retval = IRQ_NONE, retval_dma = IRQ_NONE;
 	struct musb     *musb = __hci;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
+	if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
+		retval_dma = musbhs_dma_controller_irq(musb->dma_controller);
+
 	musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
 	musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
 	musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
@@ -47,7 +50,10 @@  static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
 
 	spin_unlock_irqrestore(&musb->lock, flags);
 
-	return retval;
+	if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
+		return IRQ_HANDLED;
+
+	return IRQ_NONE;
 }
 
 static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
@@ -91,18 +97,19 @@  static int jz4740_musb_init(struct musb *musb)
 	musb->dyn_fifo = true;
 
 	musb->isr = jz4740_musb_interrupt;
+	musb->dma_share_usb_irq = true;
 
 	return 0;
 }
 
-/*
- * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA,
- * so let's not set up the dma function pointers yet.
- */
 static const struct musb_platform_ops jz4740_musb_ops = {
 	.quirks		= MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
 	.fifo_mode	= 2,
 	.init		= jz4740_musb_init,
+#ifdef CONFIG_USB_INVENTRA_DMA
+	.dma_init	= musbhs_dma_controller_create,
+	.dma_exit	= musbhs_dma_controller_destroy,
+#endif
 };
 
 static int jz4740_probe(struct platform_device *pdev)
@@ -137,6 +144,8 @@  static int jz4740_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &musb->dev.coherent_dma_mask;
+	musb->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;