[v2,11/11] arm64: dts: rockchip: Add PX30 LVDS
diff mbox series

Message ID 20191224143900.23567-12-miquel.raynal@bootlin.com
State New
Headers show
Series
  • Add PX30 LVDS support
Related show

Commit Message

Miquel Raynal Dec. 24, 2019, 2:39 p.m. UTC
Describe LVDS IP. Add the CRTC and LVDS relevant endpoints so they can
be linked together.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm64/boot/dts/rockchip/px30.dtsi | 37 ++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

Comments

Heiko Stübner Jan. 6, 2020, 11:50 a.m. UTC | #1
Am Dienstag, 24. Dezember 2019, 15:39:00 CET schrieb Miquel Raynal:
> Describe LVDS IP. Add the CRTC and LVDS relevant endpoints so they can
> be linked together.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

> +
> +			vopb_out_lvds: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&lvds_vopb_in>;
> +			};

> +
> +			vopl_out_lvds: endpoint@0 {
> +				reg = <0>;
> +				remote-endpoint = <&lvds_vopl_in>;
> +			};

applied for 5.6, with the endpoints becoming @1 after the dsi

Thanks
Heiko

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 672a3a2f42b9..f99988b08244 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -439,6 +439,33 @@ 
 			compatible = "rockchip,px30-io-voltage-domain";
 			status = "disabled";
 		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			rockchip,grf = <&grf>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				lvds_vopb_in: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+
+				lvds_vopl_in: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+		};
 	};
 
 	uart1: serial@ff158000 {
@@ -987,6 +1014,11 @@ 
 		vopb_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopb_out_lvds: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
 		};
 	};
 
@@ -1019,6 +1051,11 @@ 
 		vopl_out: port {
 			#address-cells = <1>;
 			#size-cells = <0>;
+
+			vopl_out_lvds: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
 		};
 	};