| Message ID | 157604271809.578515.1806500868635425865.stgit@magnolia (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | xfs: test xfs_scrub media scan | expand |
On Tue, Dec 10, 2019 at 09:38:38PM -0800, Darrick J. Wong wrote: > From: Darrick J. Wong <darrick.wong@oracle.com> > > Add new helpers to dmerror to provide for marking selected ranges > totally bad -- both reads and writes will fail. Create a new test for > xfs_scrub to check that it reports media errors correctly. > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> I hit assert failure when testing on v5.5-rc3+ kernel, is that an expected result? Both test failed in the same way. [ 192.610313] xfs filesystem being mounted at /mnt/scratch supports timestamps until 2038 (0x7fffffff) [ 193.149329] Buffer I/O error on dev dm-11, logical block 128, async page read [ 193.150173] Buffer I/O error on dev dm-11, logical block 129, async page read [ 193.151254] Buffer I/O error on dev dm-11, logical block 130, async page read [ 193.152173] Buffer I/O error on dev dm-11, logical block 131, async page read [ 193.152980] Buffer I/O error on dev dm-11, logical block 132, async page read [ 193.153935] Buffer I/O error on dev dm-11, logical block 133, async page read [ 193.154869] Buffer I/O error on dev dm-11, logical block 134, async page read [ 193.155800] Buffer I/O error on dev dm-11, logical block 135, async page read [ 193.249751] XFS: Assertion failed: !(sc->sm->sm_flags & XFS_SCRUB_IFLAG_REPAIR), file: fs/xfs/scrub/repair.h, line: 78 [ 193.255979] ------------[ cut here ]------------ [ 193.258406] kernel BUG at fs/xfs/xfs_message.c:110! [ 193.260996] invalid opcode: 0000 [#1] SMP PTI [ 193.263323] CPU: 0 PID: 5613 Comm: xfs_scrub Not tainted 5.5.0-rc3+ #44 [ 193.266717] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 193.273736] RIP: 0010:assfail+0x23/0x28 [xfs] [ 193.276045] Code: 67 fc ff ff 0f 0b c3 0f 1f 44 00 00 41 89 c8 48 89 d1 48 89 f2 48 c7 c6 78 e9 8d c0 e8 82 f9 ff ff 80 3d 9a d7 08 00 00 74 02 <0f> 0b 0f 0b c3 48 8b 03 48 c7 c7 68 ee 8d c0 c6 05 0e 2b 0a 00 01 [ 193.284481] RSP: 0018:ffffac9540b7fbe0 EFLAGS: 00010202 [ 193.286297] RAX: 0000000000000000 RBX: ffffac9540b7fcc8 RCX: 0000000000000000 [ 193.288390] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffc08d144a [ 193.290235] RBP: ffffac9540b7fbf8 R08: 0000000000000000 R09: 0000000000000000 [ 193.292083] R10: 000000000000000a R11: f000000000000000 R12: 0000000000000000 [ 193.293589] R13: ffff90006701c000 R14: ffff900071746400 R15: ffff900071746558 [ 193.295068] FS: 00007f91892cc740(0000) GS:ffff900078c00000(0000) knlGS:0000000000000000 [ 193.296899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 193.297977] CR2: 0000000001ef0078 CR3: 0000000236050002 CR4: 00000000003606f0 [ 193.299234] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 193.300555] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 193.301805] Call Trace: [ 193.302296] xchk_setup_fs+0x35/0x40 [xfs] [ 193.302937] xfs_scrub_metadata+0x23d/0x480 [xfs] [ 193.303658] xfs_ioc_scrub_metadata+0x50/0xa0 [xfs] [ 193.304417] xfs_file_ioctl+0xb23/0xc60 [xfs] [ 193.305075] ? pagevec_lru_move_fn+0xbd/0xe0 [ 193.305719] ? get_kernel_page+0x60/0x60 [ 193.306321] ? __lru_cache_add+0x62/0x80 [ 193.306922] ? __handle_mm_fault+0xc65/0x1930 [ 193.307553] do_vfs_ioctl+0x448/0x6c0 [ 193.308042] ? handle_mm_fault+0xc4/0x1f0 [ 193.308572] ksys_ioctl+0x5e/0x90 [ 193.309006] __x64_sys_ioctl+0x16/0x20 [ 193.309501] do_syscall_64+0x5b/0x1d0 [ 193.309990] entry_SYSCALL_64_after_hwframe+0x44/0xa9 > --- > common/dmerror | 107 +++++++++++++++++++++++++++++++++++++++++- > tests/xfs/747 | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/xfs/747.out | 12 +++++ > tests/xfs/748 | 102 ++++++++++++++++++++++++++++++++++++++++ > tests/xfs/748.out | 5 ++ > tests/xfs/group | 2 + > 6 files changed, 363 insertions(+), 1 deletion(-) > create mode 100755 tests/xfs/747 > create mode 100644 tests/xfs/747.out > create mode 100755 tests/xfs/748 > create mode 100644 tests/xfs/748.out > > > diff --git a/common/dmerror b/common/dmerror > index ca1c7335..ee3051f1 100644 > --- a/common/dmerror > +++ b/common/dmerror > @@ -62,7 +62,7 @@ _dmerror_load_error_table() > $DMSETUP_PROG suspend $suspend_opt error-test > [ $? -ne 0 ] && _fail "dmsetup suspend failed" > > - $DMSETUP_PROG load error-test --table "$DMERROR_TABLE" > + echo "$DMERROR_TABLE" | $DMSETUP_PROG load error-test > load_res=$? > > $DMSETUP_PROG resume error-test > @@ -94,3 +94,108 @@ _dmerror_load_working_table() > [ $load_res -ne 0 ] && _fail "dmsetup failed to load error table" > [ $resume_res -ne 0 ] && _fail "dmsetup resume failed" > } > + > +# Given a list of (start, length) tuples on stdin, combine adjacent tuples into > +# larger ones and write the new list to stdout. > +__dmerror_combine_extents() > +{ > + awk 'BEGIN{start = 0; len = 0;}{ $AWK_PROG > +if (start + len == $1) { > + len += $2; > +} else { > + if (len > 0) > + printf("%d %d\n", start, len); > + start = $1; > + len = $2; > +} > +} END { > + if (len > 0) > + printf("%d %d\n", start, len); > +}' > +} > + > +# Given a block device, the name of a preferred dm target, the name of an > +# implied dm target, and a list of (start, len) tuples on stdin, create a new > +# dm table which maps each of the tuples to the preferred target and all other > +# areas to the implied dm target. > +__dmerror_recreate_map() > +{ > + local device="$1" > + local preferred_tgt="$2" > + local