[GIT,PULL,v2,00/27] block, scsi: final compat_ioctl cleanup
mbox

Message ID 20191217221708.3730997-1-arnd@arndb.de
State New
Headers show

Pull-request

git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git tags/block-ioctl-cleanup-5.6

Message

Arnd Bergmann Dec. 17, 2019, 10:16 p.m. UTC
The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground.git tags/block-ioctl-cleanup-5.6

for you to fetch changes up to 3462d5c19dac7c062c5a2db727775116e6d2b28e:

  Documentation: document ioctl interfaces better (2019-12-17 22:45:18 +0100)

----------------------------------------------------------------
block, scsi: final compat_ioctl cleanup

This series concludes the work I did for linux-5.5 on the compat_ioctl()
cleanup, killing off fs/compat_ioctl.c and block/compat_ioctl.c by moving
everything into drivers.

Overall this would be a reduction both in complexity and line count, but
as I'm also adding documentation the overall number of lines increases
in the end.

My plan was originally to keep the SCSI and block parts separate.
This did not work easily because of interdependencies: I cannot
do the final SCSI cleanup in a good way without first addressing the
CDROM ioctls, so this is one series that I hope could be merged through
either the block or the scsi git trees, or possibly both if you can
pull in the same branch.

The series comes in these steps:

1. clean up the sg v3 interface as suggested by Linus. I have
   talked about this with Doug Gilbert as well, and he would
   rebase his sg v4 patches on top of "compat: scsi: sg: fix v3
   compat read/write interface"

2. Actually moving handlers out of block/compat_ioctl.c and
   block/scsi_ioctl.c into drivers, mixed in with cleanup
   patches

3. Document how to do this right. I keep getting asked about this,
   and it helps to point to some documentation file.

The branch is based on another one that fixes a couple of bugs found
during the creation of this series.

Changes since the original version [1]:

- move out the bugfixes into a branch for itself
- clean up scsi sg driver further as suggested by Christoph Hellwig
- avoid some ifdefs by moving compat_ptr() out of asm/compat.h
- split out the blkdev_compat_ptr_ioctl function; bug spotted by
  Ben Hutchings
- Improve formatting of documentation

[1] https://lore.kernel.org/linux-block/20191211204306.1207817-1-arnd@arndb.de/T/#m9f89df30565fc66abbded5d01f4db553b16f129f

----------------------------------------------------------------

Arnd Bergmann (22): (plus five from the first pull request)
  compat: ARM64: always include asm-generic/compat.h
  compat: provide compat_ptr() on all architectures
  compat: scsi: sg: fix v3 compat read/write interface
  compat_ioctl: block: add blkdev_compat_ptr_ioctl
  compat_ioctl: ubd, aoe: use blkdev_compat_ptr_ioctl
  compat_ioctl: move CDROM_SEND_PACKET handling into scsi
  compat_ioctl: move CDROMREADADIO to cdrom.c
  compat_ioctl: cdrom: handle CDROM_LAST_WRITTEN
  compat_ioctl: block: handle cdrom compat ioctl in non-cdrom drivers
  compat_ioctl: add scsi_compat_ioctl
  compat_ioctl: bsg: add handler
  compat_ioctl: ide: floppy: add handler
  compat_ioctl: scsi: move ioctl handling into drivers
  compat_ioctl: move sys_compat_ioctl() to ioctl.c
  compat_ioctl: simplify the implementation
  compat_ioctl: move cdrom commands into cdrom.c
  compat_ioctl: scsi: handle HDIO commands from drivers
  compat_ioctl: move HDIO ioctl handling into drivers/ide
  compat_ioctl: block: move blkdev_compat_ioctl() into ioctl.c
  compat_ioctl: block: simplify compat_blkpg_ioctl()
  compat_ioctl: simplify up block/ioctl.c
  Documentation: document ioctl interfaces better

