[v9,2/6] arm: dts: mt2701: Add usb2 device nodes
diff mbox series

Message ID 20191211015446.11477-3-min.guo@mediatek.com
State New
Headers show
Series
  • Add MediaTek MUSB Controller Driver
Related show

Commit Message

Min Guo Dec. 11, 2019, 1:54 a.m. UTC
From: Min Guo <min.guo@mediatek.com>

Add musb nodes and usb2 phy nodes for MT2701

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
changes in v9:
1. Add usb-role-switch
2. Remove label of usb connector child node
3. Change usb connector child node compatible as "gpio-usb-b-connector", "usb-b-connector";

changes in v8:
1. no changes

changes in v7:
1. Change usb connector child node compatible as "gpio-usb-b-connector" 

changes in v6:
1. Modify usb connector child node

changes in v5:
1. Add usb connector child node

changes in v4:
1. no changes

changes in v3:
1. no changes

changes in v2:
1. Remove phy-names
---
 arch/arm/boot/dts/mt2701-evb.dts | 21 ++++++++++++++++++++
 arch/arm/boot/dts/mt2701.dtsi    | 33 ++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

Comments

Bin Liu Dec. 18, 2019, 3:39 p.m. UTC | #1
Hi Matthias,

On Wed, Dec 11, 2019 at 09:54:42AM +0800, min.guo@mediatek.com wrote:
> From: Min Guo <min.guo@mediatek.com>
> 
> Add musb nodes and usb2 phy nodes for MT2701
> 
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
> changes in v9:
> 1. Add usb-role-switch
> 2. Remove label of usb connector child node
> 3. Change usb connector child node compatible as "gpio-usb-b-connector", "usb-b-connector";
> 
> changes in v8:
> 1. no changes
> 
> changes in v7:
> 1. Change usb connector child node compatible as "gpio-usb-b-connector" 
> 
> changes in v6:
> 1. Modify usb connector child node
> 
> changes in v5:
> 1. Add usb connector child node
> 
> changes in v4:
> 1. no changes
> 
> changes in v3:
> 1. no changes
> 
> changes in v2:
> 1. Remove phy-names
> ---
>  arch/arm/boot/dts/mt2701-evb.dts | 21 ++++++++++++++++++++
>  arch/arm/boot/dts/mt2701.dtsi    | 33 ++++++++++++++++++++++++++++++++
>  2 files changed, 54 insertions(+)

Can I have your ACK so I can queue this? or please let me know if you
want to take it in your tree. Thanks.

-Bin.

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index be0edb3dae6c..844ed3f971fe 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -6,6 +6,7 @@ 
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt2701.dtsi"
 
 / {
@@ -60,6 +61,15 @@  backlight_lcd: backlight_lcd {
 		>;
 		default-brightness-level = <9>;
 	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &auxadc {
@@ -229,3 +239,14 @@  pins1 {
 &uart0 {
 	status = "okay";
 };
+
+&usb2 {
+	status = "okay";
+	usb-role-switch;
+	connector{
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 180377e56ef4..a6b1434e83fb 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -670,6 +670,39 @@  u3port1: usb-phy@1a244900 {
 		};
 	};
 
+	usb2: usb@11200000 {
+		compatible = "mediatek,mt2701-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy0: usb-phy@11210000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "okay";
+
+		u2port2: usb-phy@1a1c4800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
 	ethsys: syscon@1b000000 {
 		compatible = "mediatek,mt2701-ethsys", "syscon";
 		reg = <0 0x1b000000 0 0x1000>;