implied_tgt="$3" > + local size=$(blockdev --getsz "$device") > + > + awk -v device="$device" -v size=$size -v implied_tgt="$implied_tgt" \ Same here. > + -v preferred_tgt="$preferred_tgt" 'BEGIN{implied_start = 0;}{ > + extent_start = $1; > + extent_len = $2; > + > + if (extent_start > size) { > + extent_start = size; > + extent_len = 0; > + } else if (extent_start + extent_len > size) { > + extent_len = size - extent_start; > + } > + > + if (implied_start < extent_start) > + printf("%d %d %s %s %d\n", implied_start, > + extent_start - implied_start, implied_tgt, > + device, implied_start); > + printf("%d %d %s %s %d\n", extent_start, extent_len, preferred_tgt, > + device, extent_start); > + implied_start = extent_start + extent_len; > +}END{ > + if (implied_start < size) > + printf("%d %d %s %s %d\n", implied_start, size - implied_start, > + implied_tgt, device, implied_start); > +}' > +} > + > +# Update the dm error table so that the range (start, len) maps to the > +# preferred dm target, overriding anything that maps to the implied dm target. > +# This assumes that the only desired targets for this dm device are the > +# preferred and and implied targets. The optional fifth argument can be used > +# to change the underlying device. > +__dmerror_change() > +{ > + local start="$1" > + local len="$2" > + local preferred_tgt="$3" > + local implied_tgt="$4" > + local dm_backing_dev="$5" > + test -z "$dm_backing_dev" && dm_backing_dev="$SCRATCH_DEV" > + > + DMERROR_TABLE="$( (echo "$DMERROR_TABLE"; echo "$start $len $preferred_tgt") | \ > + awk -v type="$preferred_tgt" '{if ($3 == type) print $0;}' | \ Same here. > + sort -g | \ > + __dmerror_combine_extents | \ > + __dmerror_recreate_map "$dm_backing_dev" "$preferred_tgt" \ > + "$implied_tgt" )" > +} > + > +# Reset the dm error table to everything ok. The dm device itself must be > +# remapped by calling _dmerror_load_error_table. > +_dmerror_reset_table() > +{ > + DMERROR_TABLE="$DMLINEAR_TABLE" > +} > + > +# Update the dm error table so that IOs to the given range will return EIO. > +# The dm device itself must be remapped by calling _dmerror_load_error_table. > +_dmerror_mark_range_bad() > +{ > + local start="$1" > + local len="$2" > + > + __dmerror_change "$start" "$len" error linear > +} > + > +# Update the dm error table so that IOs to the given range will succeed. > +# The dm device itself must be remapped by calling _dmerror_load_error_table. > +_dmerror_mark_range_good() > +{ > + local start="$1" > + local len="$2" > + > + __dmerror_change "$start" "$len" linear error > +} > diff --git a/tests/xfs/747 b/tests/xfs/747 > new file mode 100755 > index 00000000..f5894411 > --- /dev/null > +++ b/tests/xfs/747 > @@ -0,0 +1,136 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0-or-newer > +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. > +# > +# FS QA Test No. 747 > +# > +# Check xfs_scrub's media scan can actually return diagnostic information for > +# media errors in file data extents. > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.error rm -f $tmp.* would be find. Otherwise files like $tmp.mkfs are still there. > + _dmerror_cleanup > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/fuzzy > +. ./common/filter > +. ./common/dmerror > + > +# real QA test starts here > +_supported_fs xfs > +_supported_os Linux > +_require_dm_target error > +_require_scratch_xfs_crc > +_require_scrub > + > +rm -f $seqres.full > + > +filter_scrub_errors() { > + _filter_scratch | sed -e "s/offset $((blksz * 2)) /offset 2FSB /g" \ > + -e "s/length $blksz.*/length 1FSB./g" > +} > + > +_scratch_mkfs > $tmp.mkfs > +_dmerror_init > +_dmerror_mount >> $seqres.full 2>&1 > + > +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" > + > +victim=$SCRATCH_MNT/a > +$XFS_IO_PROG -f -c "pwrite -S 0x58 0 1m" -c "fsync" $victim >> $seqres.full > +bmap_str="$($XFS_IO_PROG -c "bmap -elpv" $victim | grep "^[[:space:]]*0:")" > +echo "$bmap_str" >> $seqres.full > + > +phys="$(echo "$bmap_str" | awk '{print $3}')" > +len="$(echo "$bmap_str" | awk '{print $6}')" > +blksz=$(_get_file_block_size $SCRATCH_MNT) > +sectors_per_block=$((blksz / 512)) > + > +# Did we get at least 4 fs blocks worth of extent? > +min_len_sectors=$(( 4 * sectors_per_block )) > +test "$len" -lt $min_len_sectors && \ > + _fail "could not format a long enough extent on an empty fs??" > + > +phys_start=$(echo "$phys" | sed -e 's/\.\..*//g') > + > + > +echo ":$phys:$len:$blksz:$phys_start" >> $seqres.full > +echo "victim file:" >> $seqres.full > +od -tx1 -Ad -c $victim >> $seqres.full > + > +# Reset the dmerror table so that all IO will pass through. > +_dmerror_reset_table > + > +cat >> $seqres.full << ENDL > +dmerror before: > +$DMERROR_TABLE > +<end table> > +ENDL > + > +# Now mark /only/ the middle of the extent bad. > +_dmerror_mark_range_bad $(( phys_start + (2 * sectors_per_block) + 1 )) 1 > + > +cat >> $seqres.full << ENDL > +dmerror after marking bad: > +$DMERROR_TABLE > +<end table> > +ENDL > + > +_dmerror_load_error_table > + > +# See if the media scan picks it up. > +echo "Scrub for injected media error (single threaded)" > + > +# Once in single-threaded mode > +_scratch_scrub -b -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# Once in parallel mode > +echo "Scrub for injected media error (multi threaded)" > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# Remount to flush the page cache and reread to see the IO error > +_dmerror_unmount > +_dmerror_mount > +echo "victim file:" >> $seqres.full > +od -tx1 -Ad -c $victim >> $seqres.full 2> $tmp.error > +cat $tmp.error | _filter_scratch > + > +# Scrub again to re-confirm the media error across a remount > +echo "Scrub for injected media error (after remount)" > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# Now mark the bad range good. > +_dmerror_mark_range_good $(( phys_start + (2 * sectors_per_block) + 1 )) 1 > +_dmerror_load_error_table > + > +cat >> $seqres.full << ENDL > +dmerror after marking good: > +$DMERROR_TABLE > +<end table> > +ENDL > + > +echo "Scrub after removing injected media error" > + > +# Scrub one last time to make sure the error's gone. > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/747.out b/tests/xfs/747.out > new file mode 100644 > index 00000000..f85f1753 > --- /dev/null > +++ b/tests/xfs/747.out > @@ -0,0 +1,12 @@ > +QA output created by 747 > +Scrub for injected media error (single threaded) > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > +SCRATCH_MNT: unfixable errors found: 1 > +Scrub for injected media error (multi threaded) > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > +SCRATCH_MNT: unfixable errors found: 1 > +od: SCRATCH_MNT/a: read error: Input/output error > +Scrub for injected media error (after remount) > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > +SCRATCH_MNT: unfixable errors found: 1 > +Scrub after removing injected media error > diff --git a/tests/xfs/748 b/tests/xfs/748 > new file mode 100755 > index 00000000..130cc6f2 > --- /dev/null > +++ b/tests/xfs/748 > @@ -0,0 +1,102 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0-or-newer > +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. > +# > +# FS QA Test No. 748 > +# > +# Check xfs_scrub's media scan can actually return diagnostic information for > +# media errors in filesystem metadata. > + > +seq=`basename $0` > +seqres=$RESULT_DIR/$seq > +echo "QA output created by $seq" > + > +here=`pwd` > +tmp=/tmp/$$ > +status=1 # failure is the default! > +trap "_cleanup; exit \$status" 0 1 2 3 15 > + > +_cleanup() > +{ > + cd / > + rm -f $tmp.error $tmp.fsmap rm -f $tmp.* > + _dmerror_cleanup > +} > + > +# get standard environment, filters and checks > +. ./common/rc > +. ./common/fuzzy > +. ./common/filter > +. ./common/dmerror > + > +# real QA test starts here > +_supported_fs xfs > +_supported_os Linux > +_require_dm_target error > +_require_xfs_scratch_rmapbt Add a comment on why rmapbt is needed? Thanks, Eryu > +_require_scrub > + > +rm -f $seqres.full > + > +filter_scrub_errors() { > + _filter_scratch | sed -e "s/disk offset [0-9]*: /disk offset NNN: /g" \ > + -e "/errors found:/d" -e 's/phase6.c line [0-9]*/!/g' \ > + -e "/corruptions found:/d" | uniq > +} > + > +_scratch_mkfs > $tmp.mkfs > +_dmerror_init > +_dmerror_mount >> $seqres.full 2>&1 > + > +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" > + > +# Create a bunch of metadata so that we can mark them bad in the next step. > +victim=$SCRATCH_MNT/a > +$FSSTRESS_PROG -z -n 200 -p 10 \ > + -f creat=10 \ > + -f resvsp=1 \ > + -f truncate=1 \ > + -f punch=1 \ > + -f chown=5 \ > + -f mkdir=5 \ > + -f mknod=1 \ > + -d $victim >> $seqres.full 2>&1 > + > +# Mark all the metadata bad > +_dmerror_reset_table > +$XFS_IO_PROG -c "fsmap -n100 -vvv" $victim | grep inodes > $tmp.fsmap > +while read a b c crap; do > + phys="$(echo $c | sed -e 's/^.\([0-9]*\)\.\.\([0-9]*\).*$/\1:\2/g')" > + target_begin="$(echo "$phys" | cut -d ':' -f 1)" > + target_end="$(echo "$phys" | cut -d ':' -f 2)" > + > + _dmerror_mark_range_bad $target_begin $((target_end - target_begin)) > +done < $tmp.fsmap > +cat $tmp.fsmap >> $seqres.full > + > +cat >> $seqres.full << ENDL > +dmerror after marking bad: > +$DMERROR_TABLE > +<end table> > +ENDL > + > +_dmerror_load_error_table > + > +# See if the media scan picks it up. > +echo "Scrub for injected media error" > + > +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# Make the disk work again > +_dmerror_load_working_table > + > +echo "Scrub after removing injected media error" > + > +# Scrub one last time to make sure the error's gone. > +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error > +cat $tmp.error | filter_scrub_errors > + > +# success, all done > +status=0 > +exit > diff --git a/tests/xfs/748.out b/tests/xfs/748.out > new file mode 100644 > index 00000000..49dc2d7a > --- /dev/null > +++ b/tests/xfs/748.out > @@ -0,0 +1,5 @@ > +QA output created by 748 > +Scrub for injected media error > +Corruption: disk offset NNN: media error in inodes. (!) > +SCRATCH_MNT: Unmount and run xfs_repair. > +Scrub after removing injected media error > diff --git a/tests/xfs/group b/tests/xfs/group > index 18a593d9..3a58864b 100644 > --- a/tests/xfs/group > +++ b/tests/xfs/group > @@ -509,3 +509,5 @@ > 510 auto ioctl quick > 511 auto quick quota > 741 auto quick rw > +747 auto quick scrub > +748 auto quick scrub >