 Documentation/core-api/index.rst       |   1 +
 Documentation/core-api/ioctl.rst       | 248 +++++++++++++++
 arch/arm64/include/asm/compat.h        |  22 +-
 arch/mips/include/asm/compat.h         |  18 --
 arch/parisc/include/asm/compat.h       |  17 -
 arch/powerpc/include/asm/compat.h      |  17 -
 arch/powerpc/oprofile/backtrace.c      |   2 +-
 arch/s390/include/asm/compat.h         |   6 +-
 arch/sparc/include/asm/compat.h        |  17 -
 arch/um/drivers/ubd_kern.c             |   1 +
 arch/x86/include/asm/compat.h          |  17 -
 block/Makefile                         |   1 -
 block/bsg.c                            |   1 +
 block/compat_ioctl.c                   | 411 -------------------------
 block/ioctl.c                          | 319 +++++++++++++++----
 block/scsi_ioctl.c                     | 214 ++++++++-----
 drivers/ata/libata-scsi.c              |   9 +
 drivers/block/aoe/aoeblk.c             |   1 +
 drivers/block/floppy.c                 |   3 +
 drivers/block/paride/pcd.c             |   3 +
 drivers/block/paride/pd.c              |   1 +
 drivers/block/paride/pf.c              |   1 +
 drivers/block/pktcdvd.c                |  26 +-
 drivers/block/sunvdc.c                 |   1 +
 drivers/block/virtio_blk.c             |   3 +
 drivers/block/xen-blkfront.c           |   1 +
 drivers/cdrom/cdrom.c                  |  35 ++-
 drivers/cdrom/gdrom.c                  |   3 +
 drivers/ide/ide-cd.c                   |  37 +++
 drivers/ide/ide-disk.c                 |   1 +
 drivers/ide/ide-floppy.c               |   4 +
 drivers/ide/ide-floppy.h               |   2 +
 drivers/ide/ide-floppy_ioctl.c         |  35 +++
 drivers/ide/ide-gd.c                   |  14 +
 drivers/ide/ide-ioctls.c               |  44 ++-
 drivers/ide/ide-tape.c                 |  11 +
 drivers/scsi/aic94xx/aic94xx_init.c    |   3 +
 drivers/scsi/ch.c                      |   9 +-
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c |   3 +
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c |   3 +
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |   3 +
 drivers/scsi/ipr.c                     |   3 +
 drivers/scsi/isci/init.c               |   3 +
 drivers/scsi/mvsas/mv_init.c           |   3 +
 drivers/scsi/pm8001/pm8001_init.c      |   3 +
 drivers/scsi/scsi_ioctl.c              |  54 +++-
 drivers/scsi/sd.c                      |  50 ++-
 drivers/scsi/sg.c                      | 170 +++++-----
 drivers/scsi/sr.c                      |  53 +++-
 drivers/scsi/st.c                      |  51 +--
 fs/Makefile                            |   2 +-
 fs/compat_ioctl.c                      | 261 ----------------
 fs/internal.h                          |   6 -
 fs/ioctl.c                             | 131 +++++---
 include/linux/blkdev.h                 |   7 +
 include/linux/compat.h                 |  18 ++
 include/linux/falloc.h                 |   2 -
 include/linux/fs.h                     |   4 -
 include/linux/ide.h                    |   2 +
 include/linux/libata.h                 |   6 +
 include/scsi/scsi_ioctl.h              |   1 +
 include/scsi/sg.h                      |  30 ++
 62 files changed, 1257 insertions(+), 1171 deletions(-)
 create mode 100644 Documentation/core-api/ioctl.rst
 delete mode 100644 block/compat_ioctl.c
 delete mode 100644 fs/compat_ioctl.c

Comments

Arnd Bergmann Dec. 18, 2019, 5:24 p.m. UTC | #1
On Tue, Dec 17, 2019 at 11:17 PM Arnd Bergmann <arnd@arndb.de> wrote:
> My plan was originally to keep the SCSI and block parts separate.
> This did not work easily because of interdependencies: I cannot
> do the final SCSI cleanup in a good way without first addressing the
> CDROM ioctls, so this is one series that I hope could be merged through
> either the block or the scsi git trees, or possibly both if you can
> pull in the same branch.

I have included the branch in my y2038 branch now, it should show up
in the following linux-next snapshots, but I'm still hoping for the block
or scsi maintainers to merge the pull request into their trees for v5.6

Jens, James, Martin:

Any suggestion for how this should be merged?

        Arnd
Martin K. Petersen Dec. 19, 2019, 3:18 a.m. UTC | #2
Hi Arnd!

> Any suggestion for how this should be merged?

I'm pretty flexible. When you post v3 I'll try to set up a branch to get
an idea what conflicts we might have to deal with. And then we can take
it from there.