@@ -272,9 +272,6 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
d->dev_caps |= HS_CHANNELS_RESERVED;
- if (platform_get_irq_byname(pdev, "0") < 0)
- d->dev_caps |= DMA_ENGINE_HANDLE_IRQ;
-
/* Check the capabilities register for descriptor loading feature */
if (dma_read(CAPS_0, 0) & DMA_HAS_DESCRIPTOR_CAPS)
dma_common_ch_end = CCDN;
@@ -88,22 +88,6 @@ struct dma_link_info {
};
-static struct dma_link_info *dma_linked_lch;
-
-#ifndef CONFIG_ARCH_OMAP1
-
-/* Chain handling macros */
-#define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
- (0 == dma_linked_lch[chain_id].q_count)
-#define __OMAP_DMA_CHAIN_INCQ(end) \
- ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
-#define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
- do { \
- __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
- dma_linked_lch[chain_id].q_count--; \
- } while (0)
-#endif
-
static int dma_lch_count;
static int dma_chan_count;
static int omap_dma_reserve_channels;
@@ -469,12 +453,6 @@ static inline void enable_lnk(int lch)
if (dma_chan[lch].next_lch != -1)
l = dma_chan[lch].next_lch | (1 << 15);
-#ifndef CONFIG_ARCH_OMAP1
- if (dma_omap2plus())
- if (dma_chan[lch].next_linked_ch != -1)
- l = dma_chan[lch].next_linked_ch | (1 << 15);
-#endif
-
p->dma_write(l, CLNK_CTRL, lch);
}
@@ -501,42 +479,6 @@ static inline void disable_lnk(int lch)
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
-static inline void omap2_enable_irq_lch(int lch)
-{
- u32 val;
- unsigned long flags;
-
- if (dma_omap1())
- return;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- /* clear IRQ STATUS */
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
- /* Enable interrupt */
- val = p->dma_read(IRQENABLE_L0, lch);
- val |= 1 << lch;
- p->dma_write(val, IRQENABLE_L0, lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
-static inline void omap2_disable_irq_lch(int lch)
-{
- u32 val;
- unsigned long flags;
-
- if (dma_omap1())
- return;
-
- spin_lock_irqsave(&dma_chan_lock, flags);
- /* Disable interrupt */
- val = p->dma_read(IRQENABLE_L0, lch);
- val &= ~(1 << lch);
- p->dma_write(val, IRQENABLE_L0, lch);
- /* clear IRQ STATUS */
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-}
-
int omap_request_dma(int dev_id, const char *dev_name,
void (*callback)(int lch, u16 ch_status, void *data),
void *data, int *dma_ch_out)
@@ -565,9 +507,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
if (p->clear_lch_regs)
p->clear_lch_regs(free_ch);
- if (dma_omap2plus())
- omap_clear_dma(free_ch);
-
spin_unlock_irqrestore(&dma_chan_lock, flags);
chan->dev_name = dev_name;
@@ -575,20 +514,10 @@ int omap_request_dma(int dev_id, const char *dev_name,
chan->data = data;
chan->flags = 0;
-#ifndef CONFIG_ARCH_OMAP1
- if (dma_omap2plus()) {
- chan->chain_id = -1;
- chan->next_linked_ch = -1;
- }
-#endif
-
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
if (dma_omap1())
chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
- else if (dma_omap2plus())
- chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
- OMAP2_DMA_TRANS_ERR_IRQ;
if (dma_omap16xx()) {
/* If the sync device is set, configure it dynamically. */
@@ -605,11 +534,6 @@ int omap_request_dma(int dev_id, const char *dev_name,
p->dma_write(dev_id, CCR, free_ch);
}
- if (dma_omap2plus()) {
- omap_enable_channel_irq(free_ch);
- omap2_enable_irq_lch(free_ch);
- }
-
*dma_ch_out = free_ch;
return 0;
@@ -626,20 +550,12 @@ void omap_free_dma(int lch)
return;
}