On Mon, Jan 06, 2020 at 03:58:30PM +0800, Eryu Guan wrote: > On Tue, Dec 10, 2019 at 09:38:38PM -0800, Darrick J. Wong wrote: > > From: Darrick J. Wong <darrick.wong@oracle.com> > > > > Add new helpers to dmerror to provide for marking selected ranges > > totally bad -- both reads and writes will fail. Create a new test for > > xfs_scrub to check that it reports media errors correctly. > > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> > > I hit assert failure when testing on v5.5-rc3+ kernel, is that an > expected result? Both test failed in the same way. Oh, my. That's a bogus assertion in xrep_calc_ag_resblks when CONFIG_XFS_ONLINE_REPAIR=n. That's definitely a kernel bug, though it's not related to this test. I'll start working on a fix, thank you for reporting this! > > [ 192.610313] xfs filesystem being mounted at /mnt/scratch supports timestamps until 2038 (0x7fffffff) > [ 193.149329] Buffer I/O error on dev dm-11, logical block 128, async page read > [ 193.150173] Buffer I/O error on dev dm-11, logical block 129, async page read > [ 193.151254] Buffer I/O error on dev dm-11, logical block 130, async page read > [ 193.152173] Buffer I/O error on dev dm-11, logical block 131, async page read > [ 193.152980] Buffer I/O error on dev dm-11, logical block 132, async page read > [ 193.153935] Buffer I/O error on dev dm-11, logical block 133, async page read > [ 193.154869] Buffer I/O error on dev dm-11, logical block 134, async page read > [ 193.155800] Buffer I/O error on dev dm-11, logical block 135, async page read > [ 193.249751] XFS: Assertion failed: !(sc->sm->sm_flags & XFS_SCRUB_IFLAG_REPAIR), file: fs/xfs/scrub/repair.h, line: 78 > [ 193.255979] ------------[ cut here ]------------ > [ 193.258406] kernel BUG at fs/xfs/xfs_message.c:110! > [ 193.260996] invalid opcode: 0000 [#1] SMP PTI > [ 193.263323] CPU: 0 PID: 5613 Comm: xfs_scrub Not tainted 5.5.0-rc3+ #44 > [ 193.266717] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 > [ 193.273736] RIP: 0010:assfail+0x23/0x28 [xfs] > [ 193.276045] Code: 67 fc ff ff 0f 0b c3 0f 1f 44 00 00 41 89 c8 48 89 d1 48 89 f2 48 c7 c6 78 e9 8d c0 e8 82 f9 ff ff 80 3d 9a d7 08 00 00 74 02 <0f> 0b 0f 0b c3 48 8b 03 48 c7 c7 68 ee 8d c0 c6 05 0e 2b 0a 00 01 > [ 193.284481] RSP: 0018:ffffac9540b7fbe0 EFLAGS: 00010202 > [ 193.286297] RAX: 0000000000000000 RBX: ffffac9540b7fcc8 RCX: 0000000000000000 > [ 193.288390] RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffc08d144a > [ 193.290235] RBP: ffffac9540b7fbf8 R08: 0000000000000000 R09: 0000000000000000 > [ 193.292083] R10: 000000000000000a R11: f000000000000000 R12: 0000000000000000 > [ 193.293589] R13: ffff90006701c000 R14: ffff900071746400 R15: ffff900071746558 > [ 193.295068] FS: 00007f91892cc740(0000) GS:ffff900078c00000(0000) knlGS:0000000000000000 > [ 193.296899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 193.297977] CR2: 0000000001ef0078 CR3: 0000000236050002 CR4: 00000000003606f0 > [ 193.299234] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 193.300555] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 193.301805] Call Trace: > [ 193.302296] xchk_setup_fs+0x35/0x40 [xfs] > [ 193.302937] xfs_scrub_metadata+0x23d/0x480 [xfs] > [ 193.303658] xfs_ioc_scrub_metadata+0x50/0xa0 [xfs] > [ 193.304417] xfs_file_ioctl+0xb23/0xc60 [xfs] > [ 193.305075] ? pagevec_lru_move_fn+0xbd/0xe0 > [ 193.305719] ? get_kernel_page+0x60/0x60 > [ 193.306321] ? __lru_cache_add+0x62/0x80 > [ 193.306922] ? __handle_mm_fault+0xc65/0x1930 > [ 193.307553] do_vfs_ioctl+0x448/0x6c0 > [ 193.308042] ? handle_mm_fault+0xc4/0x1f0 > [ 193.308572] ksys_ioctl+0x5e/0x90 > [ 193.309006] __x64_sys_ioctl+0x16/0x20 > [ 193.309501] do_syscall_64+0x5b/0x1d0 > [ 193.309990] entry_SYSCALL_64_after_hwframe+0x44/0xa9 > > > --- > > common/dmerror | 107 +++++++++++++++++++++++++++++++++++++++++- > > tests/xfs/747 | 136 +++++++++++++++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/747.out | 12 +++++ > > tests/xfs/748 | 102 ++++++++++++++++++++++++++++++++++++++++ > > tests/xfs/748.out | 5 ++ > > tests/xfs/group | 2 + > > 6 files changed, 363 insertions(+), 1 deletion(-) > > create mode 100755 tests/xfs/747 > > create mode 100644 tests/xfs/747.out > > create mode 100755 tests/xfs/748 > > create mode 100644 tests/xfs/748.out > > > > > > diff --git a/common/dmerror b/common/dmerror > > index ca1c7335..ee3051f1 100644 > > --- a/common/dmerror > > +++ b/common/dmerror > > @@ -62,7 +62,7 @@ _dmerror_load_error_table() > > $DMSETUP_PROG suspend $suspend_opt error-test > > [ $? -ne 0 ] && _fail "dmsetup suspend failed" > > > > - $DMSETUP_PROG load error-test --table "$DMERROR_TABLE" > > + echo "$DMERROR_TABLE" | $DMSETUP_PROG load error-test > > load_res=$? > > > > $DMSETUP_PROG resume error-test > > @@ -94,3 +94,108 @@ _dmerror_load_working_table() > > [ $load_res -ne 0 ] && _fail "dmsetup failed to load error table" > > [ $resume_res -ne 0 ] && _fail "dmsetup resume failed" > > } > > + > > +# Given a list of (start, length) tuples on stdin, combine adjacent tuples into > > +# larger ones and write the new list to stdout. > > +__dmerror_combine_extents() > > +{ > > + awk 'BEGIN{start = 0; len = 0;}{ > > $AWK_PROG Fixed all of these. > > > +if (start + len == $1) { > > + len += $2; > > +} else { > > + if (len > 0) > > + printf("%d %d\n", start, len); > > + start = $1; > > + len = $2; > > +} > > +} END { > > + if (len > 0) > > + printf("%d %d\n", start, len); > > +}' > > +} > > + > > +# Given a block device, the name of a preferred dm target, the name of an > > +# implied dm target, and a list of (start, len) tuples on stdin, create a new > > +# dm table which maps each of the tuples to the preferred target and all other > > +# areas to the implied dm target. > > +__dmerror_recreate_map() > > +{ > > + local device="$1" > > + local preferred_tgt="$2" > > + local implied_tgt="$3" > > + local size=$(blockdev --getsz "$device") > > + > > + awk -v device="$device" -v size=$size -v implied_tgt="$implied_tgt" \ > > Same