[RFC,v6,01/13] media: i2c: max9286: Add GPIO chip controller
diff mbox series

Message ID 20191216102930.5867-2-kieran.bingham+renesas@ideasonboard.com
State New
Delegated to: Kieran Bingham
Headers show
Series
  • GMSL Renesas Platform Support
Related show

Commit Message

Kieran Bingham Dec. 16, 2019, 10:29 a.m. UTC
From: Kieran Bingham <kieran.bingham@ideasonboard.com>

Provide a GPIO chip to control the two output lines available on the
MAX9286.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
---
 drivers/media/i2c/max9286.c | 66 +++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)

Patch
diff mbox series

diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 4761e0b92ba2..df77871e603c 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -14,6 +14,7 @@ 
 #include <linux/device.h>
 #include <linux/fwnode.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/module.h>
@@ -59,6 +60,8 @@ 
 #define MAX9286_HVSRC_D0		(2 << 0)
 #define MAX9286_HVSRC_D14		(1 << 0)
 #define MAX9286_HVSRC_D18		(0 << 0)
+/* Register 0x0f */
+#define MAX9286_0X0F_RESERVED		BIT(3)
 /* Register 0x12 */
 #define MAX9286_CSILANECNT(n)		(((n) - 1) << 6)
 #define MAX9286_CSIDBL			BIT(5)
@@ -147,6 +150,9 @@  struct max9286_priv {
 	struct regulator *regulator;
 	bool poc_enabled;
 
+	struct gpio_chip gpio;
+	u8 gpio_state;
+
 	struct i2c_mux_core *mux;
 	unsigned int mux_channel;
 	bool mux_open;
@@ -714,6 +720,58 @@  static const struct of_device_id max9286_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, max9286_dt_ids);
 
+static void max9286_gpio_set(struct gpio_chip *chip,
+			     unsigned int offset, int value)
+{
+	struct max9286_priv *priv = gpiochip_get_data(chip);
+
+	if (value)
+		priv->gpio_state |= BIT(offset);
+	else
+		priv->gpio_state &= ~BIT(offset);
+
+	max9286_write(priv, 0x0f, MAX9286_0X0F_RESERVED | priv->gpio_state);
+}
+
+static int max9286_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct max9286_priv *priv = gpiochip_get_data(chip);
+
+	return priv->gpio_state & BIT(offset);
+}
+
+static int max9286_gpio(struct max9286_priv *priv)
+{
+	struct device *dev = &priv->client->dev;
+	struct gpio_chip *gpio = &priv->gpio;
+	int ret;
+
+	static const char * const names[] = {
+		"GPIO0OUT",
+		"GPIO1OUT",
+	};
+
+	/* Configure the GPIO */
+	gpio->label = dev_name(dev);
+	gpio->parent = dev;
+	gpio->owner = THIS_MODULE;
+	gpio->of_node = dev->of_node;
+	gpio->ngpio = 2;
+	gpio->set = max9286_gpio_set;
+	gpio->get = max9286_gpio_get;
+	gpio->can_sleep = true;
+	gpio->names = names;
+
+	/* GPIO values default to high */
+	priv->gpio_state = BIT(0) | BIT(1);
+
+	ret = devm_gpiochip_add_data(dev, gpio, priv);
+	if (ret)
+		dev_err(dev, "Unable to create gpio_chip\n");
+
+	return ret;
+}
+
 static int max9286_init(struct device *dev)
 {
 	struct max9286_priv *priv;
@@ -994,6 +1052,14 @@  static int max9286_probe(struct i2c_client *client)
 	gpiod_set_consumer_name(priv->gpiod_pwdn, "max9286-pwdn");
 	gpiod_set_value_cansleep(priv->gpiod_pwdn, 1);
 
+	/*
+	 * It is possible to set up the power regulator from the GPIO lines,
+	 * so it needs to be set up early.
+	 */
+	ret = max9286_gpio(priv);
+	if (ret)
+		return ret;
+
 	priv->regulator = regulator_get(&client->dev, "poc");
 	if (IS_ERR(priv->regulator)) {
 		if (PTR_ERR(priv->regulator) != -EPROBE_DEFER)