@@ -1617,13 +1617,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -1603,13 +1603,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -1617,13 +1617,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
@@ -1602,13 +1602,13 @@
#size-cells = <2>;
bus-range = <0x00 0xff>;
device_type = "pci";
- ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
- 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
- 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
- 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
/* Map all possible DDR as inbound ranges */
- dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
- 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>,
+ <0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
To improve human readability and enable automatic validation, the tuples in the "ranges" and "dma-ranges" properties of PCI devices nodes should be grouped. Not doing so causes "make dtbs_check" to emit warnings like: pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not valid under any of the given schemas (Possible causes of the failure): pcie@fe000000: dma-ranges: [[1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0]] is not of type 'boolean' pcie@fe000000: dma-ranges:0: [1107296256, 0, 1073741824, 0, 1073741824, 0, 2147483648, 1124073472, 2, 0, 2, 0, 1, 0] is too long Fix this by grouping the tuples of the "ranges" and "dma-ranges" properties using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- I still see e.g.: arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges: [[33554432, 0, 3993501696, 0, 3993501696, 0, 65536]] is not valid under any of the given schemas (Possible causes of the failure): arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges: True was expected arch/arm/boot/dts/r8a7791-koelsch.dt.yaml: soc: pci@ee090000:ranges:0: [33554432, 0, 3993501696, 0, 3993501696, 0, 65536] is too long --- arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7744.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7790.dtsi | 12 ++++++------ arch/arm/boot/dts/r8a7791.dtsi | 12 ++++++------ 4 files changed, 24 insertions(+), 24 deletions(-)