here. > > > + -v preferred_tgt="$preferred_tgt" 'BEGIN{implied_start = 0;}{ > > + extent_start = $1; > > + extent_len = $2; > > + > > + if (extent_start > size) { > > + extent_start = size; > > + extent_len = 0; > > + } else if (extent_start + extent_len > size) { > > + extent_len = size - extent_start; > > + } > > + > > + if (implied_start < extent_start) > > + printf("%d %d %s %s %d\n", implied_start, > > + extent_start - implied_start, implied_tgt, > > + device, implied_start); > > + printf("%d %d %s %s %d\n", extent_start, extent_len, preferred_tgt, > > + device, extent_start); > > + implied_start = extent_start + extent_len; > > +}END{ > > + if (implied_start < size) > > + printf("%d %d %s %s %d\n", implied_start, size - implied_start, > > + implied_tgt, device, implied_start); > > +}' > > +} > > + > > +# Update the dm error table so that the range (start, len) maps to the > > +# preferred dm target, overriding anything that maps to the implied dm target. > > +# This assumes that the only desired targets for this dm device are the > > +# preferred and and implied targets. The optional fifth argument can be used > > +# to change the underlying device. > > +__dmerror_change() > > +{ > > + local start="$1" > > + local len="$2" > > + local preferred_tgt="$3" > > + local implied_tgt="$4" > > + local dm_backing_dev="$5" > > + test -z "$dm_backing_dev" && dm_backing_dev="$SCRATCH_DEV" > > + > > + DMERROR_TABLE="$( (echo "$DMERROR_TABLE"; echo "$start $len $preferred_tgt") | \ > > + awk -v type="$preferred_tgt" '{if ($3 == type) print $0;}' | \ > > Same here. > > > + sort -g | \ > > + __dmerror_combine_extents | \ > > + __dmerror_recreate_map "$dm_backing_dev" "$preferred_tgt" \ > > + "$implied_tgt" )" > > +} > > + > > +# Reset the dm error table to everything ok. The dm device itself must be > > +# remapped by calling _dmerror_load_error_table. > > +_dmerror_reset_table() > > +{ > > + DMERROR_TABLE="$DMLINEAR_TABLE" > > +} > > + > > +# Update the dm error table so that IOs to the given range will return EIO. > > +# The dm device itself must be remapped by calling _dmerror_load_error_table. > > +_dmerror_mark_range_bad() > > +{ > > + local start="$1" > > + local len="$2" > > + > > + __dmerror_change "$start" "$len" error linear > > +} > > + > > +# Update the dm error table so that IOs to the given range will succeed. > > +# The dm device itself must be remapped by calling _dmerror_load_error_table. > > +_dmerror_mark_range_good() > > +{ > > + local start="$1" > > + local len="$2" > > + > > + __dmerror_change "$start" "$len" linear error > > +} > > diff --git a/tests/xfs/747 b/tests/xfs/747 > > new file mode 100755 > > index 00000000..f5894411 > > --- /dev/null > > +++ b/tests/xfs/747 > > @@ -0,0 +1,136 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0-or-newer > > +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. > > +# > > +# FS QA Test No. 747 > > +# > > +# Check xfs_scrub's media scan can actually return diagnostic information for > > +# media errors in file data extents. > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.error > > rm -f $tmp.* > > would be find. Otherwise files like $tmp.mkfs are still there. Fixed this too. > > + _dmerror_cleanup > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/fuzzy > > +. ./common/filter > > +. ./common/dmerror > > + > > +# real QA test starts here > > +_supported_fs xfs > > +_supported_os Linux > > +_require_dm_target error > > +_require_scratch_xfs_crc > > +_require_scrub > > + > > +rm -f $seqres.full > > + > > +filter_scrub_errors() { > > + _filter_scratch | sed -e "s/offset $((blksz * 2)) /offset 2FSB /g" \ > > + -e "s/length $blksz.*/length 1FSB./g" > > +} > > + > > +_scratch_mkfs > $tmp.mkfs > > +_dmerror_init > > +_dmerror_mount >> $seqres.full 2>&1 > > + > > +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" > > + > > +victim=$SCRATCH_MNT/a > > +$XFS_IO_PROG -f -c "pwrite -S 0x58 0 1m" -c "fsync" $victim >> $seqres.full > > +bmap_str="$($XFS_IO_PROG -c "bmap -elpv" $victim | grep "^[[:space:]]*0:")" > > +echo "$bmap_str" >> $seqres.full > > + > > +phys="$(echo "$bmap_str" | awk '{print $3}')" > > +len="$(echo "$bmap_str" | awk '{print $6}')" > > +blksz=$(_get_file_block_size $SCRATCH_MNT) > > +sectors_per_block=$((blksz / 512)) > > + > > +# Did we get at least 4 fs blocks worth of extent? > > +min_len_sectors=$(( 4 * sectors_per_block )) > > +test "$len" -lt $min_len_sectors && \ > > + _fail "could not format a long enough extent on an empty fs??" > > + > > +phys_start=$(echo "$phys" | sed -e 's/\.\..*//g') > > + > > + > > +echo ":$phys:$len:$blksz:$phys_start" >> $seqres.full > > +echo "victim file:" >> $seqres.full > > +od -tx1 -Ad -c $victim >> $seqres.full > > + > > +# Reset the dmerror table so that all IO will pass through. > > +_dmerror_reset_table > > + > > +cat >> $seqres.full << ENDL > > +dmerror before: > > +$DMERROR_TABLE > > +<end table> > > +ENDL > > + > > +# Now mark /only/ the middle of the extent bad. > > +_dmerror_mark_range_bad $(( phys_start + (2 * sectors_per_block) + 1 )) 1 > > + > > +cat >> $seqres.full << ENDL > > +dmerror after marking bad: > > +$DMERROR_TABLE > > +<end table> > > +ENDL > > + > > +_dmerror_load_error_table > > + > > +# See if the media scan picks it up. > > +echo "Scrub for injected media error (single threaded)" > > + > > +# Once in single-threaded mode > > +_scratch_scrub -b -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# Once in parallel