@@ -109,6 +109,17 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
+config DRM_PANEL_LEADTEK_LTK500HD1829
+ tristate "Leadtek LTK500HD1829 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Kingdisplay kd097d04
+ TFT-LCD modules. The panel has a 1536x2048 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host and has a built-in LED backlight.
+
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
+obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
new file mode 100644
@@ -0,0 +1,534 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Theobroma Systems Design und Consulting GmbH
+ *
+ * base on panel-kingdisplay-kd097d04.c
+ * Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+struct ltk500hd1829 {
+ struct device *dev;
+ struct drm_panel panel;
+ struct gpio_desc *reset_gpio;
+ struct regulator *vcc;
+ struct regulator *iovcc;
+ bool prepared;
+};
+
+struct ltk500hd1829_cmd {
+ char cmd;
+ char data;
+};
+
+/*
+ * There is no description in the Reference Manual about these commands.
+ * We received them from the vendor, so just use them as is.
+ */
+static const struct ltk500hd1829_cmd init_code[] = {
+ { 0xE0, 0x00 },
+ { 0xE1, 0x93 },
+ { 0xE2, 0x65 },
+ { 0xE3, 0xF8 },
+ { 0x80, 0x03 },
+ { 0xE0, 0x04 },
+ { 0x2D, 0x03 },
+ { 0xE0, 0x01 },
+ { 0x00, 0x00 },
+ { 0x01, 0xB6 },
+ { 0x03, 0x00 },
+ { 0x04, 0xC5 },
+ { 0x17, 0x00 },
+ { 0x18, 0xBF },
+ { 0x19, 0x01 },
+ { 0x1A, 0x00 },
+ { 0x1B, 0xBF },
+ { 0x1C, 0x01 },
+ { 0x1F, 0x7C },
+ { 0x20, 0x26 },
+ { 0x21, 0x26 },
+ { 0x22, 0x4E },
+ { 0x37, 0x09 },
+ { 0x38, 0x04 },
+ { 0x39, 0x08 },
+ { 0x3A, 0x1F },
+ { 0x3B, 0x1F },
+ { 0x3C, 0x78 },
+ { 0x3D, 0xFF },
+ { 0x3E, 0xFF },
+ { 0x3F, 0x00 },
+ { 0x40, 0x04 },
+ { 0x41, 0xA0 },
+ { 0x43, 0x0F },
+ { 0x44, 0x0A },
+ { 0x45, 0x24 },
+ { 0x55, 0x01 },
+ { 0x56, 0x01 },
+ { 0x57, 0xA5 },
+ { 0x58, 0x0A },
+ { 0x59, 0x4A },
+ { 0x5A, 0x38 },
+ { 0x5B, 0x10 },
+ { 0x5C, 0x19 },
+ { 0x5D, 0x7C },
+ { 0x5E, 0x64 },
+ { 0x5F, 0x54 },
+ { 0x60, 0x48 },
+ { 0x61, 0x44 },
+ { 0x62, 0x35 },
+ { 0x63, 0x3A },
+ { 0x64, 0x24 },
+ { 0x65, 0x3B },
+ { 0x66, 0x39 },
+ { 0x67, 0x37 },
+ { 0x68, 0x56 },
+ { 0x69, 0x41 },
+ { 0x6A, 0x47 },
+ { 0x6B, 0x2F },
+ { 0x6C, 0x23 },
+ { 0x6D, 0x13 },
+ { 0x6E, 0x02 },
+ { 0x6F, 0x08 },
+ { 0x70, 0x7C },
+ { 0x71, 0x64 },
+ { 0x72, 0x54 },
+ { 0x73, 0x48 },
+ { 0x74, 0x44 },
+ { 0x75, 0x35 },
+ { 0x76, 0x3A },
+ { 0x77, 0x22 },
+ { 0x78, 0x3B },
+ { 0x79, 0x39 },
+ { 0x7A, 0x38 },
+ { 0x7B, 0x52 },
+ { 0x7C, 0x41 },
+ { 0x7D, 0x47 },
+ { 0x7E, 0x2F },
+ { 0x7F, 0x23 },
+ { 0x80, 0x13 },
+ { 0x81, 0x02 },
+ { 0x82, 0x08 },
+ { 0xE0, 0x02 },
+ { 0x00, 0x57 },
+ { 0x01, 0x77 },
+ { 0x02, 0x44 },
+ { 0x03, 0x46 },
+ { 0x04, 0x48 },
+ { 0x05, 0x4A },
+ { 0x06, 0x4C },
+ { 0x07, 0x4E },
+ { 0x08, 0x50 },
+ { 0x09, 0x55 },
+ { 0x0A, 0x52 },
+ { 0x0B, 0x55 },
+ { 0x0C, 0x55 },
+ { 0x0D, 0x55 },
+ { 0x0E, 0x55 },
+ { 0x0F, 0x55 },
+ { 0x10, 0x55 },
+ { 0x11, 0x55 },
+ { 0x12, 0x55 },
+ { 0x13, 0x40 },
+ { 0x14, 0x55 },
+ { 0x15, 0x55 },
+ { 0x16, 0x57 },
+ { 0x17, 0x77 },
+ { 0x18, 0x45 },
+ { 0x19, 0x47 },
+ { 0x1A, 0x49 },
+ { 0x1B, 0x4B },
+ { 0x1C, 0x4D },
+ { 0x1D, 0x4F },
+ { 0x1E, 0x51 },
+ { 0x1F, 0x55 },
+ { 0x20, 0x53 },
+ { 0x21, 0x55 },
+ { 0x22, 0x55 },
+ { 0x23, 0x55 },
+ { 0x24, 0x55 },
+ { 0x25, 0x55 },
+ { 0x26, 0x55 },
