[1/2] ath10k: Add optional qdss clk
diff mbox series

Message ID 20191223054855.3020665-2-bjorn.andersson@linaro.org
State New
Headers show
Series
  • ath10k: Enable QDSS clock on sm8150
Related show

Commit Message

Bjorn Andersson Dec. 23, 2019, 5:48 a.m. UTC
The WiFi firmware found on sm8150 requires that the QDSS clock is
ticking in order to operate, so add an optional clock to the binding to
allow this to be specified in the sm8150 dts and add the clock to the
list of clocks in the driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 2 +-
 drivers/net/wireless/ath/ath10k/snoc.c                         | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Rob Herring Jan. 8, 2020, 4:25 p.m. UTC | #1
On Sun, 22 Dec 2019 21:48:54 -0800, Bjorn Andersson wrote:
> The WiFi firmware found on sm8150 requires that the QDSS clock is
> ticking in order to operate, so add an optional clock to the binding to
> allow this to be specified in the sm8150 dts and add the clock to the
> list of clocks in the driver.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt | 2 +-
>  drivers/net/wireless/ath/ath10k/snoc.c                         | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
Kalle Valo Jan. 26, 2020, 10:25 a.m. UTC | #2
Bjorn Andersson <bjorn.andersson@linaro.org> wrote:

> The WiFi firmware found on sm8150 requires that the QDSS clock is
> ticking in order to operate, so add an optional clock to the binding to
> allow this to be specified in the sm8150 dts and add the clock to the
> list of clocks in the driver.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

57a3b60ddbfa ath10k: Add optional qdss clk

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 017128394a3e..3fc2cce4626b 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -50,7 +50,7 @@  Optional properties:
           entry in clock-names.
 - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
 	       "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
-	       "cxo_ref_clk_pin" for "qcom,wcn3990-wifi"
+	       "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
 	       compatible target.
 - qcom,msi_addr: MSI interrupt address.
 - qcom,msi_base: Base value to add before writing MSI data into
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 7e85c4916e7f..aeb4cca92c35 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -46,7 +46,7 @@  static const char * const ath10k_regulators[] = {
 };
 
 static const char * const ath10k_clocks[] = {
-	"cxo_ref_clk_pin",
+	"cxo_ref_clk_pin", "qdss",
 };
 
 static void ath10k_snoc_htc_tx_cb(struct ath10k_ce_pipe *ce_state);