mode > > +echo "Scrub for injected media error (multi threaded)" > > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# Remount to flush the page cache and reread to see the IO error > > +_dmerror_unmount > > +_dmerror_mount > > +echo "victim file:" >> $seqres.full > > +od -tx1 -Ad -c $victim >> $seqres.full 2> $tmp.error > > +cat $tmp.error | _filter_scratch > > + > > +# Scrub again to re-confirm the media error across a remount > > +echo "Scrub for injected media error (after remount)" > > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# Now mark the bad range good. > > +_dmerror_mark_range_good $(( phys_start + (2 * sectors_per_block) + 1 )) 1 > > +_dmerror_load_error_table > > + > > +cat >> $seqres.full << ENDL > > +dmerror after marking good: > > +$DMERROR_TABLE > > +<end table> > > +ENDL > > + > > +echo "Scrub after removing injected media error" > > + > > +# Scrub one last time to make sure the error's gone. > > +_scratch_scrub -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/xfs/747.out b/tests/xfs/747.out > > new file mode 100644 > > index 00000000..f85f1753 > > --- /dev/null > > +++ b/tests/xfs/747.out > > @@ -0,0 +1,12 @@ > > +QA output created by 747 > > +Scrub for injected media error (single threaded) > > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > > +SCRATCH_MNT: unfixable errors found: 1 > > +Scrub for injected media error (multi threaded) > > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > > +SCRATCH_MNT: unfixable errors found: 1 > > +od: SCRATCH_MNT/a: read error: Input/output error > > +Scrub for injected media error (after remount) > > +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. > > +SCRATCH_MNT: unfixable errors found: 1 > > +Scrub after removing injected media error > > diff --git a/tests/xfs/748 b/tests/xfs/748 > > new file mode 100755 > > index 00000000..130cc6f2 > > --- /dev/null > > +++ b/tests/xfs/748 > > @@ -0,0 +1,102 @@ > > +#! /bin/bash > > +# SPDX-License-Identifier: GPL-2.0-or-newer > > +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. > > +# > > +# FS QA Test No. 748 > > +# > > +# Check xfs_scrub's media scan can actually return diagnostic information for > > +# media errors in filesystem metadata. > > + > > +seq=`basename $0` > > +seqres=$RESULT_DIR/$seq > > +echo "QA output created by $seq" > > + > > +here=`pwd` > > +tmp=/tmp/$$ > > +status=1 # failure is the default! > > +trap "_cleanup; exit \$status" 0 1 2 3 15 > > + > > +_cleanup() > > +{ > > + cd / > > + rm -f $tmp.error $tmp.fsmap > > rm -f $tmp.* > > > + _dmerror_cleanup > > +} > > + > > +# get standard environment, filters and checks > > +. ./common/rc > > +. ./common/fuzzy > > +. ./common/filter > > +. ./common/dmerror > > + > > +# real QA test starts here > > +_supported_fs xfs > > +_supported_os Linux > > +_require_dm_target error > > +_require_xfs_scratch_rmapbt > > Add a comment on why rmapbt is needed? "rmapbt is required to enable reporting of what metadata was lost." --D > Thanks, > Eryu > > > +_require_scrub > > + > > +rm -f $seqres.full > > + > > +filter_scrub_errors() { > > + _filter_scratch | sed -e "s/disk offset [0-9]*: /disk offset NNN: /g" \ > > + -e "/errors found:/d" -e 's/phase6.c line [0-9]*/!/g' \ > > + -e "/corruptions found:/d" | uniq > > +} > > + > > +_scratch_mkfs > $tmp.mkfs > > +_dmerror_init > > +_dmerror_mount >> $seqres.full 2>&1 > > + > > +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" > > + > > +# Create a bunch of metadata so that we can mark them bad in the next step. > > +victim=$SCRATCH_MNT/a > > +$FSSTRESS_PROG -z -n 200 -p 10 \ > > + -f creat=10 \ > > + -f resvsp=1 \ > > + -f truncate=1 \ > > + -f punch=1 \ > > + -f chown=5 \ > > + -f mkdir=5 \ > > + -f mknod=1 \ > > + -d $victim >> $seqres.full 2>&1 > > + > > +# Mark all the metadata bad > > +_dmerror_reset_table > > +$XFS_IO_PROG -c "fsmap -n100 -vvv" $victim | grep inodes > $tmp.fsmap > > +while read a b c crap; do > > + phys="$(echo $c | sed -e 's/^.\([0-9]*\)\.\.\([0-9]*\).*$/\1:\2/g')" > > + target_begin="$(echo "$phys" | cut -d ':' -f 1)" > > + target_end="$(echo "$phys" | cut -d ':' -f 2)" > > + > > + _dmerror_mark_range_bad $target_begin $((target_end - target_begin)) > > +done < $tmp.fsmap > > +cat $tmp.fsmap >> $seqres.full > > + > > +cat >> $seqres.full << ENDL > > +dmerror after marking bad: > > +$DMERROR_TABLE > > +<end table> > > +ENDL > > + > > +_dmerror_load_error_table > > + > > +# See if the media scan picks it up. > > +echo "Scrub for injected media error" > > + > > +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# Make the disk work again > > +_dmerror_load_working_table > > + > > +echo "Scrub after removing injected media error" > > + > > +# Scrub one last time to make sure the error's gone. > > +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error > > +cat $tmp.error | filter_scrub_errors > > + > > +# success, all done > > +status=0 > > +exit > > diff --git a/tests/xfs/748.out b/tests/xfs/748.out > > new file mode 100644 > > index 00000000..49dc2d7a > > --- /dev/null > > +++ b/tests/xfs/748.out > > @@ -0,0 +1,5 @@ > > +QA output created by 748 > > +Scrub for injected media error > > +Corruption: disk offset NNN: media error in inodes. (!) > > +SCRATCH_MNT: Unmount and run xfs_repair. > > +Scrub after removing injected media error > > diff --git a/tests/xfs/group b/tests/xfs/group > > index 18a593d9..3a58864b 100644 > > --- a/tests/xfs/group > > +++ b/tests/xfs/group > > @@ -509,3 +509,5 @@ > > 510 auto ioctl quick > > 511 auto quick quota > > 741 auto quick rw > > +747 auto quick scrub > > +748 auto quick scrub > >