+ { 0x27, 0x55 },
+ { 0x28, 0x55 },
+ { 0x29, 0x41 },
+ { 0x2A, 0x55 },
+ { 0x2B, 0x55 },
+ { 0x2C, 0x57 },
+ { 0x2D, 0x77 },
+ { 0x2E, 0x4F },
+ { 0x2F, 0x4D },
+ { 0x30, 0x4B },
+ { 0x31, 0x49 },
+ { 0x32, 0x47 },
+ { 0x33, 0x45 },
+ { 0x34, 0x41 },
+ { 0x35, 0x55 },
+ { 0x36, 0x53 },
+ { 0x37, 0x55 },
+ { 0x38, 0x55 },
+ { 0x39, 0x55 },
+ { 0x3A, 0x55 },
+ { 0x3B, 0x55 },
+ { 0x3C, 0x55 },
+ { 0x3D, 0x55 },
+ { 0x3E, 0x55 },
+ { 0x3F, 0x51 },
+ { 0x40, 0x55 },
+ { 0x41, 0x55 },
+ { 0x42, 0x57 },
+ { 0x43, 0x77 },
+ { 0x44, 0x4E },
+ { 0x45, 0x4C },
+ { 0x46, 0x4A },
+ { 0x47, 0x48 },
+ { 0x48, 0x46 },
+ { 0x49, 0x44 },
+ { 0x4A, 0x40 },
+ { 0x4B, 0x55 },
+ { 0x4C, 0x52 },
+ { 0x4D, 0x55 },
+ { 0x4E, 0x55 },
+ { 0x4F, 0x55 },
+ { 0x50, 0x55 },
+ { 0x51, 0x55 },
+ { 0x52, 0x55 },
+ { 0x53, 0x55 },
+ { 0x54, 0x55 },
+ { 0x55, 0x50 },
+ { 0x56, 0x55 },
+ { 0x57, 0x55 },
+ { 0x58, 0x40 },
+ { 0x59, 0x00 },
+ { 0x5A, 0x00 },
+ { 0x5B, 0x10 },
+ { 0x5C, 0x09 },
+ { 0x5D, 0x30 },
+ { 0x5E, 0x01 },
+ { 0x5F, 0x02 },
+ { 0x60, 0x30 },
+ { 0x61, 0x03 },
+ { 0x62, 0x04 },
+ { 0x63, 0x06 },
+ { 0x64, 0x6A },
+ { 0x65, 0x75 },
+ { 0x66, 0x0F },
+ { 0x67, 0xB3 },
+ { 0x68, 0x0B },
+ { 0x69, 0x06 },
+ { 0x6A, 0x6A },
+ { 0x6B, 0x10 },
+ { 0x6C, 0x00 },
+ { 0x6D, 0x04 },
+ { 0x6E, 0x04 },
+ { 0x6F, 0x88 },
+ { 0x70, 0x00 },
+ { 0x71, 0x00 },
+ { 0x72, 0x06 },
+ { 0x73, 0x7B },
+ { 0x74, 0x00 },
+ { 0x75, 0xBC },
+ { 0x76, 0x00 },
+ { 0x77, 0x05 },
+ { 0x78, 0x2E },
+ { 0x79, 0x00 },
+ { 0x7A, 0x00 },
+ { 0x7B, 0x00 },
+ { 0x7C, 0x00 },
+ { 0x7D, 0x03 },
+ { 0x7E, 0x7B },
+ { 0xE0, 0x04 },
+ { 0x09, 0x10 },
+ { 0x2B, 0x2B },
+ { 0x2E, 0x44 },
+ { 0xE0, 0x00 },
+ { 0xE6, 0x02 },
+ { 0xE7, 0x02 },
+ { 0x35, 0x00 },
+};
+
+static inline
+struct ltk500hd1829 *panel_to_ltk500hd1829(struct drm_panel *panel)
+{
+ return container_of(panel, struct ltk500hd1829, panel);
+}
+
+static int ltk500hd1829_unprepare(struct drm_panel *panel)
+{
+ struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ if (!ctx->prepared)
+ return 0;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
+ ret);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
+ ret);
+ }
+
+ /* 120ms to enter sleep mode */
+ msleep(120);
+
+ regulator_disable(ctx->iovcc);
+ regulator_disable(ctx->vcc);
+
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int ltk500hd1829_prepare(struct drm_panel *panel)
+{
+ struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ unsigned int i;
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ ret = regulator_enable(ctx->vcc);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev,
+ "Failed to enable vci supply: %d\n", ret);
+ return ret;
+ }
+ ret = regulator_enable(ctx->iovcc);
+ if (ret < 0) {
+ DRM_DEV_ERROR(ctx->dev,
+ "Failed to enable iovcc supply: %d\n", ret);
+ goto disable_vcc;
+ }
+
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ /* tRW: 10us */
+ usleep_range(10, 20);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+ /* tRT: >= 5ms */
+ usleep_range(5000, 6000);
+
+ for (i = 0; i < ARRAY_SIZE(init_code); i++) {
+ ret = mipi_dsi_generic_write(dsi, &init_code[i],
+ sizeof(struct ltk500hd1829_cmd));
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed towrite init cmds: %d\n",
+ ret);
+ goto disable_iovcc;
+ }
+ }
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
