diff mbox series

[v4,13/13] iommu/arm-smmu-v3: Add support for PCI PASID

Message ID 20191219163033.2608177-14-jean-philippe@linaro.org (mailing list archive)
State New, archived
Headers show
Series [v4,01/13] iommu/arm-smmu-v3: Drop __GFP_ZERO flag from DMA allocation | expand

Commit Message

Jean-Philippe Brucker Dec. 19, 2019, 4:30 p.m. UTC
Enable PASID for PCI devices that support it. Since the SSID tables are
allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
arm_smmu_dev_feature_enable() would be too late, since by that time the
main DMA domain has already been attached. Do it in add_device() instead.

Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
---
 drivers/iommu/arm-smmu-v3.c | 55 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 54 insertions(+), 1 deletion(-)

Comments

Eric Auger Dec. 20, 2019, 7:37 a.m. UTC | #1
Hi Jean,

On 12/19/19 5:30 PM, Jean-Philippe Brucker wrote:
> Enable PASID for PCI devices that support it. Since the SSID tables are
> allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
> arm_smmu_dev_feature_enable() would be too late, since by that time the
> main DMA domain has already been attached. Do it in add_device() instead.
> 
> Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric

> ---
>  drivers/iommu/arm-smmu-v3.c | 55 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 54 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index e62ca80f2f76..8e95ecad4c9a 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2644,6 +2644,53 @@ static void arm_smmu_disable_ats(struct arm_smmu_master *master)
>  	atomic_dec(&smmu_domain->nr_ats_masters);
>  }
>  
> +static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
> +{
> +	int ret;
> +	int features;
> +	int num_pasids;
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return -ENODEV;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	features = pci_pasid_features(pdev);
> +	if (features < 0)
> +		return features;
> +
> +	num_pasids = pci_max_pasids(pdev);
> +	if (num_pasids <= 0)
> +		return num_pasids;
> +
> +	ret = pci_enable_pasid(pdev, features);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to enable PASID\n");
> +		return ret;
> +	}
> +
> +	master->ssid_bits = min_t(u8, ilog2(num_pasids),
> +				  master->smmu->ssid_bits);
> +	return 0;
> +}
> +
> +static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
> +{
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	if (!pdev->pasid_enabled)
> +		return;
> +
> +	master->ssid_bits = 0;
> +	pci_disable_pasid(pdev);
> +}
> +
>  static void arm_smmu_detach_dev(struct arm_smmu_master *master)
>  {
>  	unsigned long flags;
> @@ -2852,13 +2899,16 @@ static int arm_smmu_add_device(struct device *dev)
>  
>  	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
>  
> +	/* Note that PASID must be enabled before, and disabled after ATS */
> +	arm_smmu_enable_pasid(master);
> +
>  	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
>  		master->ssid_bits = min_t(u8, master->ssid_bits,
>  					  CTXDESC_LINEAR_CDMAX);
>  
>  	ret = iommu_device_link(&smmu->iommu, dev);
>  	if (ret)
> -		goto err_free_master;
> +		goto err_disable_pasid;
>  
>  	group = iommu_group_get_for_dev(dev);
>  	if (IS_ERR(group)) {
> @@ -2871,6 +2921,8 @@ static int arm_smmu_add_device(struct device *dev)
>  
>  err_unlink:
>  	iommu_device_unlink(&smmu->iommu, dev);
> +err_disable_pasid:
> +	arm_smmu_disable_pasid(master);
>  err_free_master:
>  	kfree(master);
>  	fwspec->iommu_priv = NULL;
> @@ -2891,6 +2943,7 @@ static void arm_smmu_remove_device(struct device *dev)
>  	arm_smmu_detach_dev(master);
>  	iommu_group_remove_device(dev);
>  	iommu_device_unlink(&smmu->iommu, dev);
> +	arm_smmu_disable_pasid(master);
>  	kfree(master);
>  	iommu_fwspec_free(dev);
>  }
>
Will Deacon Jan. 14, 2020, 12:45 p.m. UTC | #2
On Thu, Dec 19, 2019 at 05:30:33PM +0100, Jean-Philippe Brucker wrote:
> Enable PASID for PCI devices that support it. Since the SSID tables are
> allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
> arm_smmu_dev_feature_enable() would be too late, since by that time the

What is arm_smmu_dev_feature_enable()?

> main DMA domain has already been attached. Do it in add_device() instead.
> 
> Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> ---
>  drivers/iommu/arm-smmu-v3.c | 55 ++++++++++++++++++++++++++++++++++++-
>  1 file changed, 54 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
> index e62ca80f2f76..8e95ecad4c9a 100644
> --- a/drivers/iommu/arm-smmu-v3.c
> +++ b/drivers/iommu/arm-smmu-v3.c
> @@ -2644,6 +2644,53 @@ static void arm_smmu_disable_ats(struct arm_smmu_master *master)
>  	atomic_dec(&smmu_domain->nr_ats_masters);
>  }
>  
> +static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
> +{
> +	int ret;
> +	int features;
> +	int num_pasids;
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return -ENODEV;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	features = pci_pasid_features(pdev);
> +	if (features < 0)
> +		return features;
> +
> +	num_pasids = pci_max_pasids(pdev);
> +	if (num_pasids <= 0)
> +		return num_pasids;
> +
> +	ret = pci_enable_pasid(pdev, features);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Failed to enable PASID\n");
> +		return ret;
> +	}
> +
> +	master->ssid_bits = min_t(u8, ilog2(num_pasids),
> +				  master->smmu->ssid_bits);
> +	return 0;
> +}
> +
> +static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
> +{
> +	struct pci_dev *pdev;
> +
> +	if (!dev_is_pci(master->dev))
> +		return;
> +
> +	pdev = to_pci_dev(master->dev);
> +
> +	if (!pdev->pasid_enabled)
> +		return;
> +
> +	master->ssid_bits = 0;
> +	pci_disable_pasid(pdev);
> +}
> +
>  static void arm_smmu_detach_dev(struct arm_smmu_master *master)
>  {
>  	unsigned long flags;
> @@ -2852,13 +2899,16 @@ static int arm_smmu_add_device(struct device *dev)
>  
>  	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
>  
> +	/* Note that PASID must be enabled before, and disabled after ATS */
> +	arm_smmu_enable_pasid(master);

Is that part of the PCIe specs? If so, please can you add a citation to the
comment?

