diff mbox series

watchdog: qcom: Use platform_get_irq_optional() for bark irq

Message ID 20191213064934.4112-1-saiprakash.ranjan@codeaurora.org (mailing list archive)
State Mainlined
Commit e0b4f4e0cf7fa9d62628d4249c765ec18dffd143
Headers show
Series watchdog: qcom: Use platform_get_irq_optional() for bark irq | expand

Commit Message

Sai Prakash Ranjan Dec. 13, 2019, 6:49 a.m. UTC
platform_get_irq() prints an error message when the interrupt
is not available. So on platforms where bark interrupt is
not specified, following error message is observed on SDM845.

[    2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found

This is also seen on SC7180, SM8150 SoCs as well.
Fix this by using platform_get_irq_optional() instead.

Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
---
 drivers/watchdog/qcom-wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Andersson Dec. 13, 2019, 7:15 a.m. UTC | #1
On Thu 12 Dec 22:49 PST 2019, Sai Prakash Ranjan wrote:

> platform_get_irq() prints an error message when the interrupt
> is not available. So on platforms where bark interrupt is
> not specified, following error message is observed on SDM845.
> 
> [    2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found
> 
> This is also seen on SC7180, SM8150 SoCs as well.
> Fix this by using platform_get_irq_optional() instead.
> 
> Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available")
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  drivers/watchdog/qcom-wdt.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index a494543d3ae1..eb47fe5ed280 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -246,7 +246,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  	}
>  
>  	/* check if there is pretimeout support */
> -	irq = platform_get_irq(pdev, 0);
> +	irq = platform_get_irq_optional(pdev, 0);
>  	if (irq > 0) {
>  		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
>  				       IRQF_TRIGGER_RISING,
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
Guenter Roeck Dec. 13, 2019, 1:51 p.m. UTC | #2
On 12/12/19 10:49 PM, Sai Prakash Ranjan wrote:
> platform_get_irq() prints an error message when the interrupt
> is not available. So on platforms where bark interrupt is
> not specified, following error message is observed on SDM845.
> 
> [    2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found
> 
> This is also seen on SC7180, SM8150 SoCs as well.
> Fix this by using platform_get_irq_optional() instead.
> 
> Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available")
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   drivers/watchdog/qcom-wdt.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index a494543d3ae1..eb47fe5ed280 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -246,7 +246,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>   	}
>   
>   	/* check if there is pretimeout support */
> -	irq = platform_get_irq(pdev, 0);
> +	irq = platform_get_irq_optional(pdev, 0);
>   	if (irq > 0) {
>   		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
>   				       IRQF_TRIGGER_RISING,
>
Stephen Boyd Dec. 16, 2019, 4:48 p.m. UTC | #3
Quoting Sai Prakash Ranjan (2019-12-12 22:49:34)
> platform_get_irq() prints an error message when the interrupt
> is not available. So on platforms where bark interrupt is
> not specified, following error message is observed on SDM845.
> 
> [    2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found
> 
> This is also seen on SC7180, SM8150 SoCs as well.
> Fix this by using platform_get_irq_optional() instead.
> 
> Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available")
> Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index a494543d3ae1..eb47fe5ed280 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -246,7 +246,7 @@  static int qcom_wdt_probe(struct platform_device *pdev)
 	}
 
 	/* check if there is pretimeout support */
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq > 0) {
 		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
 				       IRQF_TRIGGER_RISING,