diff --git a/common/dmerror b/common/dmerror index ca1c7335..ee3051f1 100644 --- a/common/dmerror +++ b/common/dmerror @@ -62,7 +62,7 @@ _dmerror_load_error_table() $DMSETUP_PROG suspend $suspend_opt error-test [ $? -ne 0 ] && _fail "dmsetup suspend failed" - $DMSETUP_PROG load error-test --table "$DMERROR_TABLE" + echo "$DMERROR_TABLE" | $DMSETUP_PROG load error-test load_res=$? $DMSETUP_PROG resume error-test @@ -94,3 +94,108 @@ _dmerror_load_working_table() [ $load_res -ne 0 ] && _fail "dmsetup failed to load error table" [ $resume_res -ne 0 ] && _fail "dmsetup resume failed" } + +# Given a list of (start, length) tuples on stdin, combine adjacent tuples into +# larger ones and write the new list to stdout. +__dmerror_combine_extents() +{ + awk 'BEGIN{start = 0; len = 0;}{ +if (start + len == $1) { + len += $2; +} else { + if (len > 0) + printf("%d %d\n", start, len); + start = $1; + len = $2; +} +} END { + if (len > 0) + printf("%d %d\n", start, len); +}' +} + +# Given a block device, the name of a preferred dm target, the name of an +# implied dm target, and a list of (start, len) tuples on stdin, create a new +# dm table which maps each of the tuples to the preferred target and all other +# areas to the implied dm target. +__dmerror_recreate_map() +{ + local device="$1" + local preferred_tgt="$2" + local implied_tgt="$3" + local size=$(blockdev --getsz "$device") + + awk -v device="$device" -v size=$size -v implied_tgt="$implied_tgt" \ + -v preferred_tgt="$preferred_tgt" 'BEGIN{implied_start = 0;}{ + extent_start = $1; + extent_len = $2; + + if (extent_start > size) { + extent_start = size; + extent_len = 0; + } else if (extent_start + extent_len > size) { + extent_len = size - extent_start; + } + + if (implied_start < extent_start) + printf("%d %d %s %s %d\n", implied_start, + extent_start - implied_start, implied_tgt, + device, implied_start); + printf("%d %d %s %s %d\n", extent_start, extent_len, preferred_tgt, + device, extent_start); + implied_start = extent_start + extent_len; +}END{ + if (implied_start < size) + printf("%d %d %s %s %d\n", implied_start, size - implied_start, + implied_tgt, device, implied_start); +}' +} + +# Update the dm error table so that the range (start, len) maps to the +# preferred dm target, overriding anything that maps to the implied dm target. +# This assumes that the only desired targets for this dm device are the +# preferred and and implied targets. The optional fifth argument can be used +# to change the underlying device. +__dmerror_change() +{ + local start="$1" + local len="$2" + local preferred_tgt="$3" + local implied_tgt="$4" + local dm_backing_dev="$5" + test -z "$dm_backing_dev" && dm_backing_dev="$SCRATCH_DEV" + + DMERROR_TABLE="$( (echo "$DMERROR_TABLE"; echo "$start $len $preferred_tgt") | \ + awk -v type="$preferred_tgt" '{if ($3 == type) print $0;}' | \ + sort -g | \ + __dmerror_combine_extents | \ + __dmerror_recreate_map "$dm_backing_dev" "$preferred_tgt" \ + "$implied_tgt" )" +} + +# Reset the dm error table to everything ok. The dm device itself must be +# remapped by calling _dmerror_load_error_table. +_dmerror_reset_table() +{ + DMERROR_TABLE="$DMLINEAR_TABLE" +} + +# Update the dm error table so that IOs to the given range will return EIO. +# The dm device itself must be remapped by calling _dmerror_load_error_table. +_dmerror_mark_range_bad() +{ + local start="$1" + local len="$2" + + __dmerror_change "$start" "$len" error linear +} + +# Update the dm error table so that IOs to the given range will succeed. +# The dm device itself must be remapped by calling _dmerror_load_error_table. +_dmerror_mark_range_good() +{ + local start="$1" + local len="$2" + + __dmerror_change "$start" "$len" linear error +} diff --git a/tests/xfs/747 b/tests/xfs/747 new file mode 100755 index 00000000..f5894411 --- /dev/null +++ b/tests/xfs/747 @@ -0,0 +1,136 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0-or-newer +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. +# +# FS QA Test No. 747 +# +# Check xfs_scrub's media scan can actually return diagnostic information for +# media errors in file data extents. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.error + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/fuzzy +. ./common/filter +. ./common/dmerror + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_dm_target error +_require_scratch_xfs_crc +_require_scrub + +rm -f $seqres.full + +filter_scrub_errors() { + _filter_scratch | sed -e "s/offset $((blksz * 2)) /offset 2FSB /g" \ + -e "s/length $blksz.*/length 1FSB./g" +} + +_scratch_mkfs > $tmp.mkfs +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" + +victim=$SCRATCH_MNT/a +$XFS_IO_PROG -f -c "pwrite -S 0x58 0 1m" -c "fsync" $victim >> $seqres.full +bmap_str="$($XFS_IO_PROG -c "bmap -elpv" $victim | grep "^[[:space:]]*0:")" +echo "$bmap_str" >> $seqres.full + +phys="$(echo "$bmap_str" | awk '{print $3}')" +len="$(echo "$bmap_str" | awk '{print $6}')" +blksz=$(_get_file_block_size $SCRATCH_MNT) +sectors_per_block=$((blksz / 512)) + +# Did we get at least 4 fs blocks worth of extent? +min_len_sectors=$(( 4 * sectors_per_block )) +test "$len" -lt $min_len_sectors && \ + _fail "could not format a long enough extent on an empty fs??" + +phys_start=$(echo "$phys" | sed -e 's/\.\..