[v3,2/2] pwm: keep the trigger register after pwm setting.

Commit Message

Jitao Shi Dec. 17, 2019, 3:04 a.m. UTC

Move the trigger after pwm setting to avoid the pwm wrong signal
output.

Remove the regist enable trigger setting in probe.
Move the trigger to end of mtk_disp_pwm_config().

Signed-off-by: Jitao Shi <[e-mail]>
---
 drivers/pwm/pwm-mtk-disp.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

Patch

diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index c7b14acc9316..c1aae5b5693b 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -122,6 +122,13 @@  static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
+	} else {
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
 	}
 
 	clk_disable_unprepare(mdp->clk_mm);
@@ -207,19 +214,6 @@  static int mtk_disp_pwm_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mdp);
 
-	/*
-	 * For MT2701, disable double buffer before writing register
-	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-	 */
-	if (!mdp->data->has_commit) {
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
-	}
-
 	return 0;
 }