Are there any other ordering requirements, i.e. with respect to enabling
substreams at the SMMU? For example, can a speculative ATS request provide
a PASID?

Will
Jean-Philippe Brucker Jan. 15, 2020, 7:57 a.m. UTC | #3
On Tue, Jan 14, 2020 at 12:45:42PM +0000, Will Deacon wrote:
> On Thu, Dec 19, 2019 at 05:30:33PM +0100, Jean-Philippe Brucker wrote:
> > Enable PASID for PCI devices that support it. Since the SSID tables are
> > allocated by arm_smmu_attach_dev(), PASID has to be enabled early enough.
> > arm_smmu_dev_feature_enable() would be too late, since by that time the
> 
> What is arm_smmu_dev_feature_enable()?

It's the implementation of the IOMMU op .dev_enable_feat(), which I'll add
later (called by a device driver to enable the SVA feature). I'll reword
this comment, since the only real requirement is enabling PASID before
ATS.

> >  static void arm_smmu_detach_dev(struct arm_smmu_master *master)
> >  {
> >  	unsigned long flags;
> > @@ -2852,13 +2899,16 @@ static int arm_smmu_add_device(struct device *dev)
> >  
> >  	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
> >  
> > +	/* Note that PASID must be enabled before, and disabled after ATS */
> > +	arm_smmu_enable_pasid(master);
> 
> Is that part of the PCIe specs? If so, please can you add a citation to the
> comment?

Yes (PCIe 4.0r1.0 10.5.1.3 ATS Control register).

> Are there any other ordering requirements, i.e. with respect to enabling
> substreams at the SMMU? For example, can a speculative ATS request provide
> a PASID?

You recent fix bfff88ec1afe ("iommu/arm-smmu-v3: Rework enabling/disabling
of ATS for PCI masters") should prevent from speculative ATS requests.
More generally both ATS and SSID are enabled and disabled at the same time
in the SMMU, when toggling STE.V, so any request arriving before STE
enablement will be aborted regardless of SSID.

Thanks,
Jean
diff mbox series

Patch

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index e62ca80f2f76..8e95ecad4c9a 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2644,6 +2644,53 @@  static void arm_smmu_disable_ats(struct arm_smmu_master *master)
 	atomic_dec(&smmu_domain->nr_ats_masters);
 }
 
+static int arm_smmu_enable_pasid(struct arm_smmu_master *master)
+{
+	int ret;
+	int features;
+	int num_pasids;
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return -ENODEV;
+
+	pdev = to_pci_dev(master->dev);
+
+	features = pci_pasid_features(pdev);
+	if (features < 0)
+		return features;
+
+	num_pasids = pci_max_pasids(pdev);
+	if (num_pasids <= 0)
+		return num_pasids;
+
+	ret = pci_enable_pasid(pdev, features);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to enable PASID\n");
+		return ret;
+	}
+
+	master->ssid_bits = min_t(u8, ilog2(num_pasids),
+				  master->smmu->ssid_bits);
+	return 0;
+}
+
+static void arm_smmu_disable_pasid(struct arm_smmu_master *master)
+{
+	struct pci_dev *pdev;
+
+	if (!dev_is_pci(master->dev))
+		return;
+
+	pdev = to_pci_dev(master->dev);
+
+	if (!pdev->pasid_enabled)
+		return;
+
+	master->ssid_bits = 0;
+	pci_disable_pasid(pdev);
+}
+
 static void arm_smmu_detach_dev(struct arm_smmu_master *master)
 {
 	unsigned long flags;
@@ -2852,13 +2899,16 @@  static int arm_smmu_add_device(struct device *dev)
 
 	master->ssid_bits = min(smmu->ssid_bits, fwspec->num_pasid_bits);
 
+	/* Note that PASID must be enabled before, and disabled after ATS */
+	arm_smmu_enable_pasid(master);
+
 	if (!(smmu->features & ARM_SMMU_FEAT_2_LVL_CDTAB))
 		master->ssid_bits = min_t(u8, master->ssid_bits,
 					  CTXDESC_LINEAR_CDMAX);
 
 	ret = iommu_device_link(&smmu->iommu, dev);
 	if (ret)
-		goto err_free_master;
+		goto err_disable_pasid;
 
 	group = iommu_group_get_for_dev(dev);
 	if (IS_ERR(group)) {
@@ -2871,6 +2921,8 @@  static int arm_smmu_add_device(struct device *dev)
 
 err_unlink:
 	iommu_device_unlink(&smmu->iommu, dev);
+err_disable_pasid:
+	arm_smmu_disable_pasid(master);
 err_free_master:
 	kfree(master);
 	fwspec->iommu_priv = NULL;
@@ -2891,6 +2943,7 @@  static void arm_smmu_remove_device(struct device *dev)
 	arm_smmu_detach_dev(master);
 	iommu_group_remove_device(dev);
 	iommu_device_unlink(&smmu->iommu, dev);
+	arm_smmu_disable_pasid(master);
 	kfree(master);
 	iommu_fwspec_free(dev);
 }