*//g') + + +echo ":$phys:$len:$blksz:$phys_start" >> $seqres.full +echo "victim file:" >> $seqres.full +od -tx1 -Ad -c $victim >> $seqres.full + +# Reset the dmerror table so that all IO will pass through. +_dmerror_reset_table + +cat >> $seqres.full << ENDL +dmerror before: +$DMERROR_TABLE +<end table> +ENDL + +# Now mark /only/ the middle of the extent bad. +_dmerror_mark_range_bad $(( phys_start + (2 * sectors_per_block) + 1 )) 1 + +cat >> $seqres.full << ENDL +dmerror after marking bad: +$DMERROR_TABLE +<end table> +ENDL + +_dmerror_load_error_table + +# See if the media scan picks it up. +echo "Scrub for injected media error (single threaded)" + +# Once in single-threaded mode +_scratch_scrub -b -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# Once in parallel mode +echo "Scrub for injected media error (multi threaded)" +_scratch_scrub -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# Remount to flush the page cache and reread to see the IO error +_dmerror_unmount +_dmerror_mount +echo "victim file:" >> $seqres.full +od -tx1 -Ad -c $victim >> $seqres.full 2> $tmp.error +cat $tmp.error | _filter_scratch + +# Scrub again to re-confirm the media error across a remount +echo "Scrub for injected media error (after remount)" +_scratch_scrub -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# Now mark the bad range good. +_dmerror_mark_range_good $(( phys_start + (2 * sectors_per_block) + 1 )) 1 +_dmerror_load_error_table + +cat >> $seqres.full << ENDL +dmerror after marking good: +$DMERROR_TABLE +<end table> +ENDL + +echo "Scrub after removing injected media error" + +# Scrub one last time to make sure the error's gone. +_scratch_scrub -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# success, all done +status=0 +exit diff --git a/tests/xfs/747.out b/tests/xfs/747.out new file mode 100644 index 00000000..f85f1753 --- /dev/null +++ b/tests/xfs/747.out @@ -0,0 +1,12 @@ +QA output created by 747 +Scrub for injected media error (single threaded) +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. +SCRATCH_MNT: unfixable errors found: 1 +Scrub for injected media error (multi threaded) +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. +SCRATCH_MNT: unfixable errors found: 1 +od: SCRATCH_MNT/a: read error: Input/output error +Scrub for injected media error (after remount) +Unfixable Error: SCRATCH_MNT/a: media error at data offset 2FSB length 1FSB. +SCRATCH_MNT: unfixable errors found: 1 +Scrub after removing injected media error diff --git a/tests/xfs/748 b/tests/xfs/748 new file mode 100755 index 00000000..130cc6f2 --- /dev/null +++ b/tests/xfs/748 @@ -0,0 +1,102 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0-or-newer +# Copyright (c) 2019, Oracle and/or its affiliates. All Rights Reserved. +# +# FS QA Test No. 748 +# +# Check xfs_scrub's media scan can actually return diagnostic information for +# media errors in filesystem metadata. + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.error $tmp.fsmap + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/fuzzy +. ./common/filter +. ./common/dmerror + +# real QA test starts here +_supported_fs xfs +_supported_os Linux +_require_dm_target error +_require_xfs_scratch_rmapbt +_require_scrub + +rm -f $seqres.full + +filter_scrub_errors() { + _filter_scratch | sed -e "s/disk offset [0-9]*: /disk offset NNN: /g" \ + -e "/errors found:/d" -e 's/phase6.c line [0-9]*/!/g' \ + -e "/corruptions found:/d" | uniq +} + +_scratch_mkfs > $tmp.mkfs +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +_supports_xfs_scrub $SCRATCH_MNT $SCRATCH_DEV || _notrun "Scrub not supported" + +# Create a bunch of metadata so that we can mark them bad in the next step. +victim=$SCRATCH_MNT/a +$FSSTRESS_PROG -z -n 200 -p 10 \ + -f creat=10 \ + -f resvsp=1 \ + -f truncate=1 \ + -f punch=1 \ + -f chown=5 \ + -f mkdir=5 \ + -f mknod=1 \ + -d $victim >> $seqres.full 2>&1 + +# Mark all the metadata bad +_dmerror_reset_table +$XFS_IO_PROG -c "fsmap -n100 -vvv" $victim | grep inodes > $tmp.fsmap +while read a b c crap; do + phys="$(echo $c | sed -e 's/^.\([0-9]*\)\.\.\([0-9]*\).*$/\1:\2/g')" + target_begin="$(echo "$phys" | cut -d ':' -f 1)" + target_end="$(echo "$phys" | cut -d ':' -f 2)" + + _dmerror_mark_range_bad $target_begin $((target_end - target_begin)) +done < $tmp.fsmap +cat $tmp.fsmap >> $seqres.full + +cat >> $seqres.full << ENDL +dmerror after marking bad: +$DMERROR_TABLE +<end table> +ENDL + +_dmerror_load_error_table + +# See if the media scan picks it up. +echo "Scrub for injected media error" + +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# Make the disk work again +_dmerror_load_working_table + +echo "Scrub after removing injected media error" + +# Scrub one last time to make sure the error's gone. +XFS_SCRUB_PHASE=6 _scratch_scrub -x >> $seqres.full 2> $tmp.error +cat $tmp.error | filter_scrub_errors + +# success, all done +status=0 +exit diff --git a/tests/xfs/748.out b/tests/xfs/748.out new file mode 100644 index 00000000..49dc2d7a --- /dev/null +++ b/tests/xfs/748.out @@ -0,0 +1,5 @@ +QA output created by 748 +Scrub for injected media error +Corruption: disk offset NNN: media error in inodes. (!) +SCRATCH_MNT: Unmount and run xfs_repair. +Scrub after removing injected media error diff --git a/tests/xfs/group b/tests/xfs/group index 18a593d9..3a58864b 100644 --- a/tests/xfs/group +++ b/tests/xfs/group @@ -509,3 +509,5 @@ 510 auto ioctl quick 511 auto quick quota 741 auto quick rw +747 auto quick scrub +748 auto quick scrub