- /* Disable interrupt for logical channel */
- if (dma_omap2plus())
- omap2_disable_irq_lch(lch);
-
/* Disable all DMA interrupts for the channel. */
omap_disable_channel_irq(lch);
/* Make sure the DMA transfer is stopped. */
p->dma_write(0, CCR, lch);
- /* Clear registers */
- if (dma_omap2plus())
- omap_clear_dma(lch);
-
spin_lock_irqsave(&dma_chan_lock, flags);
dma_chan[lch].dev_id = -1;
dma_chan[lch].next_lch = -1;
@@ -989,109 +905,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
#define omap1_dma_irq_handler NULL
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-static int omap2_dma_handle_ch(int ch)
-{
- u32 status = p->dma_read(CSR, ch);
-
- if (!status) {
- if (printk_ratelimit())
- pr_warn("Spurious DMA IRQ for lch %d\n", ch);
- p->dma_write(1 << ch, IRQSTATUS_L0, ch);
- return 0;
- }
- if (unlikely(dma_chan[ch].dev_id == -1)) {
- if (printk_ratelimit())
- pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
- status, ch);
- return 0;
- }
- if (unlikely(status & OMAP_DMA_DROP_IRQ))
- pr_info("DMA synchronization event drop occurred with device %d\n",
- dma_chan[ch].dev_id);
- if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
- printk(KERN_INFO "DMA transaction error with device %d\n",
- dma_chan[ch].dev_id);
- if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
- u32 ccr;
-
- ccr = p->dma_read(CCR, ch);
- ccr &= ~OMAP_DMA_CCR_EN;
- p->dma_write(ccr, CCR, ch);
- dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
- }
- }
- if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
- printk(KERN_INFO "DMA secure error with device %d\n",
- dma_chan[ch].dev_id);
- if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
- printk(KERN_INFO "DMA misaligned error with device %d\n",
- dma_chan[ch].dev_id);
-
- p->dma_write(status, CSR, ch);
- p->dma_write(1 << ch, IRQSTATUS_L0, ch);
- /* read back the register to flush the write */
- p->dma_read(IRQSTATUS_L0, ch);
-
- /* If the ch is not chained then chain_id will be -1 */
- if (dma_chan[ch].chain_id != -1) {
- int chain_id = dma_chan[ch].chain_id;
- dma_chan[ch].state = DMA_CH_NOTSTARTED;
- if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
- dma_chan[dma_chan[ch].next_linked_ch].state =
- DMA_CH_STARTED;
- if (dma_linked_lch[chain_id].chain_mode ==
- OMAP_DMA_DYNAMIC_CHAIN)
- disable_lnk(ch);
-
- if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
- OMAP_DMA_CHAIN_INCQHEAD(chain_id);
-
- status = p->dma_read(CSR, ch);
- p->dma_write(status, CSR, ch);
- }
-
- if (likely(dma_chan[ch].callback != NULL))
- dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
- return 0;
-}
-
-/* STATUS register count is from 1-32 while our is 0-31 */
-static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
-{
- u32 val, enable_reg;
- int i;
-
- val = p->dma_read(IRQSTATUS_L0, 0);
- if (val == 0) {
- if (printk_ratelimit())
- printk(KERN_WARNING "Spurious DMA IRQ\n");
- return IRQ_HANDLED;
- }
- enable_reg = p->dma_read(IRQENABLE_L0, 0);
- val &= enable_reg; /* Dispatch only relevant interrupts */
- for (i = 0; i < dma_lch_count && val != 0; i++) {
- if (val & 1)
- omap2_dma_handle_ch(i);
- val >>= 1;
- }
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction omap24xx_dma_irq = {
- .name = "DMA",
- .handler = omap2_dma_irq_handler,
-};
-
-#else
-static struct irqaction omap24xx_dma_irq;
-#endif
-
-/*----------------------------------------------------------------------------*/
-
/*
* Note that we are currently using only IRQENABLE_L0 and L1.