+ ret);
+ goto disable_iovcc;
+ }
+
+ /* 120ms to exit sleep mode */
+ msleep(120);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
+ ret);
+ goto disable_iovcc;
+ }
+
+ ctx->prepared = true;
+
+ return 0;
+
+disable_iovcc:
+ regulator_disable(ctx->iovcc);
+disable_vcc:
+ regulator_disable(ctx->vcc);
+ return ret;
+}
+
+static const struct drm_display_mode default_mode = {
+ .hdisplay = 720,
+ .hsync_start = 720 + 50,
+ .hsync_end = 720 + 50 + 50,
+ .htotal = 720 + 50 + 50 + 50,
+ .vdisplay = 1280,
+ .vsync_start = 1280 + 30,
+ .vsync_end = 1280 + 30 + 4,
+ .vtotal = 1280 + 30 + 4 + 12,
+ .vrefresh = 60,
+ .clock = 41600,
+ .width_mm = 62,
+ .height_mm = 110,
+};
+
+static int ltk500hd1829_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct ltk500hd1829 *ctx = panel_to_ltk500hd1829(panel);
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ DRM_DEV_ERROR(ctx->dev, "failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ connector->display_info.width_mm = mode->width_mm;
+ connector->display_info.height_mm = mode->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1;
+}
+
+static const struct drm_panel_funcs ltk500hd1829_funcs = {
+ .unprepare = ltk500hd1829_unprepare,
+ .prepare = ltk500hd1829_prepare,
+ .get_modes = ltk500hd1829_get_modes,
+};
+
+static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
+{
+ struct ltk500hd1829 *ctx;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ ctx->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(ctx->vcc)) {
+ ret = PTR_ERR(ctx->vcc);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "Failed to request vcc regulator: %d\n",
+ ret);
+ return ret;
+ }
+
+ ctx->iovcc = devm_regulator_get(dev, "iovcc");
+ if (IS_ERR(ctx->iovcc)) {
+ ret = PTR_ERR(ctx->iovcc);
+ if (ret != -EPROBE_DEFER)
+ DRM_DEV_ERROR(dev,
+ "Failed to request iovcc regulator: %d\n",
+ ret);
+ return ret;
+ }
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
+
+ drm_panel_init(&ctx->panel, &dsi->dev, <k500hd1829_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret) {
+ DRM_DEV_ERROR(dev, "Failed to find backlight: %d\n", ret);
+ return ret;
+ }
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void ltk500hd1829_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = drm_panel_unprepare(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
+ ret);
+
+ ret = drm_panel_disable(&ctx->panel);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
+ ret);
+}
+
+static int ltk500hd1829_remove(struct mipi_dsi_device *dsi)
+{
+ struct ltk500hd1829 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ltk500hd1829_shutdown(dsi);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
+ ret);
+
+ drm_panel_remove(&ctx->panel);
+
+ return 0;
+}
+
+static const struct of_device_id ltk500hd1829_of_match[] = {
+ { .compatible = "leadtek,ltk500hd1829", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ltk500hd1829_of_match);
+
+static struct mipi_dsi_driver ltk500hd1829_driver = {
+ .driver = {
+ .name = "panel-leadtek-ltk500hd1829",
+ .of_match_table = ltk500hd1829_of_match,
+ },
+ .probe = ltk500hd1829_probe,
+ .remove = ltk500hd1829_remove,
+ .shutdown = ltk500hd1829_shutdown,
+};
+module_mipi_dsi_driver(ltk500hd1829_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
+MODULE_DESCRIPTION("Leadtek LTK500HD1829 panel driver");
+MODULE_LICENSE("GPL v2");