@@ -185,6 +185,7 @@ struct fsl_dspi {
struct spi_transfer *cur_transfer;
struct spi_message *cur_msg;
struct chip_data *cur_chip;
+ size_t progress;
size_t len;
const void *tx;
void *rx;
@@ -641,7 +642,7 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
u32 spi_tcr;
spi_take_timestamp_post(dspi->ctlr, dspi->cur_transfer,
- dspi->tx - dspi->bytes_per_word, !dspi->irq);
+ dspi->progress, !dspi->irq);
/* Get transfer counter (in number of SPI transfers). It was
* reset to 0 when transfer(s) were started.
@@ -650,6 +651,7 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
/* Update total number of bytes that were transferred */
msg->actual_length += spi_tcnt * dspi->bytes_per_word;
+ dspi->progress += spi_tcnt;
trans_mode = dspi->devtype_data->trans_mode;
if (trans_mode == DSPI_EOQ_MODE)
@@ -662,7 +664,7 @@ static int dspi_rxtx(struct fsl_dspi *dspi)
return 0;
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
- dspi->tx, !dspi->irq);
+ dspi->progress, !dspi->irq);
if (trans_mode == DSPI_EOQ_MODE)
dspi_eoq_write(dspi);
@@ -751,6 +753,7 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
dspi->rx = transfer->rx_buf;
dspi->rx_end = dspi->rx + transfer->len;
dspi->len = transfer->len;
+ dspi->progress = 0;
/* Validated transfer specific frame size (defaults applied) */
dspi->bits_per_word = transfer->bits_per_word;
dspi->bytes_per_word = DIV_ROUND_UP(dspi->bits_per_word, 8);
@@ -767,7 +770,7 @@ static int dspi_transfer_one_message(struct spi_controller *ctlr,
SPI_CTARE_DTCP(1));
spi_take_timestamp_pre(dspi->ctlr, dspi->cur_transfer,
- dspi->tx, !dspi->irq);
+ dspi->progress, !dspi->irq);
trans_mode = dspi->devtype_data->trans_mode;
switch (trans_mode) {
@@ -1499,8 +1499,7 @@ static void spi_pump_messages(struct kthread_work *work)
* advances its @tx buffer pointer monotonically.
* @ctlr: Pointer to the spi_controller structure of the driver
* @xfer: Pointer to the transfer being timestamped
- * @tx: Pointer to the current word within the xfer->tx_buf that the driver is
- * preparing to transmit right now.
+ * @progress: How many words (not bytes) have been transferred so far
* @irqs_off: If true, will disable IRQs and preemption for the duration of the
* transfer, for less jitter in time measurement. Only compatible
* with PIO drivers. If true, must follow up with
@@ -1510,21 +1509,19 @@ static void spi_pump_messages(struct kthread_work *work)
*/
void spi_take_timestamp_pre(struct spi_controller *ctlr,
struct spi_transfer *xfer,
- const void *tx, bool irqs_off)
+ size_t progress, bool irqs_off)
{
- u8 bytes_per_word = DIV_ROUND_UP(xfer->bits_per_word, 8);
-
if (!xfer->ptp_sts)
return;
if (xfer->timestamped_pre)
return;
- if (tx < (xfer->tx_buf + xfer->ptp_sts_word_pre * bytes_per_word))
+ if (progress < xfer->ptp_sts_word_pre)
return;
/* Capture the resolution of the timestamp */
- xfer->ptp_sts_word_pre = (tx - xfer->tx_buf) / bytes_per_word;
+ xfer->ptp_sts_word_pre = progress;
xfer->timestamped_pre = true;
@@ -1546,23 +1543,20 @@ EXPORT_SYMBOL_GPL(spi_take_timestamp_pre);
* timestamped.
* @ctlr: Pointer to the spi_controller structure of the driver
* @xfer: Pointer to the transfer being timestamped
- * @tx: Pointer to the current word within the xfer->tx_buf that the driver has
- * just transmitted.
+ * @progress: How many words (not bytes) have been transferred so far
* @irqs_off: If true, will re-enable IRQs and preemption for the local CPU.
*/
void spi_take_timestamp_post(struct spi_controller *ctlr,
struct spi_transfer *xfer,
- const void *tx, bool irqs_off)
+ size_t progress, bool irqs_off)
{
- u8 bytes_per_word = DIV_ROUND_UP(xfer->bits_per_word, 8);
-
if (!xfer->ptp_sts)
return;
if (xfer->timestamped_post)
return;
- if (tx < (xfer->tx_buf + xfer->ptp_sts_word_post * bytes_per_word))
+ if (progress < xfer->ptp_sts_word_post)
return;
ptp_read_system_postts(xfer->ptp_sts);
@@ -1573,7 +1567,7 @@ void spi_take_timestamp_post(struct spi_controller *ctlr,
}
/* Capture the resolution of the timestamp */
- xfer->ptp_sts_word_post = (tx - xfer->tx_buf) / bytes_per_word;
+ xfer->ptp_sts_word_post = progress;
xfer->timestamped_post = true;
}
@@ -689,10 +689,10 @@ extern void spi_finalize_current_transfer(struct spi_controller *ctlr);
/* Helper calls for driver to timestamp transfer */
void spi_take_timestamp_pre(struct spi_controller *ctlr,
struct spi_transfer *xfer,
- const void *tx, bool irqs_off);
+ size_t progress, bool irqs_off);
void spi_take_timestamp_post(struct spi_controller *ctlr,
struct spi_transfer *xfer,
- const void *tx, bool irqs_off);
+ size_t progress, bool irqs_off);
/* the spi driver core manages memory for the spi_controller classdev */
extern struct spi_controller *__spi_alloc_controller(struct device *host,
The API for PTP system timestamping (associating a SPI transaction with the system time at which it was transferred) is flawed: it assumes that the xfer->tx_buf pointer will always be present. This is, of course, not always the case. So introduce a "progress" variable that denotes how many word have been transferred. Fix the Freescale DSPI driver, the only user of the API so far, in the same patch. Fixes: b42faeee718c ("spi: Add a PTP system timestamp to the transfer structure") Fixes: d6b71dfaeeba ("spi: spi-fsl-dspi: Implement the PTP system timestamping for TCFQ mode") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- Sorry, resent because I had a typo in the address of the mailing list the first time. drivers/spi/spi-fsl-dspi.c | 9 ++++++--- drivers/spi/spi.c | 22 ++++++++-------------- include/linux/spi/spi.h | 4 ++-- 3 files changed, 16 insertions(+), 19 deletions(-)