* As the DSP may be using IRQENABLE_L2 and L3, let's not
@@ -1139,7 +952,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
int ch, ret = 0;
int dma_irq;
char irq_name[4];
- int irq_rel;
p = pdev->dev.platform_data;
if (!p) {
@@ -1165,21 +977,9 @@ static int omap_system_dma_probe(struct platform_device *pdev)
if (!dma_chan)
return -ENOMEM;
- if (dma_omap2plus()) {
- dma_linked_lch = kcalloc(dma_lch_count,
- sizeof(*dma_linked_lch),
- GFP_KERNEL);
- if (!dma_linked_lch) {
- ret = -ENOMEM;
- goto exit_dma_lch_fail;
- }
- }
-
spin_lock_init(&dma_chan_lock);
for (ch = 0; ch < dma_chan_count; ch++) {
omap_clear_dma(ch);
- if (dma_omap2plus())
- omap2_disable_irq_lch(ch);
dma_chan[ch].dev_id = -1;
dma_chan[ch].next_lch = -1;
@@ -1216,22 +1016,6 @@ static int omap_system_dma_probe(struct platform_device *pdev)
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
- strcpy(irq_name, "0");
- dma_irq = platform_get_irq_byname(pdev, irq_name);
- if (dma_irq < 0) {
- dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
- ret = dma_irq;
- goto exit_dma_lch_fail;
- }
- ret = setup_irq(dma_irq, &omap24xx_dma_irq);
- if (ret) {
- dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
- dma_irq, ret);
- goto exit_dma_lch_fail;
- }
- }
-
/* reserve dma channels 0 and 1 in high security devices on 34xx */
if (d->dev_caps & HS_CHANNELS_RESERVED) {
pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
@@ -1242,34 +1026,21 @@ static int omap_system_dma_probe(struct platform_device *pdev)
return 0;
exit_dma_irq_fail:
- dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
- dma_irq, ret);
- for (irq_rel = 0; irq_rel < ch; irq_rel++) {
- dma_irq = platform_get_irq(pdev, irq_rel);
- free_irq(dma_irq, (void *)(irq_rel + 1));
- }
-
-exit_dma_lch_fail:
return ret;
}
static int omap_system_dma_remove(struct platform_device *pdev)
{
- int dma_irq;
+ int dma_irq, irq_rel = 0;
- if (dma_omap2plus()) {
- char irq_name[4];
- strcpy(irq_name, "0");
- dma_irq = platform_get_irq_byname(pdev, irq_name);
- if (dma_irq >= 0)
- remove_irq(dma_irq, &omap24xx_dma_irq);
- } else {
- int irq_rel = 0;
- for ( ; irq_rel < dma_chan_count; irq_rel++) {
- dma_irq = platform_get_irq(pdev, irq_rel);
- free_irq(dma_irq, (void *)(irq_rel + 1));
- }
+ if (dma_omap2plus())
+ return 0;
+
+ for ( ; irq_rel < dma_chan_count; irq_rel++) {
+ dma_irq = platform_get_irq(pdev, irq_rel);
+ free_irq(dma_irq, (void *)(irq_rel + 1));
}
+
return 0;
}
@@ -129,7 +129,6 @@
#define IS_WORD_16 BIT(0xd)
#define ENABLE_16XX_MODE BIT(0xe)
#define HS_CHANNELS_RESERVED BIT(0xf)
-#define DMA_ENGINE_HANDLE_IRQ BIT(0x10)
/* Defines for DMA Capabilities */
#define DMA_HAS_TRANSPARENT_CAPS (0x1 << 18)
@@ -239,9 +238,6 @@ struct omap_dma_lch {
void (*callback)(int lch, u16 ch_status, void *data);
void *data;
long flags;
- /* required for Dynamic chaining */
- int prev_linked_ch;
- int next_linked_ch;
int state;
int chain_id;
int status;
All device tree probing omap SoCs only have device drivers that are using Linux dmaengine API with the IRQENABLE_L1 interrupts. Only omap1 is still using old legacy dma. This means we can remove the legacy sdma interrupt handling for IRQENABLE_L0, and only rely on the dmaengine driver using IRQENABLE_L1. The legacy code still allocates the channels, but that will be deal with in the following patches. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/dma.c | 3 - arch/arm/plat-omap/dma.c | 245 ++------------------------------------ include/linux/omap-dma.h | 4 - 3 files changed, 8 insertions(+), 244 deletions(-)